Sven GC-W800 [20/22] Game racing wheel

Sven GC-W800 [20/22] Game racing wheel
ENG
20
Game Racing Wheel
Choose Vibration test (Fig. 9) to check and set
vibration feedback:
a) moving cursor in Vibration strength increases or
reduces force of vibration feedback, for example, in
Fig. 9 vibration feedback is 85 %;
b) pressing buttons Left force, Both force or Right force
allows to check vibration feedback (Fig. 9);
c) after setting and checking, press Confirm in the
bottom of the window.
NOTE! Games supporting Force Feedback can have
further setup of feedback in different situations:
crashes, collisions against obstacles or road signs
etc. For further setup it is necessary to make
corresponding adjustments in the setup window
against Stick Volume, Road Effects, Collision, En-
gine etc.
Switching modes. Game racing wheel is equipped with
HOME button f for switching between Digital/Analog
modes, i.e. switching from Digital to Analog mode and
vice-versa. When in Digital mode the wheel is turned and
pedals are pressed, there is static maximum switching
ON/OFF of corresponding axes, i.e. there is only
ON/OFF position. In Analog Mode the signal is sent
dependent on steering angle of the wheel and extent to
which the pedal was pressed, i.e. smoothly.
Operation without pedal unit. Game racing wheel is
equipped with paddle shifters e that substitute
acceleration and brake pedals: the left paddle shifter
functions as a brake pedal, while the right paddle shifter
functions as an acceleration pedal.
For use with PS3
1. Connect the wheel to PS3 console; and connect the
pedal to the wheel.
2. Power on PS3 console.
3. The active channel LED indicator will light up when
connection finished automatically. Then you can set up
or start the game.
4. During PS3 game play, press the HOME button once
to enter the XBM window; Press and hold the HOME
button to enter MENU setup window.
For use with PS4
1. Connect the wheel to PS4 console; and connect the pedal to the wheel.
2. Power on PS4 console.
Fig. 8
Fig. 9