Home Bar Smart Turbo [6/7] Problem possible cause solution
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Home Bar Smart Turbo [6/7] Problem possible cause solution

Home Bar Smart Turbo [6/7] Problem possible cause solution
1110
- Neither the device nor the accessories may be used
until the damage or defects have been corrected.
- Do not make any modications or repairs to the device
and accessories. Repairs may be made solely by our
authorized service personnel.
- Use only the original accessories that are included or
those recommended by the manufacturer otherwise
the warranty will be void.

- This device is provided exclusively for carbonating
drinking water with CO
2. The device may not be used
to carbonate other liquids, such as fruit juices, beer,
wine, or other prepared beverages. It is designed
for private use only and not suitable for commercial
implementation.
- Never place the device on or near heat sources (e.g.
stoves, heaters, etc.) and keep it out of direct sunlight.
- Always place the device on a level, stable, and water
resistant surface.
- The device must always be upright during operation.
- Never transport the cylinder while inserted in the
device- the cylinder and the device must always be
transported separately.
- Do not submerge the device under water and do not
clean it while in operation.
- Only use the device when a lled bottle is inserted.

- The device works only with plastic bottles of Limo
Bar brands. Use of other brand bottles will void the
warranty.
- Do not store the bottles below 1°C! DO NOT FREEZE!
- The bottles are heat-resistant to a maximum of 40°C.
Do not expose them to high temperatures and keep
them away from heat sources, such as direct sunlight,
stoves, heaters, etc.
- Never attempt to ll an empty bottle with CO
2!
- If deformed, scratched, or discolored, or if the
expiration date has already passed, the bottle may not
be used. Replace it with a new bottle.

- The device for carbonating tap water has been
designed to be used with the CO
2 cylinders of Soda
Quick and Home Bar brands only. To ensure that your
warranty remains valid, we recommend using only CO
2
cylinders adapted to your original model.
- Caution: The cylinder is under pressure!
- Always store the cylinder in a cool place. Do not
expose it to high temperatures above 50°C (direct
sunlight, heat sources such as stoves or heaters, etc.).
- If the cylinder is colder than room temperature, it must
be gradually brought up to room temperature—do not
place it on a heat source to speed up the process.
- If the cylinder is warmer than room temperature, let
it gradually cool down to room temperature. DO NOT
PLACE IT IN THE FREEZER!
- If the cylinder gets frozen, avoid any contact with skin.
- Risk of freeze burn.
- Do not remove the cylinder during the carbonation
process.

Our warranty is valid for 2 years from the date of
purchase (with proof of purchase). If any damages
or defects occur as a result of faulty workmanship or
material defects, please contact our customer service.
All defects in the system and its accessories caused
by improper handling, damage repair by unauthorized
third parties are not covered by the warranty. This
sparkling water system has been for private use only
and not suitable for commercial implementation. Use
only the original accessories that are included or those
recommended by the manufacturer, otherwise the
warranty will be deemed void.

The packing material is recyclable. Dispose of the
packaging in an environmentally conscious manner by
taking it to a recycling center.
Should you wish to discard the device, do so in an
environmentally conscious manner. The device does not
go to the household trash. Contact your local authorities
for more information.
Within the framework of our company‘s ongoing
development, we reserve the right to modify the product,
its packaging, or package inserts at any time.

If you have any questions or problems, please do not
hesitate to call our customer service department. Please
visit us at .
All rights reserved
  
Water is running into the drip tray during
carbonation.
The button was pressed for too long. Press the center button for 1 second once or
twice depending on the desired carbonation
intensity (see the table below).
The bottle is overlled. Fill the bottle only up to the maximum level
indicated. Pour out any excess water.
The bottle is locked after carbonation. The CO
2 excess has not been taken out
from the bottle.
Press the pressure relief button on the right
side till all the excess CO
2 has run out.
The water is overly carbonated. The Turbo bubble adjustment knob is in
position 3.
Choose a different position according to the
desired level of carbonation (see the table below).
The water is only slightly carbonated. The CO2 cylinder is empty. Change the CO2 cylinder as described in this
manual.
The Turbo bubble adjustment knob is in
position 1.
Choose a different position according to the
desired level of carbonation (see the table below).
The cylinder is too cold. Wait until the cylinder has adapted to room
temperature.
The pressure is relieved too early. Wait 5 to 10 seconds to allow CO
2 mix well
with the water, then press the pressure relief
button to let the excess of CO
2 out.
The tap water is too warm. Use cold drinking water.
The adapter is damaged.
Buy a new adapter from our authorized retailer or
contact our customer service department.




for 450 g/60 L CO2 cylinders
 + pressing 2 times water or soft drink - light carbonation 135
 + pressing 2 times water or soft drink - medium carbonation 135
 + pressing 2 times water or soft drink - strong carbonation 135
+ pressing 1 time
water or soft drink slightly sparkling with small bubbles
ideal for children and the elderly
270
+ pressing 2 times
water or soft drink – extremely strong carbonation 135

Push the center button and release immediately. Repeat if necessary to achieve the desired level of carbonation (see the table).
Wait 5 to 10 seconds to allow CO2 mix well with the water. Then press the pressure relief button (on the right side).
We advise not to push the center button more than 2 times. Pressing it additionally will increase the consumption of CO2 without a gain of sparkle.

2

Содержание

Похожие устройства

Скачать