Moxa ioPAC 5542-IEC-T [20/26] Analog input
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa ioPAC 5542-IEC-T [20/26] Analog input

Moxa ioPAC 5542-HSPA-C-T [20/26] Analog input
ioPAC 5500 Hardware ioPAC 5500 Hardware Introduction
3-6
Serial Communication Parameters
Parity:
None, Even, Odd
Data Bits:
7, 8
Stop
Bits: 1, 2
Flow Control:
RTS/CTS, XON/XOFF
Baudrate:
300 bps to 921.6 kbps
Serial Signals
RS
-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND, RI
RS
-422: Tx+, Tx-, Rx+, Rx-, GND
RS
-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS
-485-2w: Data+, Data-, GND
Inputs and Outputs
Analog Inputs:
8 channels
Digital Inputs:
8 channels
Configurable DIOs:
8 channels
Isolation:
3k VDC or 2k Vrms
Analog Input
Type: Differential Input
Resolution:
16 bits
I/O Mode:
Voltage / Current
Input Range:
0 to 10 VDC, -10 to 10 VDC, 0 to 20 mA, 4 to 20 mA (wire off)
Historical Data Buffering:
60KB per channel, 120 second data buffer at 250 Hz
Accuracy:
±0.1% FSR @ 25°C
±0.3% FSR @
-40 and 75°C
Sampling Rate:
• All channels: 2000 samples/sec
• Per channel: 250 samples/sec
Input Impedance:
2M ohms (min.)
Built
-in Resistor for Current Input: 120 ohms (min.)
Digital Input
Sensor Type:
Wet Contact (NPN or PNP), Dry Contact
I/O Mode:
DI or Event Counter
Dry Contact:
• On: short to GND
• Off: open
Wet Contact:
NPN (DI to GND):
• On: 0 to 3 VDC
• Off: 10 to 30 VDC
PNP (DI to GND):
• Off: 0 to 3 VDC
• On: 10 to 30 VDC
Common Type:
4 points per COM
Counter Frequency:
1 kHz
Digital Filtering Time Interval:
Software selectable (by 0.5 ms)
Digital Output
Type:
Sink
I/O Mode:
DO or Pulse Output
Pulse Output Frequency:
1 kHz
Over
-voltage Protection: 45 VDC
Over
-current Protection: 2.6 A (4 channels @ 650 mA)
Over
-temperature Shutdown: 175°C (typical), 150°C (min.)
Current Rating:
200 mA per channel

Содержание

Похожие устройства

Скачать