M-Audio AUDIOPHILE USB [5/36] Guide to getting started quickly

2. Left Input and Right Input (RCA Analog Inputs): These jacks input

analog audio from a variety of external sources. Each jack is female

RCA, compatible with common male RCA cables. When plugs are

inserted into the 1/4” jacks, these RCA inputs are defeated.

3. Left Output and Right Output (RCA Analog Outputs): These jacks

output analog audio to a variety of external destinations. Each jack is

female RCA, compatible with common male RCA cables.

4. S/PDIF In: This RCA connector receives a S/PDIF signal from your

coaxial S/PDIF digital source such as a DAT,MiniDisc player or external

A/D converter. Use a quality digital cable, rated at 75 Ohms.

5. S/PDIF Out:This RCA connector sends a S/PDIF signal to your coaxial

S/PDIF digital target device such as a DAT, MiniDisc player or external

D/A converter. This output is also used as a digital multi-channel

surround output (Dolby,DTS,etc.) for DVD or Home Theater use.Use

a quality digital cable, rated at 75 Ohms.

6. USB Jack:This standard USB connector connects to the “device end”

of a standard USB cable (included).

7. 9V AC 1000 mA PSU Jack:This jack connects to the included power

supply, which connects to common house current. Use only a 2.5mm

plug with a 9V AC,1000 mA power rating.Using any other power supply

could give undesirable results and/or damage the Audiophile USB.

Guide to Getting Started Quickly

Here is what is required to get your Audiophile USB up and running:

1. Insert the included Drivers CD into your CD drive and locate the

Audiophile USB folder. Within that folder, open the folder for the

operating system that you are currently using and run the Audiophile

USB Installer program.

NOTE:Windows 98SE users will need the Microsoft Windows 98SE CD-ROM.

2. Plug the included power supply into your wall socket and the

Audiophile USB’s Power Jack.Then attach the Audiophile USB to your

computer with the included USB cable and power the unit “On.” (On

Windows, this will bring up the New Hardware Wizard, after which

installation will be complete.)

3. Configure your digital recording software to use the Audiophile USB as

its active audio device (see “Using the Audiophile USB with your

Software Application” and also your software application’s manual).

4. Hook up your digital and analog audio gear (see “Audiophile USB

Recording Tutorials”). Configure your Audiophile USB Control Panel

software for proper monitoring and playback.