Moxa OnCell G3470A-LTE-EU [11/14] Led indicators
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa OnCell G3470A-LTE-EU [11/14] Led indicators

Moxa OnCell G3150A-LTE-EU [11/14] Led indicators
- 11 -
Console Pinouts for 10-pin or 8-pin RJ45
10-Pin
Description
8-Pin
1
–
2
DSR
1
3
RTS
2
4
GND
3
5
TxD
4
6
RxD
5
7
–
6
8
CTS
7
9
DTR
8
10
–
NOTE
The pin numbers for both 8
-pin and 10-
pin RJ45 connectors (and
ports) are typically not labeled on the connector (or port). Refer
to the pinout diagram above for details.
LED Indicators
The front panel of the Moxa OnCell G3150A-LTE contains several LED
indicators. The function of each LED is described in the table below:
Type
State
Meaning
Signal
(1 LED)
Blinking
The number of blinks indicate the cellular
signal level when connected to a cellular
network with an IP address.
Blink interval: 200 ms
Silent interval: 2 seconds
Number of Blinks RSSI Range
1 -113 < RSSI ≤ -89
2 -89 < RSSI ≤ -73
3 -73 < RSSI ≤ -51
PWR1/
PWR2
On
DC power source active
Off
Power is off
Ready Green On Steady on: System startup is complete and
the system is in operation.
Blinking
Blinking slowly at 1-second intervals: The
OnCell device has been located by the
Wireless Search Utility.
Off Power is off, or device is booting up.
Fault
On
Steady on: Device is booting up, or IP
address conflict.
Blinking slowly at 1-second intervals
: Cannot
get an IP address from the DHCP server
Off
Power is off, or no error condition exists.
2G / 3G
Blinking
GSM/GPRS/EDGE is connected.
Blinking interval: 500 ms
On
UMTS/HSPA is connected.
Off
GSM/GPRS/EDGE/UMTS/HSPA is
disconnected.
4G Amber
On
LTE is connected
Off
LTE is disconnected.

Содержание

Похожие устройства

Скачать