M-Audio Ozone Инструкция по эксплуатации онлайн [39/48] 19709

The keys on the M-Audio Ozone, in conjunction with the MIDI/SELECT

button, give you the extra programming capability that is unique to

M-Audio’s line of MIDI controllers (including the M-Audio Ozone, Oxygen8

and Radium).You can use the Data Entry key to enter in values, or the keys

that are labeled with numbers.The keys labeled for specific MIDI functions

can be used to assign that function to the data slider.The “Set Ctrl” key can

be used with the numeric value keys to program the rotary faders to send

MIDI controller information on specific MIDI channels.

MIDI Functions In Standalone Mode

To transmit MIDI data from your keyboard to other professional MIDI

instruments, purchase a standard MIDI cable and use it to connect the

MIDI OUT jack of your M-Audio Ozone labeled “Keyboard” to the MIDI

IN jack of the other instrument.

1. Power up the M-Audio Ozone.

2. Make sure that the M-Audio Ozone’s MIDI port ”transmit” channel

matches the MIDI “receive” channel of the other instrument.

3. Please refer to the diagram in the section entitled “Setting Up Your

MIDI Studio” for audio connections.

Default Settings of The M-Audio Ozone

The M-Audio Ozone will always select the following values as parameters

when the power is turned on.

•Transmit MIDI Channel no. 1

• Default Octave will be from C4(60) to C6(84)

• Default After Touch value will be 0

• Default Velocity value will be 0

• Default Reverb Depth value will be 64

•Default Pan Pot value will be 64

• Default Volume value will be 127

• Default CC Data value will be 0

•Default CC no. value will be 0

•Default Control Change (CC-00=0, CC-32=0) message to be transmitted

• Default Program Change (PG=1) message to be transmitted

• Default MIDI-controller knob-assignments on MIDI ch. 1

Utilizing the Programming Assignment Keys

This section contains the information you will need to program the

M-Audio Ozone, and to send any MIDI parameter data from the M-Audio

Ozone keyboard.You may set the data slider to send MIDI controller data