Home
Главная
Vitek
Утюги
VT-1250 G
Инструкция по эксплуатации Страница: 7

Vitek VT-1250 G [7/40] English

E N G L I S H

Note: To avoid water leakage from the steam

openings, press the burst of steam button (4)

with 4-5 sec. intervals.

VERTICAL STEAM

The vertical steam function can be used only at

high ironing temperatures (when the tempera-

ture control knob (10) is set to “max”).

Wait till the iron soleplate heats up, hold the

iron vertically at the distance of 10-30 cm from

the clothes and press the burst of steam but-

ton (4) with intervals of 4-5 seconds, steam

will be released from the soleplate openings

intensively. To avoid dripping, do not perform

vertical steaming when the soleplate is heating

up (when the pilot lamp (7) is alight).

Important information

• Vertical steam is not recommended for

synthetic fabrics.

• To avoid fabric melting, do not touch it with

the iron’s soleplate while steaming.

• Never steam clothes on a person, as the

steam temperature is very high; use a

clothes hanger or a stand.

• After you finish ironing, switch the unit off,

wait until it cools down completely, then

open the water inlet lid (2), turn over the

iron and drain the remaining water.

STEAM CHAMBER CLEANING

To prolong service life of the iron, we recom-

mend cleaning the steam chamber regularly,

especially in the regions with hard tap water.

– Set the continuous steam supply knob (3)

to the «

» position.

– Fill the water tank (9) with water till the

“max” mark (12).

Note: Do not fill the water tank with scented

liquids, vinegar, starch solution, descaling

reagents, chemicals etc.

– Place the iron on its base (8).

– Insert the power plug into the mains

socket.

– Set the control knob (10) to the maximum

soleplate temperature «max», the pilot

lamp (7) will light up.

– When the iron soleplate (13) reaches the

set temperature, the pilot lamp (7) will go

out. Wait until the iron soleplate is reheat-

ed, then you can start cleaning the steam

chamber.

– Unplug the unit.

– Hold the iron above the sink horizontally,

press and hold the “self clean” button (11).

– Boiling water and steam with scale will be

released from the iron soleplate (13) open-

ings.

– Slightly sway the iron back and forth, until

all the water leaves the water tank (9).

– Place the iron on the base (8) and let it cool

down completely.

– When the soleplate (13) cools down com-

pletely, wipe it with a dry cloth.

– Before you take the iron away for storage,

make sure that there is no water in the water

tank (9) and that the soleplate (13) is dry.

CLEANING AND CARE

– Before cleaning the iron, make sure that it

is unplugged and has cooled down com-

pletely.

– Clean the iron body with a slightly damp

cloth and then wipe it dry.

– Scale on the iron soleplate can be removed

with a cloth soaked in vinegar-water solu-

tion.

– After removing scale, wipe the soleplate

surface with a dry cloth.

– Do not use abrasive substances and sol-

vents to clean the iron soleplate and body.

– Avoid contact of the iron soleplate with

sharp metal objects.

STORAGE

– Before you take the iron away for storage,

clean it and drain all the remaining water

from the water tank (9).

– Set the temperature control knob (10)

to the “min” position, set the continuous

steam supply knob (3) to the “

” position.

– Wind the power cord on the iron base.

– Store the iron vertically in a dry cool place,

out of the reach of children.

VT-1250.indd 7 05.06.2014 15:02:08

Vitek VT-1250 G [7/40] English

Содержание

Похожие устройства