Condtrol mx2 1-2-085 [12/17] Condtrol mx2 mx2 set condtrol mx2 mx2 set

User Manual

CROSS LINE

LASER

User Manual

CROSS LINE

LASER

CONDTROL MX2 / MX2 SetCONDTROL MX2 / MX2 Set

ACCESSORIES

telescopic pole

target

tripod

OPERATION

Open the battery compartment and insert the batteries according to the

polarity. Don’t confuse the polarities.

Compensating block has two modes:

- blocked compensator – for construction at any angle inclination;

- auto compensation mode – for the plane horizontal and vertical line

construction. To unlock the compensator turn the compensating block

anticlockwise to a position .

Self-leveling control: If the tilt is more than 4° laser lines start to blink,

signalizing that the instrument is out of the automatic self-leveling area.

With the blocked compensator the laser lines are operate at any inclination.

The instrument has four plane construction modes:

- the horizontal and vertical line construction mode with the switched-on

self-leveling mode; green LED is on.

- the vertical line construction mode with the switched-on self-leveling

mode; green LED is on.

- the horizontal line construction mode with the switched-on self-

leveling mode; green LED is on.

- the horizontal and vertical line construction mode with the switched-off

self-leveling mode; red LED is on.

If press and hold the button more than 2 seconds the pulls mode will be

activated at any line position (pulse mode accompanies with blinking red

LED). This mode is usually used for measuring with detector or for reducing

the laser brightness.

If press and hold the button more than 5 second, the laser level turn off from

any line position.

Lock the compensator after using by turning compensating block (6)

clockwise to position .