Kuppersberg FA9RC Bronze [12/36] Cancelling the safety function
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kuppersberg FA9RC Bronze [12/36] Cancelling the safety function

Kuppersberg FA9RC Bronze [12/36] Cancelling the safety function
12
TECHNICAL PASSPORT ENGLISH
Electric Hob FA9RC
Cancelling the safety function
The safety function must be
deactivated after the appliance has
been connected, following the steps in
fi gure B. Firstly press the on button (step
1). Then simultaneously press the touch
buttons
and shown in the fi gure
(step 2). Next, press the power decrease
button
(step 3). The touch buttons
that you need to press vary depending
on whether the appliance has four or
fi ve hot plates.
When the control is reactivated, the
appliance will be ready to start cooking.
In the event of a power cut, the lock
function (if activated) will be cancelled.
Figure B:
Power surges
When the touch control system is
subjected to a higher voltage than the
usual ranges allowed in power grids,
the hot plates will disconnect and a
continuous beep will be heard. The
following message fl ashes on the hot
plate displays *:
400
When the nominal voltage is
reestablished, the beeping stops and
the message on the displays disappears.
The hot plates remain disconnected and
the H indicating residual heat remains
on the displays if these were on before
the surge. The appliance is then ready
to be used.
The touch control detects these
power surges whenever the appliance is
connected to the mains, even if it is not
being used at that moment. The alarm
described above might therefore be
activated even when the touch control
is switched off.

Содержание

Похожие устройства

Скачать