Netgear WNDR4000 — настройка беспроводной сети: руководство по безопасности и подключению [29/104]

Превью страниц Страница 29 / 104

Chapter 3. Wireless Settings | 29

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

The PIN method displays this screen so you can enter the client security PIN number:

WPS PIN method

While the wireless router attempts to connect, the WPS LED on the front of the wireless

router blinks green. When the wireless router establishes a WPS connection, the LED is

solid green, and the wireless router WPS screen displays a confirmation message.

4. Repeat to add another WPS client to your network.

Wireless Settings Screen

The Wireless Settings screen lets you view or change the wireless network settings. When

you set up security, note the new settings and save them in a secure location.

Note: If you use a wireless computer to change the wireless network

name (SSID) or security options, you are disconnected when you

click Apply. To avoid this problem, use a computer with a wired

connection to access the wireless router.

Consider Every Device on Your Network

Before you begin, check the following:

• Every wireless computer has to be able to obtain an IP address by DHCP from the

wireless router as described in Use Standard TCP/IP Properties for DHCP on page 16.

• Each computer or wireless adapter in your network has to have the same SSID and

wireless mode (bandwidth/data rate) as the wireless router. Check that the wireless

adapter on each computer can support the mode and security option you want to use.

• The security option on each wireless device in the network has to match the wireless

router. For example, if you select a security option that requires a passphrase, be sure to

use same passphrase for each wireless computer in the network.