Instrumax element 2d green im0119 Инструкция по эксплуатации онлайн [6/38] 195093

To check plumb

Choose a wall and set laser 5m away from the wall. Mark point

A on the wall, please note the distance from point A to ground

should be 3m. Hang a plumb line from A point to ground and

nd a plumb point B on ground. turn on the laser and make the

vertical laser line meet the point B, along the vertical laser line

on the wall and measure the distance 3m from point B to another

point C. Point C must be on the vertical laser line, it means the

height of C point is 3m.

Measure the distance from point A to point C, if the distance is

over 2 mm, please, contact with seller to calibrate the laser.

Care and cleaning

Please handle measuring instrument with care. Clean with soft

cloth only after any use. If necessary damp cloth with some wa-

ter. If instrument is wet clean and dry it carefully. Pack it up only if

it is perfectly dry. Transport in original container/case only.

Note: During transport On/Off compensator lock (4) must be set

to position “OFF”. Disregard may lead to damage of compensator.

Specic reasons for erroneous measuring results

• Measurements through glass or plastic windows;

• Dirty laser emitting window;

• After instrument has been dropped or hit. Please check

the accuracy.

• Large uctuation of temperature: if instrument will beused

in cold areas after it has been stored in warm areas (or

the other way round) please wait some minutes before

carrying out measurements.

Electromagnetic acceptability (EMC)

• It cannot be completely excluded that this instrument will