Smeg FAB32RPN1 [23/24] Installation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Smeg FAB32RPN1 [23/24] Installation

Smeg FAB32RPN1 [23/24] Installation
Installation
49
EN
5 Installation
5.1 Electrical connection
General information
• Check the grid characteristics against the
data indicated on the plate. The
identification plate bearing the technical
data, serial number and brand name is
visibly positioned inside the appliance.
Do not remove this plate for any reason.
• Make sure that the plug and socket are
of the same type.
• Avoid using adapters and shunts as
these could cause overheating and a risk
of burns.
• The plug must always be accessible
when the appliance is installed.
• Leave the refrigerator standing vertically
for at least two hours before turning it on
for the first time.
• If it is necessary to replace the power
cable, this must be performed by an
authorised technician from Technical
Support Service.
5.2 Positioning
Power voltage
Danger of electrocution
• The appliance must be connected to
earth in compliance with electrical
system safety standards.
• Do not pull the cable to remove the
plug.
Heavy appliance
Danger of crush injuries
• Position the appliance with the aid of a
second person.
Pressure on the open door
Risk of damages to the appliance
• Never use the open door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
door when open.
• The appliance must not be exposed to
direct sunlight.
• The appliance must not be installed near
heat sources. If this is not possible,
suitable insulation must be used.
• Do not use the appliance outdoors.

Содержание

Похожие устройства

Скачать