Melitta F 750-102 Caffeo Barista TS [12/50] Positioning the appliance

First steps

ENGLISH

3.3 Positioning the appliance

Observe the following instructions:

ū Do not position the appliance in damp rooms.

ū Position the appliance on a stable, at and dry surface.

ū Do not position the appliance in the vicinity of sinks or the like.

ū Do not position the appliance on hot surfaces.

ū Position the appliance a sucient distance, approx. 10cm, away from

the wall and other objects. The space above the appliance should be at

least 20cm.

ū Route the power cable so that it cannot be damaged by edges or hot

surfaces.

3.4 Connecting the appliance

Observe the following instructions:

ū Check that the supply voltage matches the operating voltage specied

in the technical data (see table Technical data on page95).

ū Only connect the appliance to a properly installed earthing contact

socket. If in doubt, consult a specialist electrician.

ū The socket must be fused with at least a 10 A fuse.

3.5 Switching the appliance on for the rst time

During initial starting up, you can set the language, the time and the water

hardness. The settings can be changed at a later point in time (see chap-

ter 8 Changing basic settings on page80 and chapter 9.8 Setting the

water hardness on page91).

Use the enclosed test strip to determine the water hardness. Observe the

instructions on the test strip packaging and in table Water hardness range

on page95.

Information

We recommend pouring away the rst two cups of coee after initially

starting up.