Hyundai H-HI1-30-UI581 [8/52] Disposal

Gas forced heater

ATTENTION!

For ignition of the device never use matches or lighters or other

sources of the open ame

NOTE:

Heater can be supplied with the connected gas hose and gear, in this

case to produce the above steps are not necessary.

3. DISPOSAL

Detailed information on the recycling can be obtained from representative of the local authority.

Service life of the device specied in the warranty card.

4. ASSEMBLY AND INSTALLATION

1. Carefully remove the heater from the package.

2. Make sure that the heating elements and other parts of the appliance have no remaining

crumbles of packing foam plastic or other debris.

3. Connect the heater to a suitable electric socket ~220V, 50Hz. Make sure that the machine is

properly earthed.

4. Connect the gas supply hose to the pressure regulator and connect the regulator to a suitable

LPG cylinder.

5. Open the tap of the cylinder and check the supply hose and ttings for gas leak. For this

operation it is recommended to use an approved leak detector.

ATTENTION!

All gas joints and pipes should be absolutely tight to exclude even

slightest gas leaks. Never use matches, lighters, and other sources

of open ame for leak checks of joints. Use soapy water.

It is prohibited to use the gas-red heater in ats of high-rise

buildings, bedrooms, bathrooms, and cellars.

Upon rst ignition, it is recommended to preliminarily switch the

heater on outdoors, aer which it can be used indoors.

The room, where the gas-red heater is used, should be equipped

with natural ventilation.

Do not use the heater during sleep.

Always use only certied, recommended by the manufacturer,

and properly rated hoses/pressure reducers for connection of the

appliance.

Always use only the gas type indicated by the manufacturer.