Moxa OnCell 5104-HSPA [9/34] Oncell central manager configuring your oncell and connected devices

OnCell Central Manager Configuring Your OnCell and Connected Devices

2-2

OnCell Central Manager Settings

After starting your OnCell’s web console configuration utility, click OnCell Central Manager Settings in

the navigation panel (not shown below) and then click OnCell Central Manager to open the settings page.

The OnCell Central Manager page includes two sections, Configuration and Control Port, described

separately below.

Configuration

Setting Description Factory Default

OnCell Central

Manager

Select Enable to allow your OnCell to connect to OnCell

Central Manager.

Disable

Manager IP Enter the public IP address that assigned to Oncell Central

Manager.

None

Auto reconnect period The number of seconds the OnCell will wait before attempting

to automatically reconnect to Oncell Central Manager (input

any integer between 10 and 1000).

Control Port

Setting Description Factory Default

Management

information port

This port is used to transfer status information of the OnCell

to OnCell Central Manager. The port number must match the

Information port configured in OnCell Central Manager. To

prevent port conflicts with other applications, you can set the

management information port to a different port number.

63201

Management

configuration port

This port is used to transfer configurations from the OnCell to

OnCell Central Manager. The port number must match the

Configuration port configured in OnCell Central Manager. To

prevent port conflicts with other applications, you can set the

management information port to a different port number.

63202

Telnet port The Telnet port is the TCP port in OnCell Central Manager

(the server) that is listening for a Telnet connection from

OnCells (the hosts). To prevent a TCP port conflict with other

applications, you can set the Telnet port to a different port

number.

63203