![Aten VM5404D [67/118] Output options](/img/pdf.png)
Aten VM5404D [67/118] Output options
![Aten VM5404D [67/118] Output options](/views2/1211641/page67/bg43.png)
Chapter 4. Browser Operation
55
Output Options
The Output Options page is used to configure DVI Video options.
DVI Video Options
DVI Video Options allow you to set Seamless Switch options which determine
how a display performs when the input port is changed.
The Transition, Period and Scale Resolution apply only when Seamless
Switching is on.
Seamless Switch: Turning Seamless Switch on removes the video
distortion and delay seen when an input port is switched.
Use the drop-down menu to apply to all ports, or the ON/OFF
button to enable/disable Seamless Switching per port.
Transition: Allows you to fade the video display when the input port is
changed. Use the period option to set the fade speed.
Use the drop-down menu to apply to all ports, or ON/OFF button
to enable/disable Transitions per port.
Period: Sets the fade speed for the Transition option.
Use the drop-down menu to apply an option (Slow, Normal, or
Fast) to all ports, or lower drop-down menus to apply options per
port.
Scale Resolution: Forces the port to scale the video displayed to the
selected resolution. Options are: 720x576@50HZ, 1024x768@60HZ,
Содержание
- Vm5404d vm5808d user manual p.1
- Emc information p.2
- This product has been classified as information technology equipment p.3
- The following contains information that relates to china p.3
- Sj t 11364 2006 p.3
- Safety p.3
- User notice p.4
- User information p.4
- Telephone support p.4
- Online registration p.4
- Package contents p.5
- Introduction p.6
- Hardware setup p.6
- Front panel configuration p.6
- Contents p.6
- Chapter 3 p.6
- Chapter 2 p.6
- Chapter 1 p.6
- Chapter 4 p.7
- Browser operation p.7
- Chapter 5 p.9
- Appendix p.9
- Rs 232 commands p.9
- About this manual p.10
- This manual uses the following conventions p.11
- Product information p.11
- For information about all aten products and how they can help you connect without limits visit aten on the web or contact an aten authorized reseller visit aten on the web for a list of locations and telephone numbers p.11
- Conventions p.11
- This page intentionally left blank p.12
- Overview p.13
- Introduction p.13
- Chapter 1 p.13
- Features p.14
- Source devices p.15
- Requirements p.15
- Display devices p.15
- Cables p.15
- Browsers p.16
- Supported web browsers are shown in the table below p.16
- Supported operating systems are shown in the table below p.16
- Source device operating systems p.16
- Vm5404d front view p.17
- Components p.17
- Vm5404d rear view p.18
- Vm5808d front view p.19
- Vm5808d rear view p.20
- The vm5404d s ir remote control only supports use of the 1 4 input p.21
- Ir remote control p.21
- And 1 4 output pushbuttons p.21
- This page intentionally left blank p.22
- Rack mounting p.23
- Hardware setup p.23
- Chapter 2 p.23
- Grounding p.24
- Cable connection p.25
- Vm5404d vm5808d user manual p.26
- Installation diagram p.26
- Overview p.27
- Front panel pushbuttons p.27
- Front panel configuration p.27
- Chapter 3 p.27
- Enter password p.28
- Port switching p.29
- Main screen p.29
- Input port selection p.29
- Output port selection p.31
- The vm5404d vm5808d has a built in configuration utility via the front panel lcd which can be controlled by pressing the menu and front panel input pushbuttons 1 8 user can cycle through the menu options starting from ip setting page in the order shown in the table below p.33
- Note the highlighted values are the default settings of the vm5404d p.33
- Lcd menu organization p.33
- Chapter 3 front panel configuration p.33
- Vm5808d p.33
- Menu pushbutton p.34
- Ip setting p.34
- Ip address subnet mask p.34
- Gateway p.35
- Serial port setting p.36
- Baud rate p.36
- Operation mode p.37
- Edid mode p.37
- Output status p.39
- Security mode p.41
- Change password p.42
- Save to a profile p.43
- Play stop the profile schedule p.44
- Profile pushbutton p.45
- Change the input source of an output display p.46
- Power on off individual output displays p.46
- Ir remote control operation p.46
- Power on off all output displays p.47
- This page intentionally left blank p.48
- Overview p.49
- Logging in p.49
- Chapter 4 p.49
- Browser operation p.49
- Menu bar p.50
- Main page p.50
- Profile list p.51
- Adding playing a profile p.51
- Importing exporting a profile p.53
- Profile p.54
- Play window p.54
- Clicking a profile or the play window opens a pop up menu with options p.54
- Profile list options p.54
- Profile scheduling is located below the profile list scheduling allows you to queue and play connection profiles in sequence for a specific amount of time p.56
- Profile scheduling p.56
- After selecting edit you will be presented with the following options p.57
- Digital signage profile p.58
- Connection profiles p.58
- Select source p.59
- Output icon p.59
- Grid view p.60
- Click cancel to undo all unsaved changes output options p.60
- Video wall profile p.61
- Video wall options p.61
- Number of displays output order bezel dimensions p.62
- Null input p.63
- Independent output p.64
- Grouping p.64
- Display preferences p.65
- Video wall example p.66
- Output options p.67
- Dvi video options p.67
- System settings p.69
- General p.70
- Fan status p.70
- Device info p.70
- User account p.72
- Add account p.73
- Permission level p.74
- Port name p.75
- Network p.76
- Edid mode p.78
- Customized mode p.79
- Edid cea description p.80
- Customized edid settings p.81
- Firmware p.84
- Telnet operation p.87
- H call up the command list for help p.87
- Configuration menu p.87
- Ri read what input is connected to nn output p.88
- Pw change password p.88
- Lo load connections from profile p.88
- Ip set ip address p.88
- Im set ip subnet mask p.88
- Gt set gateway address p.88
- Ti set timeout p.89
- Sv save the current connections into a profile p.89
- Ss switch input to specified output p.89
- Sb set serial port baud rate p.89
- Ro read what output is connected to nn input p.89
- Vr software version information p.89
- This page intentionally left blank p.90
- Serial control protocol commands p.91
- Rs232 pin assignment p.91
- Rs 232 commands p.91
- Configuring the serial port p.91
- Chapter 5 p.91
- Verification p.92
- The formula for the switch command is as follows p.93
- The following tables show the possible values for the switch port command p.93
- Switch port command p.93
- Sw o04 enter p.93
- Sw o03 off enter p.93
- Sw i02 o05 enter p.93
- For example to switch input port 02 to output port 05 type p.93
- Command input number output number control enter p.93
- To turn off video output on port 03 type p.93
- To switch output port 04 to the next port type p.93
- The switch port command allows you to switch ports on the vm5404d vm5808d p.93
- Vm5404d vm5808d user manual p.94
- The port number can be skipped and the default value will be used p.94
- The following table lists the available switch port commands p.94
- Note 1 by default input port 01 is tied to output port 01 input port 02 is tied to output port 02 and so on until port 08 i e o01 i01 o02 i02 p.94
- Each command string can be separated with a space p.94
- The following tables show the possible values for the edid command p.95
- The following table lists the available edid commands p.95
- Note each command string can be separated with a space p.95
- For example to use the port1 edid mode type p.95
- Extended display identification data edid is a data that contains a display s basic information and is used to communicate with the video source p.95
- Edid port1 enter p.95
- Edid mode command p.95
- Command control enter p.95
- The formula for the edid command is as follows p.95
- The formula for the mute command is as follows p.97
- The following tables show the possible values for the mute command p.97
- The following table lists the available mute commands p.97
- Skip the output port command to mute or enable the audio of all p.97
- Output ports p.97
- Note 1 each command string can be separated with a space p.97
- Mute o01 on enter p.97
- Mute command p.97
- Mute allows you to enable or disable an output port s audio p.97
- For example to mute the audio coming from output port 1 type p.97
- Command output number control enter p.97
- Scaling o native enter p.98
- Scaling command p.98
- For example to turn scaling off for output port 02 type p.98
- Command output number 1 horizontal resolution number 2 vertical resolution number 3 frequency number 4 control enter p.98
- To set the scaling for output port 04 to 1920x1080 60hz type p.98
- To set the scaling for all output ports to the connected display s native resolution type p.98
- The scaling command allows you to set a resolution for scaling the display connected to an output port p.98
- The formula for the scaling command is as follows p.98
- The following tables show the possible values for the scaling command p.98
- Scaling o04 1080p enter p.98
- Scaling o02 off enter p.98
- Value will be used p.99
- The port number command string can be skipped and the default p.99
- The following table lists the available scaling commands p.99
- Note 1 each command string can be separated with a space p.99
- Note each command string can be separated with a space p.102
- For example to set the fan to low speed type p.102
- Fan speed command p.102
- Fan low enter p.102
- Command control enter p.102
- To set the fan speed use the following command p.102
- The following tables show the possible values for the fan speed command p.102
- The following table lists the available fan speed commands p.102
- The fan speed command allows you to set the vm5808d s internal fan speed p.102
- Note this feature is not supported by the vm5404d p.102
- The formula for the echo command is as follows p.103
- The following tables show the possible values for the echo comman p.103
- The following table lists the available echo commands p.103
- The echo function updates the rs232 controller when operations are made via the front panel pushbuttons web browser or telnet the changes echo back to the rs232 controller to keep the settings in sync with the device p.103
- Note each command string can be separated with a space p.103
- For example to enable the echo feature type p.103
- Echo on enter p.103
- Echo command p.103
- Command control enter p.103
- Blackscreen on enter p.104
- Black screen command p.104
- The formula for the black screen command is as follows p.104
- The following tables show the possible values for the black screen comman p.104
- The following table lists the available black screen commands p.104
- The black screen command turns a display screen black when no source signal is detected this prevents the display from showing the default blue or other color used when no source signal is detected p.104
- Note each command string can be separated with a space p.104
- For example to enable the black screen function type p.104
- Command control enter p.104
- Read command p.105
- The reset command allows you to reset the vm5404d vm5808d to the default factory settings p.106
- The formula for the reset command is as follows p.106
- The following tables show the possible values for the reset command p.106
- The following table lists the available reset commands p.106
- Reset command p.106
- Note each command string can be separated with a space p.106
- Command enter p.106
- Baud 38400 enter p.107
- The formula for the baud rate command is as follows p.107
- The following tables show the possible values for the baud rate command p.107
- The following table lists the available baud rate commands p.107
- The baud rate command allows you to set the rs 232 data rate for the vm5404d vm5808d to use options are 9600 19200 default 38400 and 115200 p.107
- Note each command string can be separated with a space p.107
- For example to set 38400 as the baud rate type p.107
- Command control enter p.107
- Baud rate command p.107
- The formula for the save load profile command is as follows p.108
- The following tables show the possible values for the save load profile commands p.108
- The following table lists the available save load profile commands p.108
- Save load profile command p.108
- Profile f 02 save enter p.108
- Note each command string can be separated with a space p.108
- For example to save the current connection configuration to profile 02 type p.108
- Command profile number control enter p.108
- The save load profile command allows you to save and load connection profiles saving profiles will save the connections currently in use p.108
- To enable or disable the on screen display osd for displays use the following command p.109
- The following tables show the possible values for the osd command p.109
- The following table lists the available osd commands p.109
- Osd o07 on enter p.109
- Osd o off enter p.109
- Osd command p.109
- Note each command string can be separated with a space p.109
- For example to enable the osd for output 07 type p.109
- For example to disable the osd for all outputs type p.109
- Command output number control enter p.109
- Note each command string can be separated with a space p.110
- For example to enable the basic alert function for input port 1 type p.110
- Command input number control enter p.110
- Alert i01 m1 enter p.110
- Alert command p.110
- To trigger a warning when issues arise for a specific input port use the following command p.110
- The following tables show the possible values for the alert command p.110
- The following table lists the available alert commands p.111
- This page intentionally left blank p.112
- Safety instructions p.113
- General p.113
- Appendix p.113
- Rack mounting p.115
- Technical support p.116
- North america p.116
- International p.116
- Specifications p.117
- The direct vendor also reserves the right to revise or update the device or documentation without obligation to notify any individual or entity of such revisions or update for further inquiries please contact your direct vendor p.118
- Limited warranty p.118
Похожие устройства
-
Aten VS0202Руководство пользователя -
Aten VS0202Описание и спецификации продукта -
Aten VS0202Краткое руководство по установке -
Aten VS0204Руководство пользователя
-
Aten VS0204Описание и спецификации продукта
-
Aten VS0204Краткое руководство по установке
-
Aten VM0404HРуководство пользователя -
Aten VM0404HРуководство пользователя (RS-232 Control Tool) -
Aten VM0404HОписание и спецификации продукта -
Aten VM0404HКраткое руководство по установке -
Aten VM0808TРуководство пользователя -
Aten VM0808TРуководство пользователя (RS-232 Control Tool)