![Siemens SN65U090 [18/30] Maintenance and care](/img/pdf.png)
Siemens SN65U090 [18/30] Maintenance and care
![Siemens SN65U090 [18/30] Maintenance and care](/views2/1028977/page18/bg12.png)
en
18
End of programme
The end of the programme O (End) is
displayed on the floor – provided the
optical display is switched on and is
visible.
The end of the programme is also
indicated by an acoustic signal. This
function can be changed as follows:
– Open the door.
–Switch on ON/OFF switch (.
– Hold down programme button # and
press START button )" until •:‹.... is
indicated on the digital display.
–Release both buttons.
The LED for button # flashes and the
digital display 8 displays the factory
setting •:‹….
– Press programme button # until the
factory set value ›:‹ƒ is indicated on
the digital display 8.
To change the setting,
– Press programme button 3. Each
time the button is pressed, the set
value increases by one level; when the
value of ›:‹„ has been reached, the
display jumps back to ›:‹‹ (off).
– Press START button )", the set value
is saved.
– Close the door.
Note
Depending on the setting for “Automatic
switch off when programme ends or
interior light”, the optical display is no
longer or only briefly visible.
Automatic switch off / interior light
Automatic switch off after end of
programme or interior light*
* depending on model
To save energy, the dishwasher can be
automatically switched off 1 min or 120
min after the programme ends.
The setting can be selected from ˜:‹‹ to
˜:‹ƒ.
– Open the door.
–SwitchonON/OFF switch(.
– Hold down programme button #
and press START button )"
until •:‹... is indicated on the digital
display.
– Release both buttons.
The LED for button # flashes
and the digital display 8 displays
the factory setting •:‹….
– Keep pressing programme button #
until the value ˜:‹... is indicated on the
numerical display 8.
To change the setting:
– Press programme button 3.
Each time the button is pressed,
the set value increases by one level;
when the value of ˜:‹ƒ has been
reached, the display jumps back
to ˜:‹‹.
– Press START button )".
The set value is saved.
– Close the door.
˜:‹‹ Appliance does not
switch off automatically.
The interior light 1"
comes on when the door is opened
irrespective of whether the ON/OFF
switch ( is switched on or off.
When the door is closed the light
is off. If the door is open for longer
than 60 min., the light switches off
automatically. The interior light 1"
is lit only when the set value ˜:‹‹ is
selected.
˜:‹‚ Appliance switches off after 1 min.
˜:‹ƒ Appliance switches off after 120
min.
Содержание
- 9000697829 1
- Additional options 16 1
- Customer service 24 1
- Detergent 13 1
- En 9111 640tv 1
- En table of contents 1
- Getting to know your appliance 6 1
- Installation 25 1
- Maintenance and care 20 1
- Overview of programmes 15 1
- Rinse aid 9 1
- Safety instructions 4 1
- Special salt 8 1
- Troubleshooting 21 1
- Utensils 10 1
- Washing the dishes 16 1
- Waste disposal 28 1
- Water softening system 7 1
- 9000697829 2
- Before you switch on the appliance 2
- Delivery 2
- En 9111 640tv 2
- In daily use 2
- Installation 2
- Knives and other utensils with sharp points must be placed horizontally in the cutlery drawer 2
- M warning 2
- Please read the operating and installation instructions carefully they contain important information on how to install use and maintain the appliance 2
- Read the installation chapter to learn how to install and connect the appliance correctly 2
- Retain all documents for subsequent use or for the next owner 2
- Safety instructions 2
- Childproof lock door lock door lock 3
- Children could become locked in the appliance risk of suffocation or find themselves in other dangerous situations 3
- Children in the household 3
- Damage 3
- Depending on model 3
- Disposal 3
- En table of contents 3
- M warning 3
- The description of the childproof lock is at the back in the envelope 3
- Therefore pull out the mains plug sever and dispose of the power cord destroy the door lock so that the door can no longer be closed 3
- Additional options 4
- Appliance interior 4
- Automatic disconnection ƒ 4
- Before you switch on the appliance 4
- Bottom basket 4
- Bottom spray arm 4
- Control panel 4
- Cutlery drawer 4
- Delivery 4
- Depending on model 4
- Detergent dispenser 4
- Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front 4
- Digital display 4
- Dispenser for rinse aid 4
- Dispenser for special salt 4
- Display check water supply 4
- Door opener 4
- End of programme buzzing sound 4
- Filters 4
- Getting to know your appliance 4
- Hot water 4
- In daily use 4
- Individual positions are referred to in the text 4
- Installation 4
- Intensive drying š š 4
- Interior light 4
- Lock for detergent dispenser 4
- Number depending on model 4
- On off switch 4
- Optical display while the programme is running ƒ 4
- Overview of menu 4
- Programme buttons 4
- Rating plate 4
- Rinse aid 4
- Rinse aid refill indicator 4
- Safety instructions 4
- Salt refill indicator 4
- Start button 4
- Tablet collecting tray 4
- The settings can be found in the individual chapters 4
- Timer programming 4
- Timer programming display 4
- Top basket 4
- Top spray arm 4
- Water hardness ˆ 4
- Childproof lock door lock 5
- Children in the household 5
- Damage 5
- Disposal 5
- Salt is not required at the set value 5
- Setting 5
- Tap water above 9 clarke must be softened the water is softened with salt regeneration salt in the water softening system of the dishwasher 5
- The amount of salt dispensed can be set from to ˆ 5
- The setting and therefore the required amount of salt depends on the degree of hardness of your tap water see table 5
- To ensure good washing results the dishwasher requires soft water i e containing low amounts of lime otherwise white limescale will be deposited on the utensils and inner container 5
- Water hardness table 5
- Water softening system 5
- Always refill with special salt immediately before switching on the appliance this ensures that overrun special salt solution is immediately washed out and does not corrode the rinsing tank 6
- Appliance interior 6
- As soon as the salt refill indicator h on the fascia is lit top up the salt 6
- Control panel 6
- Depending on model 6
- Detergents with salt componentusing detergents with salt component 6
- Getting to know your appliance 6
- If combined detergents with a salt component are used salt can usually be omitted up to a water hardness of 21 dh 37 fh 26 clarke 3 mmol l if the water hardness is over 21 dh special salt must be used 6
- If the salt refill indicator h is impaired e g when using combined detergents containing salt component it can be switched off 6
- M warning 6
- Never fill the salt dispenser with detergent you will destroy the water softening system 6
- Overview of menu 6
- Special salt 6
- Switching off water softening systemswitching off salt refill indicator water softening system 6
- Using special salt 6
- As soon as the rinse aid refill indicator p is lit on the fascia there is still a rinse aid reserve of 1 2 rinsing processes refill with rinse aid 7
- Change this setting only if streaks select lower setting or water stains select higher setting are left on the utensils 7
- Combined detergents with rinse aid component may be used up to a water hardness of 21 dh 37 fh 26 clarke 3 mmol l only if the water hardness is over 21 dh rinse aid must be used 7
- If the rinse aid refill indicator p is impaired e g when using combined detergents containing rinse aid component it can be switched off 7
- Rinse aid 7
- Setting 7
- Setting amount of rinse aid 7
- Switching off rinse aid refill indicator 7
- The amount of rinse aid can be set from to please set rinse aid on to obtain very good drying results is already set in factory 7
- The rinse aid is required for stain free utensils and clear glasses use only rinse aid for domestic dishwashers 7
- The rinse aid refill indicator p is now switched off 7
- Water hardness table 7
- Water softening system 7
- Aluminium and silver parts have a tendency to discolour and fade during the wash cycle even some types of glass e g crystal glass objects may turn cloudy after many wash cycles 8
- Causes 8
- Cups and glasses 8
- Glass and utensil damage 8
- Hot utensils are sensitive to shock therefore when the programme ends leave the utensils to cool down in the dishwasher until they can be handled 8
- Loading the dishwasher 8
- Not suitable 8
- Recommendation 8
- Special salt 8
- Switching off salt refill indicator water softening system 8
- To prevent water from dripping off the upper basket onto the utensils in the lower basket it is recommended to empty the appliance from the bottom up 8
- Top basket 12 8
- Unloading the dishwasher 8
- Using detergents with salt component 8
- Using special salt 8
- Utensils 8
- Very small utensils should not be washed in the machine as they may fall out of the baskets 8
- Arrange the cutlery in the cutlery drawer 1 as illustrated separately arranged utensils are easier to remove after washing 9
- Bottom basket 1b 9
- Cutlery drawer 9
- Depending on the model you can fold down the side shelves to provide more room for taller items of cutlery the front rows of prongs can be folded down to provide room for wider handles 9
- Heavily soiled utensils pans should be placed in the bottom basket the more powerful spray jet provides a better dishwashing result 9
- Other examples such as the best way of loading your dishwasher can be found on our homepage as a free download the corresponding internet address can be found on the back page of these instructions for use 9
- Rinse aid 9
- Setting amount of rinse aid 9
- Switching off rinse aid refill indicator 9
- The drawer can be taken out 9
- Adjusting the height of the basket 10
- Appliance height 81 cm 10
- Appliance height 86 cm 10
- Bottom basket 10
- Cups and glasses 10
- Depending on model 10
- Folding spikesfolding spikes 10
- Glass and utensil damage 10
- Light weight plastic accessories e g cups lids etc can be held securely in the small accessories holder 10
- Loading the dishwasher 10
- Not suitable 10
- Setting 1 max ø 10
- Setting 2 max ø 10
- Setting 3 max ø 10
- Small accessories holder small accessories holder 10
- The height of the upper utensils basket 12 can be adjusted in 3 stages to create more space either in the upper or lower basket 10
- The spikes can be folded down to improve arrangement of pans bowls and glasses 10
- Top basket 10
- Unloading the dishwasher 10
- Utensils 10
- Adding detergent 11
- Cutlery drawer 11
- Detergent 11
- If you have further questions we recommend that you contact the detergent manufacturers helpline 11
- M warning 11
- Read and observe the safety information and instructions for use on the packaging for cleaning and rinsing agents 11
- To ensure a good washing result always follow the instructions on the detergent packaging 11
- You can use tablets as well as powder or liquid detergents for dishwashers but never use washing up liquid the dosage can be individually adjusted with powder or a liquid detergent according to the degree of soiling tablets contain an adequately l 11
- Adjusting the height of the basket 12
- Apart from conventional detergents solo a number of products are offered with additional functions these products contain not only the detergent but also rinse aid and salt replacement substances 3in1 and depending on the combination 4in1 5i 12
- As soon as combined detergents are used the rinse programme is adjusted automatically to ensure the best possible rinsing and drying result 12
- Combination detergent 12
- Folding spikes 12
- If the utensils are only lightly soiled slightly less than the indicated amount of detergent is usually adequate 12
- Small accessories holder 12
- Suitable detergents and care products can be purchased online via our website or via customer service see back page 12
- Adding detergent 13
- Auto 35 45 13
- Auto 45 65 13
- Auto 65 75 13
- Clean 45 13
- Clean 50 13
- Cold rinsing intermediate cleaning 13
- Detergent 13
- Dishwasher test appliances com 13
- Eco 50 13
- Express wash speed perfect variospeed 13
- Extra drying 13
- Final rinse 55 13
- Final rinse 65 13
- Half load 13
- Information for test institutes 13
- Intensive zone 13
- Intermediate rinse 13
- Is optimised according to the soiling with the aid of sensors 13
- Mixed utensils and cutlery 13
- Overview of programmes 13
- Part dried common household food remnants 13
- Possible additional options 13
- Pots and pans non sensitive utensils and cutlery 13
- Prerinse 13
- Programme 13
- Programme selection 13
- Programme sequence 13
- Quick 45 13
- Quote the appliance number e nr and the production date fd which you can find on the rating plate 92 on the appliance door 13
- Sensitive utensils cutlery temperature sensitive plastic and glasses 13
- Slightly adhesive fresh food remnants 13
- Test institutes can request the conditions for running comparison tests by sending an e mail to 13
- The max possible number of programmes is illustrated in this overview the corresponding programmes for your appliance can be found on the fascia 13
- Type of soiling 13
- Type of utensils 13
- Very adhesive burned in or dried on food remnants containing starch or protein 13
- You can select a suitable programme according to the type of utensils and degree of soiling 13
- Additional options 14
- Additional options can be set with the buttons h 14
- An increased temperature during the final rinse and an extended drying phase ensure that even plastic parts dry better there is a slight increase in the energy consumption 14
- Aqua sensoraqua sensor 14
- Combination detergent 14
- Depending on model 14
- Express wash speed perfect variospeed ÿ express wash speed perfect variospeed 14
- Extra drying extra drying 14
- Half load half load 14
- Hygiene hygiene 14
- If you have only a few items to wash e g glasses cups plates you can switch to half load this will save water energy and time it is recommended to put a little less detergent in the detergent dispenser than for a full load 14
- Perfect for a mixed load you can wash very soiled pots and pans in the lower basket together with normally soiled utensils in the upper basket the spray pressure in the lower basket is intensified the rinsing temperature is increased slightly 14
- Programme data 14
- Switching on the appliance 14
- The aqua sensor is an optical measuring device light barrier which measures the turbidity of the rinsing water 14
- The aqua sensor is used according to the programme if the aqua sensor is active clean rinsing water can be transferred to the next rinse bath and water consumption can be reduced by 3 6 litres if the turbidity is greater the water is drai 14
- The programme data consumption values can be found in the summary of instructions they refer to normal conditions and the water hardness set value different influencing factors such as e g water temperature or line pressure may result 14
- The temperature is increased during the cleaning process this increases the hygiene status this additional option is ideal for cleaning e g chopping boards and baby bottles 14
- This function can reduce the running time by approx 20 to 50 depending on the selected rinse programme the change in the running time is indicated on the digital display 8 to obtain optimum cleaning results at a reduced running time water and e 14
- Washing the dishes 14
- Ï intensive zone intensive zone 14
- Depending on model 15
- If the base panel is pulled forwards or if the appliance is installed at eye level with flush furniture front the display is not visible 15
- Information for test institutes 15
- Is set at the factory 15
- Optical display while the programme is runningoptical display while the programme is running 15
- Overview of programmes 15
- Possible settings of the optical display 15
- Programme selection 15
- Programme timer programming remaining time end of programme and if required low water level are displayed 15
- Remaining running time display 15
- Same as other programme information is also displayed e g the symbol for half load or glass protection system active w 15
- The display is switched off 15
- The running time is determined during the programme by the water temperature the number of utensils as well as the degree of soiling and may vary depending on the selected programme 15
- Timer programming 15
- When the programme is selected the programme running time is indicated on the digital display 8 when the programme has started the remaining running time is displayed on the floor only for settings and ƒ 15
- While the programme is running an optical display is indicated on the floor under the appliance door 15
- You can delay the start of the programme in 1 hour steps up to 24 hours 15
- Additional options washing the dishes 16
- Appliance does not switch off automatically 16
- Appliance switches off after 1 min 16
- Appliance switches off after 120 min 16
- Aqua sensor 16
- Automatic switch off interior lightautomatic switch off after end of programme or interior light 16
- Depending on model 16
- Depending on the setting for automatic switch off when programme ends or interior light the optical display is no longer or only briefly visible 16
- End of programme 16
- Express wash speed perfect variospeed 16
- Extra drying 16
- Half load 16
- Hygiene 16
- Intensive zone 16
- Programme data 16
- Switching on the appliance 16
- The end of the programme is also indicated by an acoustic signal this function can be changed as follows 16
- The end of the programme o end is displayed on the floor provided the optical display is switched on and is visible 16
- The interior light 1 comes on when the door is opened irrespective of whether the on off switch is switched on or off when the door is closed the light is off if the door is open for longer than 60 min the light switches off automatically the 16
- The setting can be selected from to ƒ 16
- To save energy the dishwasher can be automatically switched off 1 min or 120 min after the programme ends 16
- At the end of the programme please open the door fully and not partially when emptying the dishwasher any escaping water vapour could damage sensitive worktops 17
- Changing the programme 17
- Intensive drying 17
- Interrupting the programme 17
- M warning 17
- Optical display while the programme is running 17
- Remaining running time display 17
- Short time after the end of the programme 17
- Switching off the appliance 17
- Terminating the programmeterminating the programme reset 17
- The final rinse uses a higher temperature which improves the drying result the running time may increase slightly caution if utensils are delicate 17
- The only way a programme can be changed is by cancel programme reset 17
- Timer programming 17
- When the start button has been pressed the programme cannot be changed 17
- A regular inspection and maintenance of your machine will help to prevent faults this saves time and prevents problems 18
- Automatic switch off after end of programme or interior light 18
- Clean the appliance with detergents appliance cleaners which are particularly suitable for use with dishwashers 18
- End of programme 18
- Filters 18
- If you find such deposits 18
- M warning 18
- Maintenance and care 18
- Never use a steam cleaner to clean your dishwasher the manufacturer is not liable for any consequential damage 18
- Never use other chlorinated household detergents health hazard 18
- Overall condition of the machine 18
- Regularly wipe the front of the appliance and fascia with a damp cloth water and a little washing up liquid are adequate do not use sponges with a rough surface or abrasive detergents as these could scratch the surfaces 18
- Special salt and rinse aid 18
- Stainless steel appliances to prevent corrosion avoid using sponge cloths or wash them out thoroughly several times before using for the first time 18
- The filter system consists of a coarse filter a flat fine filter and a microfilter 18
- The filters 1z keep large foreign objects in the rinsing water away from the pump these foreign objects may occasionally block the filters 18
- Changing the programme 19
- Don t forget repairs may be carried out by technicians only if a component has to be replaced ensure that only original spare parts are used improper repairs or use of non original spare parts may cause considerable damage and put the user at c 19
- If on the digital display 8 an error code to always disconnect the appliance from the power supply and then turn off the tap 19
- If the appliance stops during dishwashing or does not start for no obvious reason first run the abort programme function reset 19
- Intensive drying 19
- Interrupting the programme 19
- Limescale and contaminants in the rinsing water may block nozzles and bearings on the spray arms 1 and 1j 19
- M warning 19
- See chapter entitled dishwashing 19
- Spray arms 19
- Switching off the appliance 19
- Terminating the programme reset 19
- The majority of faults which could occur in daily operation can be rectified by the user this ensures that the appliance is quickly available for use again the following overview will help you locating the causes and gives helpful advise to elimina 19
- Troubleshooting 19
- You can rectify certain faults yourself see following fault description for all other faults please contact customer service and state the indicated fault xx 19
- Changing settings 20
- Filters 20
- In this case 20
- Large food remnants or foreign objects which were not captured by the filters may block the waste water pump the rinsing water will then be above the filter 20
- Maintenance and care 20
- On the appliance 20
- Overall condition of the machine 20
- Special salt and rinse aid 20
- Waste water pump 20
- When the appliance is switched on 20
- During the wash cycle 21
- On the utensils 21
- Spray arms 21
- Troubleshooting 21
- Changing settings 22
- Contact the detergent manufacturer in particular if 22
- Customer service 22
- If phosphate free detergents are used with hard tap water white deposits may be deposited more easily on utensils and the container walls 22
- If the advice given does not resolve your problem please contact your customer service contact details can be found on the back cover of this instruction manual or in the enclosed customer service list when calling please quote the appliance num 22
- On the appliance 22
- Rely on the expertise of the manufacturer call us to ensure that the repair will be carried out by fully trained service engineers who are equipped with original spare parts for your appliance 22
- Waste water pump 22
- When the appliance is switched on 22
- 16 a uk 13a 23
- 240 v 50 hz or 60 hz 23
- At least 0 5 mpa 0 bar maximum 1 mpa 10 bar at a higher water pressure connect pressure reducing valve ahead 23
- Cold water hot water max temperature 60 c 23
- Connected load 23
- Delivery 23
- During the wash cycle 23
- If the appliance is not in a cavity and a side panel is accessible the door hinge area must be covered at the side for reasons of safety risk of injury the covers are available as optional accessories from customer service or specialist outlets 23
- Inlet rate 23
- Install the appliance in the correct sequence 23
- Installation 23
- M warning 23
- Max 60 kg 23
- Minimum 10 litres minute 23
- On the utensils 23
- Safety instructions 23
- Technical specifications 23
- The dishwasher must be connected correctly otherwise it will not function properly the specifications for the inlet and outlet as well as the electrical connected loads must correspond with the required criteria as specified in the following paragr 23
- Voltage 23
- Water pressure 23
- Water temperature 23
- Weight 23
- Your dishwasher has been checked thoroughly in the factory to ensure that it is in working order this may cause small water stains these will disappear after the first wash cycle 23
- Connection to hot water is recommended if the hot water can be supplied by energetically favourable means and from a suitable installation e g solar heating system with circulation line 24
- Customer service 24
- Depending on model 24
- Fresh water connection 24
- Installation 24
- It is not recommended to connect the appliance to hot water if the water is supplied from an electric boiler 24
- It is recommended to have a water temperature temperature of the incoming water of at least 40 c and no more than 60 c 24
- The dishwasher can be connected to cold or hot water up to max 60 c 24
- The hot water setting allows you to adjust your appliance optimally to operation with hot water 24
- The required installation dimensions can be found in the installation instructions level the appliance with the aid of the height adjustable feet ensure that the appliance is situated securely on the floor 24
- This will save energy and time 24
- Warm water connectionwarm water connection 24
- Waste water connection 24
- Also observe the sequence of worksteps here 25
- Delivery 25
- Electrical connection 25
- Empty the dishwasher and secure loose parts 25
- If the appliance is in a room where there is a risk of frost e g holiday home empty the appliance completely see transportation 25
- Installation 25
- Protection against frost emptying the appliance protection against frost 25
- Removing the appliance 25
- Safety instructions 25
- Technical specifications 25
- This prevents residual water from running into the machine control and damaging the programme sequence 25
- Transport appliance upright only 25
- Transportation 25
- All plastic parts of the appliance are identified with internationally standardised abbreviations e g ps polystyrene therefore plastic waste can be sorted out when the appliance is being disposed of 26
- Both the packaging of new appliances and the old appliances themselves contain valuable raw materials and recyclable materials 26
- Fresh water connection 26
- Installation 26
- Old appliances 26
- Packaging 26
- Please ask your dealer or inquire at your local authority about current means of disposal 26
- Please dispose of the individual parts separated according to type 26
- Please follow the safety instructions under delivery 26
- Please follow the safety instructions under disposal of your appliance 26
- This appliance is identified according to the european guideline 2002 96 ec on waste electrical and electronic equipment weee the guideline specifies the framework for an eu wide valid return and re use of old appliances 26
- Warm water connection 26
- Waste disposal 26
- Waste water connection 26
- Electrical connection 27
- Protection against frost 27
- Removing the appliance 27
- Transportation 27
- Old appliances 28
- Packaging 28
- Waste disposal 28
- 9000697829 30
Похожие устройства
- Hotpoint-Ariston WMG 720 B Инструкция по эксплуатации
- Энкор Корвет-466 20466 Инструкция по эксплуатации
- Mystery MSF-2407 Инструкция по эксплуатации
- Xoro HSD 8410 Инструкция по эксплуатации
- Akai DV-P6343KDM Инструкция по эксплуатации
- Siemens SN66U094 Инструкция по эксплуатации
- Fubag IN 160 Инструкция по эксплуатации
- Mystery MSF-2406 Инструкция по эксплуатации
- Akai DV-P6342KDM Инструкция по эксплуатации
- Samsung WF6608S7 Инструкция по эксплуатации
- Siemens SN25M201 Инструкция по эксплуатации
- Nikon D3100+18-55 II Инструкция по эксплуатации
- Fubag MASTERLINE 6 STAR-660 Инструкция по эксплуатации
- Akai DV-P701B Инструкция по эксплуатации
- Rolsen D32WSR100TDI2 Инструкция по эксплуатации
- Hotpoint-Ariston WMG 705 B Инструкция по эксплуатации
- Siemens SN65E008 Инструкция по эксплуатации
- Nikon D3100 Kit 18-55 VR Инструкция по эксплуатации
- Akai DV-P703B Инструкция по эксплуатации
- Olympus C-5000 Zoom Инструкция по эксплуатации