![Makita 5143 R [7/28] Additional safety rules for tool](/img/pdf.png)
Makita 5143 R [7/28] Additional safety rules for tool
7
8. Dress properly
Do not wear loose clothing or jewelry. They can
be caught in moving parts. Rubber gloves and
non-skid footwear are recommended when work-
ing outdoors. Wear protective hair covering to
contain long hair.
9. Use safety glasses and hearing protection
Also use face or dust mask if cutting operation is
dusty.
10. Connect dust extraction equipment
If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used.
11. Don’t abuse cord
Never carry tool by cord or yank it to disconnect it
from receptacle. Keep cord from heat, oil and
sharp edges.
12. Secure work
Use clamps or a vise to hold work. It’s safer than
using your hand and it frees both hands to oper-
ate tool.
13. Don’t overreach
Keep proper footing and balance at all times.
14. Maintain tools with care
Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating
and changing accessories. Inspect tool cords
periodically and, if damaged, have repaired by
authorized service facility. Inspect extension
cords periodically and replace if damaged. Keep
handles dry, clean and free from oil and grease.
15. Disconnect tools
When not in use, before servicing, and when
changing accessories such as blades, bits and
cutters.
16. Remove adjusting keys and wrenches
Form the habit of checking to see that keys and
adjusting wrenches are removed from tool before
turning it on.
17. Avoid unintentional starting
Don’t carry plugged-in tool with finger on switch.
Be sure switch is off when plugging in.
18. Outdoor use extension cords
When tool is used outdoors, use only extension
cords intended for use outdoors and so marked.
19. Stay alert
Watch what you are doing. Use common sense.
Do not operate tool when you are tired.
20. Check damaged parts
Before further use of the tool, a guard or other
part that is damaged should be carefully checked
to determine that it will operate properly and per-
form its intended function. Check for alignment of
moving parts, binding of moving parts, breakage
of parts, mounting, and any other conditions that
may affect its operation. A guard or other part
that is damaged should be properly repaired or
replaced by an authorized service center unless
otherwise indicated elsewhere in this instruction
manual. Have defective switches replaced by
and authorized service center. Do not use tool if
switch does not turn it on and off.
21. Warning
The use of any other accessory or attachment
other than recommended in this operating
instruction or the catalog may present a risk of
personal injury.
22. Have your tool repaired by an expert
This electric appliance is in accordance with the
relevant safety rules. Repairing of electric appli-
ances may be carried out only by experts other-
wise it may cause considerable danger for the
user.
ADDITIONAL SAFETY RULES FOR TOOL
ENB036-2
1. Wear hearing protection.
2. Keep Guards In Place and In Working Order.
Never wedge or tie lower guard open. Check
operation of lower guard before each use.
Don’t use if lower guard does not close
briskly over saw blade.
CAUTION: If saw is dropped, lower guard may
be bent, restricting full return.
3. Do not use blades which are deformed or
cracked.
4. Do not use blades made of high speed steel.
5. Do not stop the blades by lateral pressure on
the saw blade.
6. Keep Blades Clean and Sharp.
Sharp blades minimize stalling and kickback.
7. DANGER: Keep Hands Away From Cutting
Area. Keep hands away from blades. Don’t
reach underneath work while blade is rotat-
ing. Don’t attempt to remove cut material
when blade is moving.
CAUTION: Blades coast after turn off.
8. Support Large Panels. (Fig.1 & 2)
Large panels must be supported as shown in
Fig. 1 to minimize the risk of blade pinching
and kickback.
When cutting operation requires the resting
of the saw on the workpiece, the saw shall be
rested on the larger portion and the smaller
piece cut off.
9. Use Rip Fence.
Always use a fence or straight edge guide
when ripping.
10. Guard Against Kickback. (Fig. 1 & 3)
Kickback occurs when the saw stalls rapidly
and is driven back towards the operator.
Release switch immediately if blade binds or
saw stalls. Keep blades sharp. Support large
panels as shown in Fig. 1. Use fence or
straight edge guide when ripping. Don’t force
tool. Stay alert-exercise control. Don’t
remove saw from work during a cut while the
blade is moving.
NEVER place your hand or fingers behind the
saw. If kickback occurs, the saw could easily
jump backwards over your hand, possibly
causing severe injury.
11. Lower Guard.
Raise lower guard with the retracting handle.
Содержание
- Symbole 5
- Symbols 5
- Символы 5
- English 6
- Explanation of general view 6
- Safety instructions 6
- Specifications 6
- Additional safety rules for tool 7
- Operating instructions 8
- Removing or installing saw blade 8
- Riving knife adjustment fig 11 8
- Save these instructions 8
- Adjusting depth of cut fig 12 9
- Adjusting for bevel cuts fig 13 9
- Guide rule fig 19 9
- Joint assembly fig 20 21 9
- Maintenance 9
- Operation fig 18 9
- Replacement of carbon brushes fig 22 23 9
- Sighting 5603r 5703r fig 14 9
- Switch action fig 17 9
- Top guide 5143r fig 16 9
- Top guide 5903r 5103r fig 15 9
- Ec declaration of conformity 10
- Noise and vibration of model 5103r 10
- Noise and vibration of model 5143r 10
- Noise and vibration of model 5603r 10
- Noise and vibration of model 5703r 10
- Noise and vibration of model 5903r 10
- Deutsch 11
- Sicherheitshinweise 11
- Technische daten 11
- Übersicht 11
- Zusätzliche sicherheitsbestimmungen 12
- Diese hinweise sorgfältig aufbewahren 13
- Bedienungshinweise 14
- Ein und ausschalten abb 17 14
- Einstellung der schnittiefe abb 12 14
- Einstellung des spaltkeils abb 11 14
- Einstellung für schrägschnitte abb 13 14
- Schnittlinie 5603r 5703r abb 14 14
- Schnittskala 5143r abb 16 14
- Schnittskala 5903r 5103r abb 15 14
- Absaugstutzen abb 20 u 21 15
- Auswechseln der kohlebürsten abb 22 u 23 15
- Betrieb abb 18 15
- Parallelanschlag abb 19 15
- Wartung 15
- Dane techniczne 17
- Instrukcje bezpieczeństwa 17
- Polski 17
- Wyjaśnienia dotyczące urządzenia i jego użycia 17
- Dodatkowe zasady bezpieczeństwa 18
- Zachowaj tę instrukcję 19
- Celowanie 5603r 5703r rys 14 20
- Instrukcja obsługi 20
- Prowadnica przednia 5143r rys 16 20
- Prowadnica przednia 5903r 5103r rys 15 20
- Ustawienie cięcia skośnego rys 13 20
- Ustawienie głębokości cięcia rys 12 20
- Ustawienie klina rozszczepiającego rys 11 20
- Wyjmowanie i instalowanie tarczy 20
- Funkcje włącznika rys 17 21
- Konserwacja 21
- Montaż złącza rys 20i 21 21
- Obsługa piły rys 18 21
- Prowadnica krawędziowa rys 19 21
- Wymiana szczoteczek węglowych rys 2 i 23 21
- Ce deklaracja zgodności 22
- Szumy i drgania modelu 5103r 22
- Szumy i drgania modelu 5143r 22
- Szumy i drgania modelu 5603r 22
- Szumy i drgania modelu 5703r 22
- Szumy i drgania modelu 5903r 22
- Для модели 5703r общественные низковольтные распределительные системы с напряжением 220 в и 250 в 23
- Объяснения общего плана 23
- Русский язык 23
- Технические характеристики 23
- Инструкции по мерам безопасности 24
- Дополнительные правила безопасности 25
- Инструкция по эксплуатации 26
- Сохраните эти инструкции 26
- Удаление или установка лезвия пилы 26
- Верхняя направляющая 5143r рис 16 27
- Верхняя направляющая 5903r 5103r рис 15 27
- Визирование 5603r 5703r рис 14 27
- Действие переключения рис 17 27
- Замена угольных щеток рис 22 и 23 27
- Направляющая линейка рис 19 27
- Обслуживание 27
- Регулировка глубины резки рис 12 27
- Регулировка для наклонной резки рис 13 27
- Регулировка раскалывающего ножа рис 11 27
- Сборка соединения рис 20 и21 27
- Управление рис 18 27
- Ес декларация соответствия 28
- Шум и вибрация 28
Похожие устройства
- Hyundai H-1416 Yellow Инструкция по эксплуатации
- HTC DESIRE S Gray Инструкция по эксплуатации
- Siemens ET 73S.. Инструкция по эксплуатации
- Makita 5603 RK Инструкция по эксплуатации
- Stiebel Eltron SH 100 S 73050 Инструкция по эксплуатации
- HTC A9191 Desire HD Инструкция по эксплуатации
- Hyundai H-CMD4016 Black Инструкция по эксплуатации
- Gorenje ICT620BC Инструкция по эксплуатации
- Siemens ET 73P.. Инструкция по эксплуатации
- HTC A3333 Wildfire Инструкция по эксплуатации
- Stiebel Eltron SH 100 A 73122 Инструкция по эксплуатации
- Hyundai H-CMD4001 Инструкция по эксплуатации
- Makita 5604 RK Инструкция по эксплуатации
- Gorenje GMS740E1 Инструкция по эксплуатации
- Siemens ET 73H..2 Инструкция по эксплуатации
- Makita 5705 RK Инструкция по эксплуатации
- Gorenje GT7P2 Инструкция по эксплуатации
- Polaris PS 50VP Инструкция по эксплуатации
- Hyundai H-CMD4028 Инструкция по эксплуатации
- Siemens ET 737.. Инструкция по эксплуатации
Скачать
Случайные обсуждения