Crunch 2110 [31/38] Operation

provided with the detector has a cigarette lighter socket plug

at one end and a small connector at the other.

1. Insert the small connector into the jack on the side of

the detector.

2. Insert the other end into the cigarette lighter socket of

your vehicle.

If the detector does not operate when you turn it on,

remove the adapter from the cigarette lighter socket and

carefully check the socket for debris. Also, check the fuse in

the adapter and your vehicle's fuse box.

Replacing the Fuse

If the detector CRUNCH stops operating, the fuse in the

cigarette lighter plug might be blown. If it has blown, follow

these steps to replace it:

1. To replace the fuse, unscrew the top of the plug.

2. Remove the fuse and check the fuse to see if it has

blown. If it has, replace it.

OPERATION

Power on and Self-test

To turn the detector on, connect power and turn the

On/Off volume control away from you until it clicks.

When powered up, the detector sounds a distinctive tone

for each signal and flashes all LEDs in sequence as a self-

test.

Then all LEDs turn off except the power green LED.