DJI SPARK Руководство пользователя онлайн [12/56] 198627

Spark

User Manual

Follow the steps below to use the Vision System:

1. Ensure the aircraft is in P Mode and place the aircraft on a at surface. Note that the Vision System

cannot work properly on surfaces without clear pattern variations.

2. Turn on the aircraft. The aircraft will hover in place after takeoff. The aircraft status indicators will ash

green twice, which indicates the Vision System is working.

front. The 3D Sensing System works best when lighting is adequate and the obstacle is clearly marked or

textured. The aircraft must y at no more than 6.7 mph (10.8 kph) to allow for sufcient braking distance.

3D Sensing and Vision System performance are affected by the type of surface being own over.

The aircraft will switch from P Mode to ATTI Mode automatically if neither GPS or Vision System

are available. Please be vigilant when operating Spark in the following situations:

Flying at high speeds below 0.5 meters.

Flying over monochrome surfaces (e.g., solid black, solid white, solid red, or solid green).

Flying over highly reective surfaces.

Flying over water or transparent surfaces.

Flying over moving surfaces or objects.

Flying in an area where the lighting changes frequently or drastically.

Flying over extremely dark (lux < 10) or bright (lux > 100,000) surfaces.

Flying over surfaces without clear patterns or texture.

Flying over surfaces with identical repeating patterns or textures (e.g., tiling).

Flying over small and ne objects (e.g. tree branches and power lines).

Flying at speeds of over 6.7 mph (10.8 kph) at 2 meters above the ground.

Keep sensors clean at all times. Dirt or other debris may adversely affect their effectiveness.