Hyundai H-SWE1-80V-UI067 [14/56] Troubleshooting

Hyundai H-SWE1-80V-UI067 [14/56] Troubleshooting
14.
Electrical instant water heater
EN
Water is not heated
Water does not ow from the
hot water outlet valve
Water temperature is too
high
Water leakage
Water ows out from the
appliance casing
1. The temperature control-
ler is damaged.
2. The temperature limiter is
tripped or not activated.
3. The temperature limiter is
damaged.
4. Insucient time for
heating.
5. The heating element is
damaged.
1. Water feeding is shut o.
2. Water pressure is too low.
3. The cold water feed valve
is closed.
The water temperature con-
trol system is damaged.
The seal at the connec-
tion point of the pipes is
disturbed.
1. The internal tank is
corroded
2. The seal at the connection
point of the heating element
is disturbed.
1. Contact a repair specialist in
the Hyundai service center.
2. Activate the thermal switch
observing relevant guidelines.
3. Contact a repair specialist in
the Hyundai service center.
4. Wait until water is heated.
5. Contact a repair specialist in
the Hyundai service center.
1. Wait until water feeding is
restored.
2. Switch on the water heater
again, when normal water pres-
sure is restored.
3. Open the cold water feed
valve.
Contact a repair specialist in the
Hyundai service center.
Replace the connection seal.
1. Contact a repair specialist in
the Hyundai service center.
2. Contact a repair specialist in
the Hyundai service center.
Failure Possible causes Remedy
TROUBLESHOOTING

Содержание

Похожие устройства

Скачать