Vitek VT-2490 W [4/20] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-2490 W [4/20] English

Vitek VT-2490 W [4/20] English
4
ENGLISH
• Do not immerse the power cord and plug into
water or other liquids.
• Make sure that the power cord and the plug
do not touch hot surfaces or sharp edges of
furniture.
• When unplugging the unit, pull the plug but
not the cord.
• Do not touch the power plug with wet hands
as it may lead to electric shock.
• Never use the unit if the power cord or the
power cord plug is damaged, the unit works
improperly or after it was dropped.
• Do not attempt to repair the unit. Do not disas-
semble the unit by yourself, if any malfunction
is detected or after it was dropped, unplug
the unit and apply to any authorized service
center from the contact address list given in
the warranty certificate and on the website
www.vitek.ru.
• Transport the unit in the original package only.
• For environment protection do not discard the
unit with usual household waste after its ser-
vice life expiration; apply to a specialized cen-
ter for further recycling.
• Keep the unit out of reach of children.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
Before the first use
After unit transportation or storage at low
temperature it is necessary to keep it for at
least two hours at room temperature before
switching on.
– Unpack the unit completely and remove any
stickers that can prevent unit operation.
– Remove the package and the accessories
from the process chamber.
– Check the unit for damages; do not use the
unit in case of damages.
Setting
– Set the roaster on a flat and hard surface
that will bear its weight and max. weight of
the products which will be cooked in the
roaster.
– Do not place the unit in places with high mois-
ture and temperature, and near inflammable
objects.
– Choose the place that is out of reach of small
children.
– Place the roaster keeping at least a 20 cm gap
between the sides and rear of the roaster and
the wall and a 30 cm gap above the roaster.
– Do not remove supporting legs from the body
bottom.
– Do not block ventilation openings in the unit
body.
Connecting the roaster to the mains
– Before switching the roaster on, make sure
that the operating voltage and power con-
sumption of the unit correspond to your
mains.
– To avoid fire do not use adapters for connect-
ing the unit to the mains.
– Connect the roaster to a socket with reliable
grounding contact.
– Using of plug with a grounding contact con-
nected to the socket without grounding can
lead to the risk of electric shock.
– Consult a qualified electrician, if roaster
grounding instructions are not completely
clear for you or if you are not sure that the
roaster body is securely grounded.
– If it is necessary to use the extension cord, use
only a 3-wire extension cord with a grounding
contact on the power cord plug and the socket.
– Wire section marking of the roaster power
cord and of the extension cord should match.
– The power cable of the extension cord should
not hang from the edges of the table, where
children can pull it and it should be placed in
such a way that excludes possibility of step-
ping on it.
Before using the unit
– Wash the rack (9), the baking tray (10), the
handles (11, 13) and the skewer (12) with
warm water and neutral detergent and dry
them thoroughly.
– Insert the power plug into the mains socket.
– Switch the unit on in maximal heating mode,
turning the thermostat control knob (2) and
setting it to the position «230».
– Turn the timer knob (4) clockwise and set the
operation time 10-15 minutes, the unit will
start operating. After the operation time is up,
you’ll hear a sound signal.
ACCESSORIES
Rack (9)
Use the rack to roast or defrost products.
To prevent the lower heating element from
getting dirty always set the baking tray (10) under
the rack. Remove the rack from the process
chamber by the handle (11).
IM VT-2490.indd 4 09.01.2017 17:51:56

Содержание

Похожие устройства

Скачать