Главная
Skipped breadcrumb items
SP300
Руководство пользователя Страница: 4

Главная
STATUS
SP300
Руководство пользователя Страница: 4

STATUS SP300 — основные правила безопасности при использовании электроинструментов [4/11]

Превью страниц Страница 4 / 11

1. GENERAL SAFETY RULES

• Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewellery, keep your hair,

clothing and gloves away form moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

• Keep mains lead clear from working range of the machine. Always lead the

cable away behind you.

4) Power tool use and care

• Do not force the power tool. use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it

was designed.

• Do not use the power tool if the switch dose not turn it on and off. Any power

tool that cannot be controlled with the switch is dangerous and must

be repaired.

• Disconnect the plug from the power source before making any adjustments,

changing accessories, or storing power tools. Such preventive safety

measures reduce the risk of staring the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

• Maintain power tool. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tools

operation. If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

• Use the power tool, accessories and tool bits etc., in accordance with these

instructions and in the manner intended for the particular type of power tool,

taking into account the working conditions and the work to be performed.

Use of the power tool for operations different form intended could result in a

hazardous situation.

• Before use, check machine, cable, and plug for any damages or material

fatigue.

SPECIFIC SAFETY RULES

EXPLOSION OR FIRE

Solvent and paint fumes can explode or ignite. Severe injury or

property damage can occur.

PREVENTION:

• Provide extensive exhaust and fresh air introduction to keep the air within the

spray area free from accumulation of flammable vapors.

• Avoid all ignition sources such as static electric sparks, open flames, pilot lights,

electrical appliances, and hot objects. Connecting or disconnecting power cords

or working light switches can make sparks.

• D o not smoke in spray area.

• Fire extinguisher must be present and in good working order.

• Use only outdoors in a well-ventilated area. Flammable vapors are often heavier

than air. The turbine contains arcing parts that emit sparks and can ignite vapors.

• Follow the material and solvent manufacturer's warnings and instructions.

• Do not use materials with a flashpoint below 70°F (21°C).

Flashpoint is the temperature that a fluid can produce enough vapors to ignite

(see coating supplier).

• Plastic can cause static sparks. Never hang plastic to enclose the spray area.

Do not use plastic drop cloths when spraying flammable materials.

HAZARD: EXPLOSION HAZARD DUE TO INCOMPATIBLE

MATERIALS.

Will cause property damage or severe injury.

PREVENTION:

• Do not use materials containing bleach or chlorine.

• Do not use halogenated hydrocarbon solvents such as bleach, mildewcide,

methylene chloride and 1,1,1--trichloroethane. They are not compatible with

aluminum.

• Contact your coating supplier about the compatibility of material with aluminum.

HAZARD: HAZARDOUS VAPORS

Paints, solvents, insecticides, and other materials can be

harmful if inhaled or come in contact with the body.

Vapors can cause severe nausea, fainting, or poisoning.

PREVENTION:

• Use a respirator or mask if vapors can be inhaled. Read all instructions supplied

with the mask to be sure it will provide the necessary protection.

2. SPECIFIC SAFETY RULES

STATUS SP300 — основные правила безопасности при использовании электроинструментов [4/11]

Содержание

Похожие устройства