Moxa VPort P26A-1MP-T [9/23] Hardware installation

- 9 -

2. Restore to Factory Settings:

To restore the VPort 26A-1MP to the factory default settings, press the

reset button continuously until the System LED blinks in red. After the

system LED stops blinking, release the reset button. The POST process

will run, and the VPort will reboot. The System LED will light in green

when the VPort has finished rebooting.

RJ45 Ethernet Port

The RJ45 Ethernet port is for 10/100 Mbps network transmission, and the

PoE (Power-over-Ethernet, 802.3af) power supply for the VPort

P26A-1MP.

NOTE

The VPort P26A-1MP supports standard IEEE 802.3af

Power

-over-

Ethernet (PoE). The maximum power consumption is

about 5.8 watts.

NOTE

The equipment is designed for in-building installation only, and is

not intended to be connected to exposed (outdoor) networks.

First-Time Installation and Configuration

Before installing the VPort 26A-1MP, check to make sure that all items

listed in the Package Checklist are in the box. In addition, you will need

access to a notebook computer or PC equipped with an Ethernet port.

Hardware Installation

Step 1:

Open and remove the upper case.

Use the Security Torx to loosen the upper case screws.