Smeg FAB32RPN1 [21/24] Cleaning and maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Smeg FAB32RPN1 [21/24] Cleaning and maintenance

Smeg FAB32RPN1 [21/24] Cleaning and maintenance
Cleaning and maintenance
47
EN
4.4 Replacing the lamp
1. Remove the bulb cover using a tool (e.g.
a screwdriver).
2. Unscrew and remove the lamp.
3. Replace the lamp with one of the same
type.
4. Refit the cover: line up the teeth of the
cover with the slots in the back of the
lamp housing, then close the cover.
4.5 What to do if...
The appliance does not work:
• Make sure that the appliance is plugged
in and that the main switch is turned on.
The compressor starts to function too often
or functions continuously:
• The room temperature is too high.
• The door is being opened too often or
for too long.
• The door is not closing/sealing properly.
• The freezer is loaded with too many
fresh foods.
• Check that sufficient air can circulate
around the sensor on the right-hand side
of the refrigerator compartment.
• Check that the back of the freezer is
properly ventilated and that the
condenser is not too dirty.
Excessive ice or condensation has built up
inside the refrigerator compartment:
• The door is being opened too often or
for too long.
• Hot foods have been placed inside the
refrigerator compartment.
• The foodstuffs or containers are in
contact with the rear wall.
• The door seal is damaged or dirty.
Clean or replace it.
Water is forming inside the refrigerator
compartment:
• The drainage channel or opening is
blocked.
Use only LED bulbs max 3.3W.

Содержание

Похожие устройства

Скачать