Vitek VT-1250 G [6/40] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-1250 G [6/40] English

Vitek VT-1250 G [6/40] English
6
ENGLISH
6
– Turn the control knob (10) to set the
required ironing temperature: «•», «••»,
«•••» or «max», depending on the type of
fabric, the pilot lamp (7) will light up.
– When the soleplate (13) reaches the set
temperature, the pilot lamp (7) will go out,
you can start ironing.
Note: While the first switching on, the
heating element of the iron burns, there-
fore occurrence of foreign smell and a
small amount of smoke is possible, it is
normal.
WATER SPRAY
– You can dampen the fabric by pressing the
water spray button (5) several times.
– Make sure that there is enough water in the
water tank (9).
DRY IRONING
– Place the iron on its base (8).
– Insert the power plug into the mains
socket.
– Turn the control knob (10) to set the
required ironing temperature: «•», «••»,
«•••» or «max», depending on the type of
fabric, the pilot lamp (7) will light up.
– Set the continuous steam supply knob (3)
to the “
ø
” position (continuous steam sup-
ply is off).
– When the soleplate reaches the set tem-
perature, the pilot lamp (7) will go out, now
you can start ironing.
– After you finish ironing, set the tempera-
ture control knob (10) to the “min” posi-
tion.
– Pull the power plug out of the mains socket
and let the iron cool down completely.
STEAM IRONING
Steam ironing is possible only if the tempera-
ture control knob (10) is set to the position
«••», «•••» or «max».
The iron is provided with an anti-drip valve that
stops the water supply if the soleplate tem-
perature is too low, it prevents dripping from
the openings of the soleplate (13). During
heating and cooling of the iron soleplate, you
will hear characteristic clicks of the anti-drip
valve opening/closing, which indicates its
normal operation.
– Place the iron on its base (8).
– Insert the power plug into the mains
socket.
– Make sure that there is enough water in the
water tank (9).
– Turn the control knob (10) to set the
required ironing temperature: «••», «•••»
or «max», the pilot lamp (7) will light up.
– When the soleplate (13) reaches the set
temperature, the pilot lamp (7) will go out,
you can start ironing.
– Set the necessary steam intensity with the
continuous steam supply knob (3).
– In the continuous steam supply mode,
steam will be released from the open-
ings of the soleplate (13) only if the iron is
in horizontal position. To stop the steam
supply, put the iron vertically or set the
continuous steam supply knob (3) to the
«
ø
» position.
– After you have finished using the iron,
set the temperature control knob (10) to
the “min” position, and set the continu-
ous steam supply knob (3) to the “
ø
”
position.
– Pull the power plug out of the mains socket
and let the iron cool down completely.
ATTENTION!
If no continuous steam supply occurs during
operation, check whether the temperature
control knob (10) and the steam supply knob
(3) are set properly and whether there is water
in the water tank (9).
BURST OF STEAM
The burst of steam function is useful when
ironing folds and can only be used at high
ironing temperatures (when the temperature
control knob (10) is set to «max»).
When the burst of steam button (4) is
pressed, steam will go out of the soleplate
intensively.
VT-1250.indd 6 05.06.2014 15:02:08

Содержание

Похожие устройства

Скачать
Случайные обсуждения

Ответы 1

Где включается отпариватель?
4 года назад