![Aten VS0108 [10/25] Sw o01 off](/img/pdf.png)
Aten VS0108 [10/25] Sw o01 off
![Aten VS0108 [10/25] Sw o01 off](/views2/1211545/page10/bga.png)
VS0102/04/08 RS-232 Control Tool
10
Switch Port Commands
The actions can also be performed by keying the command into the text box,
and clicking SEND or pressing the [Enter] key, as described below.
The available formulas for Switch Port commands are as follows:
1. Switch Command + Output Command + Port Number + Control
For example, to turn on output port 02, type the following:
sw o02 on
-or-
For example, to turn off output port 01, type the following:
sw o01 off
Possible Values
The following table shows the possible values for the Switch Port commands:
Command Description
sw Switch command.
Output Command Description
o Output command.
Port Number Description
yy 01-08 port (default is 01).
* All output ports.
Control Description
on Turn on the display.
off Turn off the display.
Содержание
- Rs 232 control tool user manual p.1
- Rs 232 control tool p.1
- Sj t 11364 2006 p.2
- Fcc information p.2
- Rs 232 control tool operation p.3
- Overview p.3
- Installing the rs 232 control tool p.3
- Installing net framework 2 p.3
- Before you begin p.3
- Gui main page p.8
- Switch port p.9
- Possible values p.10
- For example to turn on output port 02 type the following p.10
- For example to turn off output port 01 type the following p.10
- The following table shows the possible values for the switch port commands p.10
- The available formulas for switch port commands are as follows p.10
- The actions can also be performed by keying the command into the text box and clicking send or pressing the enter key as described below p.10
- Switch port commands p.10
- Switch command output command port number control p.10
- Sw o02 on p.10
- Sw o01 off p.10
- Value will be used p.11
- The port number command string can be skipped and the default p.11
- Switch port commands table p.11
- Note 1 each command string can be separated with a space p.11
- After commands are sent acknowledge messages are returned p.11
- Switch command for cascaded splitters p.12
- Edid mode p.13
- Edid command control p.14
- Edid auto p.14
- The following table shows the possible values for the edid commands p.14
- The actions can also be performed by keying the command into the text box and clicking send or pressing the enter key as described below p.14
- Possible values p.14
- For example to change the edid setting to auto type the following p.14
- Edid mode commands p.14
- Value will be used p.15
- The port number command string can be skipped and the default p.15
- Note 1 each command string can be separated with a space p.15
- Edid mode commands table p.15
- After commands are sent acknowledge messages are returned p.15
- Mute o04 on p.17
- Mute o04 off p.17
- Mute commands the actions can also be performed by keying the command into the text box and clicking send or pressing the enter key as described below p.17
- Mute command output command port number control p.17
- For example to turn on the audio for output port 04 type the following p.17
- For example to mute the audio for output port 04 type the following p.17
- The following table shows the possible values for the mute commands p.17
- Possible values p.17
- Value will be used p.18
- The port number command string can be skipped and the default p.18
- Note 1 each command string can be separated with a space p.18
- Mute commands table p.18
- After commands are sent acknowledge messages are returned p.18
- Read info p.19
- Read version p.20
- Read o03 video p.20
- Read info commands the actions can also be performed by keying the command into the text box and clicking send or pressing the enter key as described below p.20
- Read command output command port number control p.20
- Read command control p.20
- Possible values p.20
- For example to read the firmware version type the following p.20
- For example to display the video on off status for port 03 type the following p.20
- The following table shows the possible values for the read info commands p.20
- Value will be used p.21
- The port number command string can be skipped and the default p.21
- Read info commands table p.21
- Note 1 each command string can be separated with a space p.21
- After commands are sent acknowledge messages are returned p.21
- The following table shows the possible values for the reset commands p.23
- Reset o02 p.23
- Reset commands the actions can also be performed by keying the command into the text box and clicking send or pressing the enter key as described below p.23
- Reset command output command port number p.23
- Possible values p.23
- For example to reset port 02 back to the factory default settings type the following p.23
- The port number command string can be skipped and the default p.24
- Reset commands table p.24
- Note 1 each command string can be separated with a space p.24
- After commands are sent acknowledge messages are returned p.24
- Value will be used p.24
- Rs 232 setting p.25
Похожие устройства
-
Aten VS132Краткое руководство по установке -
Aten VS132Описание и спецификации продукта -
Aten VS102Руководство пользователя -
Aten VS98AКраткое руководство по установке -
Aten VS98AОписание и спецификации продукта -
Aten VS94AКраткое руководство по установке
-
Aten VS94AОписание и спецификации продукта
-
Aten VS92AОписание и спецификации продукта
-
Aten VS92AКраткое руководство по установке
-
Aten VS88Руководство пользователя -
Aten VS88Описание и спецификации продукта -
Aten VS84Руководство пользователя