Zitrek cnp 10-2 091-0015 [22/37] Page 22

Inexperience is hazardous in operating any machine or attachment. Trial and error is not

the way to become familiar with a piece of equipment. This is expensive, cuts equipment

life and can create machine should not be left unattended when operating.

General Safety:

! CAUTION

Protection required. Wear hard hat, shatterproof glassed, steel toed boots and other

protective devices required by job conditions. Avoid jewelry or loose clothing. These

many catch on controls or in moving parts and cause serious injury.

Starting Safety:

! CAUTION

Poisonous fumes. Start and operate only in well ventilated area. Breathing exhaust gases

can result in

sickness or death.

Servicing Safety:

! CAUTION

Flammable liquid. Stop engine and do not smoke or allow work in immediate area when

refueling. Fire or explosion could result from flames or sparks.

Moving parts. Shutdown engine before performing. Service or maintenance. Contact with

moving parts can cause serious injury.

Flight temperature. Allow machine and engine to cool before performing service or

maintenance. Contact with hot components can cause serious bums.

Engine

See engine operations manual

SHUTDOWN

EMERGENCY SHUTDOWN

Move throttle lever to “OFF” position and also turn stop switch to “OFF”.

NORMAL SHUTDOWN

Move throttle lever quickly from “ON” to “OFF” and run engine for 3 to 5 minutes at low

speed . After engine cools, tear stop switch to “OFF” position, close fuel shutoff valve.

HAZARDS AND RISKS

NEVER allow any person to operate the machine without adequate instruction.

ENSURE all operators read, understand and follow the operating instructions.

zitrek