![ECS Elitegroup A875M-A [6/74] Chipset](/img/pdf.png)
ECS Elitegroup A875M-A [6/74] Chipset
2
Introducing the Motherboard
Feature
Processor
HyperTransport
TM
Technology is a point-to-point link between two devices, it
enables integrated circuits to exchange information at much higher speeds than
currently available interconnect technologies.
• Accommodates
AMD Phenom
TM
II/Athlon
TM
II/Sempron
TM
processors
(socket AM3)
• Supports HyperTransport
TM
(HT) 3.0 interface speeds
This motherboard uses a socket AM3 that carries the following features:
SB850 (SB)
AMD 870
(NB)
• Supports one x16 PCI Express (PCI-E) link for graph-
ics.
• Supports 16-bit up/down HyperTransport(HT)3.0 in-
terface.
• Fully supports ACPI states S1, S3, S4 and S5
• Supports ATI HyperMemory*.
Note: Includes dedicated and shared memory. The amount
of HyperMemory available is determined by various
factors. For details, please consult your AMD CSS
representative.
• Supports 16-bit up/down HyperTransport (HT) 3.0 in-
terface up to 5.2 GT/s.
The AMD 870 Northbridge (NB) and SB850 Southbridge (SB) chipsets are based
on an innovative and scalable architecture with proven reliability and perfor-
mance.
Chipset
Memory
• Supports DDR3 1600 (OC)/1333/1066/800 SDRAM with Dual-channel
architecture
• Accommodates four unbuffered DIMMs
• Up to 8 GB per DIMM with maximum memory size up to 32 GB
*2
• Compliant with PCI 2.3 specification at 33 MHz
• Supports five Serial ATA devices which speeds up to
6.0 Gb/s
• Supports one External Serial ATA device which speed
up to 3.0Gb/s
• Integrated USB 2.0 Host Controller supporting up to
fourteen USB 2.0 ports
• Supports integrated RAID 0, RAID 1, RAID 5, and RAID
10 functionality across all 5 ports (RAID 10 requires
use of 4 or more SATA ports, and RAID 5 requires use
of 3 or more SATA ports)
Содержание
- Copyright 1
- Disclaimer 1
- Federal communications commission fcc 1
- Preface 1
- Trademark recognition 1
- About the manual 2
- Canadian department of communications 2
- Chapter 1 2
- Chapter 2 2
- Chapter 3 2
- Chapter 4 2
- Chapter 5 2
- Chapter 7 2
- Chatper 6 2
- Configuration 2
- Declaration of conformity 2
- Installing the motherboard 2
- Introducing the motherboard 2
- Preface 2
- Setting up amd sb850 raid 2
- Setting up ejiffy 2
- Trouble shooting 2
- Using bios 2
- Using the motherboard software 2
- Chapter 1 1 3
- Chapter 2 77777 3
- Chapter 3 25 25 25 25 25 3
- Preface i 3
- Tttttable of contents able of contents able of contents able of contents able of contents 3
- Chapter 4 45 45 45 45 45 4
- Chapter 5 49 49 49 49 49 4
- Chapter 6 57 57 57 57 57 4
- Chapter 7 67 67 67 67 67 4
- Chapter 1 introducing the motherboard 5
- Introducing the motherboard 5
- Introduction 5
- Chipset 6
- Feature 6
- Introducing the motherboard 6
- Memory 6
- Processor 6
- Audio optional 7
- Bios firmware 7
- Expansion options 7
- Integrated i o 7
- Introducing the motherboard 7
- Onboard lan 7
- Introducing the motherboard 8
- Specifications 8
- Introducing the motherboard 9
- Motherboard components 9
- Introducing the motherboard 10
- Table of motherboard components 10
- Chapter 2 installing the motherboard 11
- Choosing a computer case 11
- Installing the motherboard 11
- Installing the motherboard in a case 11
- Safety precautions 11
- Checking jumper settings 12
- Installing the motherboard 12
- Setting jumpers 12
- Checking jumper settings 13
- Clr_cmos 13
- Installing the motherboard 13
- Jumper settings 13
- Usbpwr_f1 2 13
- Usbpwr_r1 2 13
- Before installing the processor 14
- Fail safe procedures for over clocking 14
- Installing hardware 14
- Installing the motherboard 14
- Installing the processor 14
- Cpu installation procedure 15
- Ddr3 sdram memory module table 15
- Installing memory modules 15
- Installing the motherboard 15
- Installation procedure 16
- Installing the motherboard 16
- Installing the motherboard 17
- Table a ddr3 memory module qvl qualified vendor list 17
- The following ddr3 memory modules have been tested and qualified for use with this motherboard 17
- Installing the motherboard 18
- Expansion slots 19
- Installing add on cards 19
- Installing the motherboard 19
- Installing the motherboard 20
- Connecting optional devices 21
- Installing the motherboard 21
- Sata1 5 serial ata connectors 21
- Spdifo spdif out header 21
- F_audio front panel audio header 22
- F_usb1 3 front panel usb headers 22
- Installing the motherboard 22
- Please make sure that the usb cable has the same pin assignment as indicated above a different pin assignment may cause damage or system hang up 22
- The motherboard has eight usb ports installed on the rear edge i o port array additionally some computer cases have usb ports at the front of the case if you have this kind of case use auxiliary usb connector to connect the front mounted ports to the motherboard 22
- This header allows the user to install auxiliary front oriented microphone and line out ports for easier access 22
- About sata connectors 23
- Installing a sata hard drive 23
- Installing serial ata hard drives 23
- Installing the motherboard 23
- Connecting i o devices 24
- Installing the motherboard 24
- Connecting 24 pin power cable 25
- Connecting case components 25
- Installing the motherboard 25
- Atx_power atx 24 pin power connector 26
- Connecting 8 4 pin power cable 26
- Cpu_fan cooling fan power connector 26
- Installing the motherboard 26
- Atx12v atx 12v power connector 27
- Installing the motherboard 27
- Power 12v 3 sense sensor 27
- Spk internal speaker 27
- Sys_fan pwr_fan fan power connectors 27
- System ground 2 27
- Connecting pins 1 and 3 to a front panel mounted led provides visual indication that data is being read from or written to the hard drive for the led to function properly an ide drive should be connected to the onboard ide interface the led will also show activity for devices connected to the scsi hard drive activity led connector 28
- Connecting pins 2 and 4 to a single or dual color front panel mounted led provides power on off sleep and message waiting indication 28
- Front panel header 28
- Hard drive activity led 28
- Installing the motherboard 28
- Power sleep message waiting led 28
- Power switch 28
- Reset switch 28
- Supporting the power on off function requires connecting pins 6 and 8 to a momen tary contact switch that is normally open the switch should maintain contact for at least 50 ms to signal the power supply to switch on or off the time requirement is due to internal de bounce circuitry after receiving a power on off signal at least two seconds elapses before the power supply recognizes another on off signal 28
- Supporting the reset function requires connecting pin 5 and 7 to a momentary contact switch that is normally open when the switch is closed the board resets and runs post 28
- The front panel header f_panel provides a standard set of switch and led headers commonly found on atx or micro atx cases refer to the table below for informa tion 28
- This concludes chapter 2 the next chapter covers the bios 28
- About the setup utility 29
- Chapter 3 using bios 29
- Entering the setup utility 29
- The standard configuration 29
- Using bios 29
- Press the delete key to access the bios setup utility 30
- Resetting the default cmos values 30
- Using bios 30
- When powering on for the first time the post screen may show a cmos settings wrong message this standard message will appear following a clear cmos data at factory by the manufacturer you simply need to load default settings to reset the default cmos values note changes to system hardware such as different cpu memories etc may also trigger this message 30
- Bios navigation keys 31
- Using bios 31
- Date time the date and time items show the current date and time on the computer if you are running a windows os these items are automatically updated whenever you make changes to the windows date and time properties utility 32
- For the purpose of better product maintenance the manufacture reserves the right to change the bios items presented in this manual the bios setup screens shown in this chapter are for reference only and may differ from the actual bios please visit the manufacture s website for updated manual 32
- Sata1 5 esata this motherboard supports five sata channels and each channel allows one sata device to be installed 32
- Standard cmos setup 32
- This option displays basic information about your system 32
- Using bios 32
- Using bios 33
- Advanced setup 34
- Amd c q auto 34
- Apic mode enabled 34
- Boot up numlock status on 34
- Core performance boost auto this item only shown when use phenom ii x6 processor the function is to switch the active cpu cores to enhance cpu frequency auto 34
- Enhanced halt c1e disabed this item enables or disables enhanced halt 34
- Quick power on self test enabled enable this item to shorten the power on testing post and have your system start up faster you might like to enable this item after you are confident that your system hardware is operating smoothly 34
- St 2nd3rd boot device hard drive cd dvd removable dev 34
- This item allows you to enable or disable the apci advanced programmable inter rupt controller mode apic provides symmetric multi processing smp for sys tems allowing support for up to 60 processors 34
- This item defines if the keyboard num lock key is active when your system is started 34
- This item helps the system to lower the frequency when cpu idles when the frequency decreases the temperature will drop automatically as well 34
- This page sets up more advanced information about your system handle this page with caution any changes can affect the operation of your computer 34
- Use this item to determine the device order the computer used to look for an operating system to load at start up time the devices showed here will be different depending on the exact devices installed on your motherboard 34
- Using bios 34
- Boot other device yes when enabled the system searches all other possible locations for an operating system if it fails to find one in the devices specified under the first second and third boot devices 35
- Cd dvd drivers press enter 35
- Ecs ejiffy function disabled use this item to enable or disable the ecs ejiffy function ejiffy is ecs unique software program for the quick access to the internet without entering o s please refer to chapter 6 to know more about ejiffy 35
- Hard disk drives press enter 35
- To return to the advanced setup page 35
- To return to the main menu setting page 35
- To view the following screen 35
- Using bios 35
- Advanced chipset setup 36
- Dct unganged mode always 36
- Integrated peripherals 36
- Memory remap feature enabled 36
- Onboard audio function enabled 36
- Onboard sata mode enabled 36
- Sata configuration ide 36
- This item allows users to enable or disable memory hole remapping 36
- This item is used to select the dct mode dram controller mode 36
- This page sets up more advanced information about your system handle this page with caution any changes can affect the operation of your computer 36
- This page sets up some parameters for peripheral devices connected to the system 36
- To return to the main menu setting page 36
- Use this item to enable or disable the onboard audio function 36
- Use this item to enable or disable the onboard sata mode 36
- Use this item to show the serial ata configuration options disabled compatible enhanced 36
- Using bios 36
- Power management setup 37
- Using bios 37
- Pci pnp setup 38
- Using bios 38
- Cpu smart fan control enabled 39
- On motherboards support hardware monitoring this item lets you monitor the parameters for critical voltages temperatures and fan speeds 39
- Pc health status 39
- Smart fan function 39
- This item allows you to enable disable the control of the system fan speed by chang ing the fan voltage 39
- To view the following screen 39
- Using bios 39
- Smart fan mode normal 40
- This item allows you to select the fan mode normal quiet silent or manual for a better operation environment if you choose normal mode the fan speed will be auto adjusted depending on the cpu temperature if you choose quite mode the fan speed will be auto minimized for quiet environment if you choose silent mode the fan speed will be auto restricted to make system more quietly if you choose manual mode the fan speed will be adjust depending on users parameters 40
- To return to the smart fan function page 40
- Using bios 40
- Using bios 41
- Dram frequency auto 42
- M i b iii mb intelligent bios iii 42
- Memory configuration 42
- This item enables users to adjust the dram frequency the default setting is auto andwe recommend users leave the setting unchanged modify it at will may cause thesystem to be unstable 42
- This page enables you to set the clock speed and system bus for your system the clock speed and system bus are determined by the kind of processor you have in stalled in your system 42
- To view the following screen 42
- Using bios 42
- Using bios 43
- Amd phenom tm ii x2 240 processor speed 2000mhz this is display only field and displays the information of the cpu installed in your computer 44
- Cpu vcore 1 00v this item displays the current cpu voltage 44
- Dimm voltage disabled 44
- Ht voltage 1 00v this item displays the current ht voltage 44
- Ht voltage disabled 44
- Load default settings 44
- Load non disk 44
- Nb clk 2000mhz this item shows the frequency of northbridge clock 44
- Nb voltage 1 44v this item displays the current nb voltage 44
- Nb voltage disabled 44
- The default value of the item onboard lan boot rom is disabled accord ingly since the item load non disk is set to disabled 44
- The setup utility does not load default values 44
- This item allows user to adjust dimm voltage when enabled 44
- This item allows user to adjust ht voltage when enabled 44
- This item allows user to adjust nb voltage when enabled 44
- To return to the main menu setting page 44
- Using bios 44
- Vdimm 1 96v this item displays the current dimm voltage 44
- And the default value of the item 1st boot device changed to realtek boot agent lan boot first automatically it is convenient for users to boot from lan or handle when there is no disk 45
- Reboot 45
- Then the default value of the item onboard lan boot rom changed to enabled 45
- To enable it 45
- Using bios 45
- Change supervisor password press enter 46
- Supervisor password 46
- Supervisor password not installed 46
- This item indicates whether a supervisor password has been set if the password has been installed installed displays if not not installed displays 46
- This page helps you install or change a password 46
- To access the sub menu you can use the sub menu to change the supervisor password 46
- To return to the main menu setting page 46
- Using bios 46
- Exit without saving 47
- Save exit setup 47
- User password 47
- Using bios 47
- Updating the bios 48
- Using bios 48
- About the software dvd rom cd rom 49
- Auto installing under windows xp vista 7 49
- Chapter 4 using the motherboard software 49
- Using the motherboard software 49
- Running setup 50
- Using the motherboard software 50
- Drivers and software are automatically installed in sequence follow the onscreen instructions confirm commands and allow the computer to restart a few times to complete the installation 51
- Using the motherboard software 51
- Manual installation 52
- Using the motherboard software 52
- Utility software reference 52
- Amd raid configuration 53
- Chapter 5 setting up amd sb850 raid configuration 53
- Setting up a bootable raid array 53
- Setting up the bios 53
- Amd raid configuration 54
- Configuring the amd raid bios 54
- Entering the raid bios setup 54
- Amd raid configuration 55
- Using the define a new array screen 55
- Amd raid configuration 56
- Assigning the disks 56
- Amd raid configuration 57
- Amd raid configuration 58
- Installing the raid drivers 58
- Amd raid configuration 59
- Chapter 6 setting up ejiffy 61
- Introduction 61
- Setting up ejiffy 61
- Dvd activation 62
- Installation and bios setup 62
- Setting up ejiffy 62
- Setting up ejiffy 63
- Setting up ejiffy 64
- Entering ejiffy 65
- Setting up ejiffy 65
- Feature icons 66
- Setting up ejiffy 66
- Keyboard language setup 67
- Language control panel besides setting english as the default interface ejiffy offers multi language displays and keyboard settings for language switch open the language control panel to select a preferable language setting 67
- Setting up ejiffy 67
- Usage faq 67
- Click to enable all possible language inputs you want to apply and click 68
- Setting up ejiffy 68
- How to change display language 69
- Setting up ejiffy 69
- A system does not power up and the fans are not running 71
- B power is on fans are running but there is no display 71
- Chapter 7 trouble shooting 71
- Start up problems during assembly 71
- Trouble shooting 71
- C the pc suddenly shuts down while booting up 72
- Maintenance and care tips 72
- Start up problems after prolong use 72
- Trouble shooting 72
- Basic troubleshooting flowchart 73
- Yes yes 73
Похожие устройства
- ECS Elitegroup A880GM-A3 Руководство пользователя
- ECS Elitegroup A880GM-AD3 Руководство пользователя
- ECS Elitegroup A880GM-M6 Руководство пользователя
- ECS Elitegroup A880GM-M7 Руководство пользователя
- ECS Elitegroup A880LM-A3 Руководство пользователя
- ECS Elitegroup A880LM-M (V1.0) Руководство пользователя
- ECS Elitegroup A880LM-M (V7.0) Руководство пользователя
- ECS Elitegroup A885GM-A2 Руководство пользователя
- ECS Elitegroup A885GM-M2 Руководство пользователя
- ECS Elitegroup A890GXM-A Руководство пользователя
- ECS Elitegroup H55H-CM Руководство пользователя
- ECS Elitegroup H55H-M Руководство пользователя
- ECS Elitegroup H55H-M2 Руководство пользователя
- ECS Elitegroup H55H-M6 Руководство пользователя
- ECS Elitegroup H55H-I Руководство пользователя
- ECS Elitegroup H57H-M Руководство пользователя
- ECS Elitegroup IC55H-A Руководство пользователя
- ECS Elitegroup P55H-A Руководство пользователя
- ECS Elitegroup P55H-A SLI Руководство пользователя
- ECS Elitegroup P55H-A2 Руководство пользователя