![Siemens SN26M296 [17/30] Washing the dishes](/img/pdf.png)
Siemens SN26M296 [17/30] Washing the dishes
![Siemens SN26M296 [17/30] Washing the dishes](/views2/1029011/page17/bg11.png)
en
17
Programme data
The programme data (consumption
values) can be found in the summary of
instructions. They refer to normal
conditions and the water hardness set
value •:‹…. Different influencing factors
such as e.g. water temperature or line
pressure may result in deviations.
Aqua sensor
Aqua sensor *
* depending on model
The Aqua sensor is an optical measuring
device (light barrier) which measures the
turbidity of the rinsing water.
The Aqua sensor is used according to the
programme. If the Aqua sensor is active,
“clean” rinsing water can be transferred to
the next rinse bath and water consumption
can be reduced by 3–6 litres. If the
turbidity is greater, the water is drained
and is replaced with fresh water. In the
automatic programmes the temperature
and running time can also be adjusted to
the degree of soiling.
Switching on the appliance
– Turn on the tap fully.
–Switch on ON/OFF switch(.
The display of the last selected
programme flashes. This programme
remains selected if no other
programme button 0 is pressed. The
expected programme duration flashes
on the digital display )*.
– Press the START button h.
The programme starts running.
Programme TurboSpeed 20 min.:
When the START button h is pressed
the first time, the heating up phase
(approx. 25 min., irrespective of the initial
situation) of the appliance starts. After the
appliance has been opened, loaded and
closed, the rinsing phase (20 min.) starts
when the START button h is pressed
the second time.
Programme sequence indicator
Programme sequence indicator
)"
Remaining running time display
When the programme is selected, the
remaining running time of the programme
is indicated on the digital display )*.
The running time is determined during the
programme by the water temperature, the
number of utensils as well as the degree
of soiling and may vary (depending on the
selected programme).
Programme TurboSpeed 20 min.:
During the heating up phase • and the
remaining running time are indicated
alternately on the digital display; at the
end p flashes, indicating that the
appliance can be opened and loaded.
When the appliance has been restarted,
the remaining running time is indicated
again during the rinsing phase.
Timer programming
Timer programming *
* depending on model
You can delay the start of the programme
in 1-hour steps up to 24 hours.
– Close the door.
–Switch on ON/OFF switch (.
– Press button X + until the digital
display )* jumps to œ:‹‚.
– Press X + or – button until the
displayed time corresponds with your
requirements.
– Press START button h, timer
programming is activated.
– To delete timer programming, press
the X + or – button until )* œ:‹‹ is
indicated on the digital display.
You can change your programme
selection at any time until the
programme starts.
Washing the dishes
-/,
Your dishes are being cleaned.
5/%
Your dishes are being rinsed.
=/<
Your dishes are being dried.
Содержание
- 9000557907 1
- Adding detergent 13 1
- Adjusting the height of the basket 12 1
- Appliance interior 6 1
- Aqua sensor 17 1
- Before you switch on the appliance 4 1
- Button lock 5 1
- Changing settings 22 1
- Changing the programme 19 1
- Children in the household 5 1
- Combination detergent 14 1
- Control panel 6 1
- Cups and glasses 10 1
- Cutlery drawer 11 1
- Damage 5 1
- Delivery 25 1
- Delivery 4 1
- Detergents with salt component 8 1
- Disposal 5 1
- Door lock 5 1
- During the wash cycle 23 1
- Electrical connection 26 1
- En 9111 640mg 1
- En table of contents 1
- End of programme 18 1
- Express wash speed perfect variospeed 16 1
- Extra drying 16 1
- Filters 20 1
- Folding spikes 11 1
- Fresh water connection 25 1
- Glass and utensil damage 10 1
- Half load 16 1
- Hygiene 16 1
- In daily use 4 1
- Information for test institutes 15 1
- Installation 25 1
- Installation 4 1
- Intensive drying 19 1
- Intensive zone 16 1
- Interrupting the programme 18 1
- Loading the dishwasher 10 1
- Not suitable 10 1
- Old appliances 27 1
- On the appliance 22 1
- On the utensils 23 1
- Overall condition of the machine 19 1
- Overview of menu 6 1
- Packaging 27 1
- Pans 11 1
- Programme data 17 1
- Programme selection 15 1
- Programme sequence indicator 17 1
- Protection against frost emptying the appliance 27 1
- Remaining running time display 17 1
- Removing the appliance 26 1
- Safety instructions 24 1
- Setting 7 1
- Setting amount of rinse aid 9 1
- Small accessories holder 12 1
- Special salt and rinse aid 19 1
- Spray arms 20 1
- Switching off automatically after the end of the programme 18 1
- Switching off rinse aid refill indicator 9 1
- Switching off the appliance 18 1
- Switching off water softening system 8 1
- Switching on the appliance 17 1
- Technical specifications 25 1
- Terminating the programme 18 1
- Timer programming 17 1
- Transportation 27 1
- Turbospeed 20 min 15 1
- Unloading the dishwasher 10 1
- Using special salt 8 1
- Warm water connection 26 1
- Waste water connection 25 1
- Waste water pump 21 1
- Water hardness table 7 1
- When the appliance is switched on 22 1
- 9000557907 2
- Before you switch on the appliance 2
- Delivery 2
- En 9111 640mg 2
- In daily use 2
- Installation 2
- Knives and other utensils with sharp points must be placed horizontally in the cutlery drawer 2
- M warning 2
- Please read the operating and installation instructions carefully they contain important information on how to install use and maintain the appliance 2
- Read the installation chapter to learn how to install and connect the appliance correctly 2
- Retain all documents for subsequent use or for the next owner 2
- Safety instructions 2
- Activating the button lock 3
- Childproof lock button lock button lock 3
- Childproof lock door lock door lock 3
- Children could become locked in the appliance risk of suffocation or find themselves in other dangerous situations 3
- Children in the household 3
- Damage 3
- Deactivating the button lock 3
- Depending on model 3
- Disposal 3
- En table of contents 3
- If any button is pressed while the programme is running this is indicated on the digital display it is not possible to end reset the programme 3
- M warning 3
- The description of the childproof lock is at the back in the envelope 3
- Therefore pull out the mains plug sever and dispose of the power cord destroy the door lock so that the door can no longer be closed 3
- When the programme ends on the digital display the button lock is cancelled if there is a power failure the button lock is retained whenever a programme is restarted the button lock must be reactivated 3
- You can secure your appliance from being unintentionally the programme terminated e g improper operation by children 3
- Additional options 4
- Appliance interior 4
- Automatic disconnection ƒ 4
- Before you switch on the appliance 4
- Bottom basket 4
- Bottom spray arm 4
- Control panel 4
- Cutlery drawer 4
- Delivery 4
- Depending on model 4
- Detergent dispenser 4
- Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front 4
- Digital display 4
- Dispenser for rinse aid 4
- Dispenser for special salt 4
- Display check water supply 4
- Door opener 4
- Filters 4
- Getting to know your appliance 4
- Hot water 4
- In daily use 4
- Individual positions are referred to in the text 4
- Installation 4
- Intensive drying š š 4
- Lock for detergent dispenser 4
- Number depending on model 4
- On off switch 4
- Overview of menu 4
- Programme buttons 4
- Programme sequence indicator 4
- Rating plate 4
- Rinse aid 4
- Rinse aid refill indicator 4
- Safety instructions 4
- Salt refill indicator 4
- Start button 4
- Tablet collecting tray 4
- The settings can be found in the individual chapters 4
- Timer programming 4
- Top basket 4
- Top spray arm 4
- Water hardness ˆ 4
- Childproof lock button lock 5
- Childproof lock door lock 5
- Children in the household 5
- Damage 5
- Disposal 5
- Salt is not required at the set value 5
- Setting 5
- Tap water above 9 clarke must be softened the water is softened with salt regeneration salt in the water softening system of the dishwasher 5
- The amount of salt dispensed can be set from to ˆ 5
- The setting and therefore the required amount of salt depends on the degree of hardness of your tap water see table 5
- To ensure good washing results the dishwasher requires soft water i e containing low amounts of lime otherwise white limescale will be deposited on the utensils and inner container 5
- Water hardness table 5
- Water softening system 5
- Always refill with special salt immediately before switching on the appliance this ensures that overrun special salt solution is immediately washed out and does not corrode the rinsing tank 6
- Appliance interior 6
- As soon as the salt refill indicator on the fascia is lit top up the salt 6
- Control panel 6
- Depending on model 6
- Detergents with salt componentusing detergents with salt component 6
- Getting to know your appliance 6
- If combined detergents with a salt component are used salt can usually be omitted up to a water hardness of 21 dh 37 fh 26 clarke 3 mmol l if the water hardness is over 21 dh special salt must be used 6
- If the salt refill indicator is impaired e g when using combined detergents containing salt component it can be switched off 6
- M warning 6
- Never fill the salt dispenser with detergent you will destroy the water softening system 6
- Overview of menu 6
- Special salt 6
- Switching off water softening systemswitching off salt refill indicator water softening system 6
- Using special salt 6
- As soon as the rinse aid refill indicator h is lit on the fascia there is still a rinse aid reserve of 1 2 rinsing processes refill with rinse aid 7
- Change this setting only if streaks select lower setting or water stains select higher setting are left on the utensils 7
- Combined detergents with rinse aid component may be used up to a water hardness of 21 dh 37 fh 26 clarke 3 mmol l only if the water hardness is over 21 dh rinse aid must be used 7
- If the rinse aid refill indicator h is impaired e g when using combined detergents containing rinse aid component it can be switched off 7
- Rinse aid 7
- Setting 7
- Setting amount of rinse aid 7
- Switching off rinse aid refill indicator 7
- The amount of rinse aid can be set from to please set rinse aid on to obtain very good drying results is already set in factory 7
- The rinse aid is required for stain free utensils and clear glasses use only rinse aid for domestic dishwashers 7
- The rinse aid refill indicator h is now switched off 7
- Water hardness table 7
- Water softening system 7
- Aluminium and silver parts have a tendency to discolour and fade during the wash cycle even some types of glass e g crystal glass objects may turn cloudy after many wash cycles 8
- Causes 8
- Cups and glasses 8
- Glass and utensil damage 8
- Hot utensils are sensitive to shock therefore when the programme ends leave the utensils to cool down in the dishwasher until they can be handled 8
- Loading the dishwasher 8
- Not suitable 8
- Recommendation 8
- Special salt 8
- Switching off salt refill indicator water softening system 8
- To prevent water from dripping off the upper basket onto the utensils in the lower basket it is recommended to empty the appliance from the bottom up 8
- Top basket 1 8
- Unloading the dishwasher 8
- Using detergents with salt component 8
- Using special salt 8
- Utensils 8
- Very small utensils should not be washed in the machine as they may fall out of the baskets 8
- Arrange the cutlery in the cutlery drawer 1 as illustrated separately arranged utensils are easier to remove after washing 9
- Bottom basket 1z 9
- Cutlery drawer 9
- Depending on model 9
- Folding spikesfolding spikes 9
- Heavily soiled utensils pans should be placed in the bottom basket the more powerful spray jet provides a better dishwashing result 9
- Other examples such as the best way of loading your dishwasher can be found on our homepage as a free download the corresponding internet address can be found on the back page of these instructions for use 9
- Rinse aid 9
- Setting amount of rinse aid 9
- Switching off rinse aid refill indicator 9
- The drawer can be taken out 9
- The spikes can be folded down to improve arrangement of pans bowls and glasses 9
- Adjusting the height of the basket 10
- Appliance height 81 cm 10
- Appliance height 86 cm 10
- Bottom basket 10
- Cups and glasses 10
- Depending on model 10
- Glass and utensil damage 10
- Light weight plastic accessories e g cups lids etc can be held securely in the small accessories holder 10
- Loading the dishwasher 10
- Not suitable 10
- Setting 1 max ø 10
- Setting 2 max ø 10
- Setting 3 max ø 10
- Small accessories holder small accessories holder 10
- The height of the upper utensils basket 1 can be adjusted in 3 stages to create more space either in the upper or lower basket 10
- Top basket 10
- Unloading the dishwasher 10
- Utensils 10
- Adding detergent 11
- Cutlery drawer 11
- Detergent 11
- Folding spikes 11
- If you have further questions we recommend that you contact the detergent manufacturers helpline 11
- M warning 11
- Read and observe the safety information and instructions for use on the packaging for cleaning and rinsing agents 11
- To ensure a good washing result always follow the instructions on the detergent packaging 11
- You can use tablets as well as powder or liquid detergents for dishwashers but never use washing up liquid the dosage can be individually adjusted with powder or a liquid detergent according to the degree of soiling tablets contain an adequately l 11
- Adjusting the height of the basket 12
- Apart from conventional detergents solo a number of products are offered with additional functions these products contain not only the detergent but also rinse aid and salt replacement substances 3in1 and depending on the combination 4in1 5i 12
- As soon as combined detergents are used the rinse programme is adjusted automatically to ensure the best possible rinsing and drying result 12
- Combination detergent 12
- If the utensils are only lightly soiled slightly less than the indicated amount of detergent is usually adequate 12
- Small accessories holder 12
- Suitable detergents and care products can be purchased online via our website or via customer service see back page 12
- Adding detergent 13
- All types of utensils 13
- Auto 45 65 13
- Clean 40 13
- Clean 50 13
- Clean 50 60 13
- Clean 70 13
- Cold rinsing intermediate cleaning 13
- Depending on model 13
- Detergent 13
- Dishwasher test appliances com 13
- Eco 50 13
- Express wash speed perfect variospeed 13
- Extra drying 13
- Final rinse 55 13
- Final rinse 55 65 13
- Final rinse 65 13
- Gentle 40 13
- Half load 13
- Information for test institutes 13
- Intensive 70 13
- Intensive zone 13
- Intermediate rinse 13
- Is optimised according to the soiling with the aid of sensors 13
- Mixed utensils and cutlery 13
- Overview of programmes 13
- Part dried common household food remnants 13
- Possible additional options 13
- Pots and pans non sensitive utensils and cutlery 13
- Prerinse 13
- Programme 13
- Programme selection 13
- Programme sequence 13
- Quote the appliance number e nr and the production date fd which you can find on the rating plate 9 on the appliance door 13
- Sensitive utensils cutlery temperature sensitive plastic and glasses 13
- Slightly adhesive fresh food remnants 13
- Test institutes can request the conditions for running comparison tests by sending an e mail to 13
- The appliance is heated up once approx 25 min then the appliance is loaded and several quick rinse cycles 20 min each can run in succession 13
- The max possible number of programmes is illustrated in this overview the corresponding programmes and their arrangement can be found on the fascia 13
- Turbospeed 20 min 13
- Turbospeed 20 min turbospeed 20 min especially quick rinsing programme with one off preheating 13
- Type of soiling 13
- Type of utensils 13
- Very adhesive burned in or dried on food remnants containing starch or protein 13
- You can select a suitable programme according to the type of utensils and degree of soiling 13
- Additional options 14
- Additional options can be set with the buttons 14
- An increased temperature during the final rinse and an extended drying phase ensure that even plastic parts dry better there is a slight increase in the energy consumption 14
- Combination detergent 14
- Depending on model 14
- Detergent tablets are not suitable for this programme as the detergent cannot completely dissolve within the short time therefore always use powder detergents and ensure that the salt and rinse aid dispensers are always filled and set to the correc 14
- Express wash speed perfect variospeed ÿ express wash speed perfect variospeed 14
- Extra drying extra drying 14
- Half load half load 14
- Hygiene hygiene 14
- If you have only a few items to wash e g glasses cups plates you can switch to half load this will save water energy and time it is recommended to put a little less detergent in the detergent dispenser than for a full load 14
- Perfect for a mixed load you can wash very soiled pots and pans in the lower basket together with normally soiled utensils in the upper basket the spray pressure in the lower basket is intensified the rinsing temperature is increased slightly 14
- The temperature is increased during the cleaning process this increases the hygiene status this additional option is ideal for cleaning e g chopping boards and baby bottles 14
- This function can reduce the running time by approx 20 to 50 depending on the selected rinse programme the change in the running time is indicated on the digital display to obtain optimum cleaning results at a reduced running time water and 14
- Ï intensive zone intensive zone 14
- Aqua sensoraqua sensor 15
- Depending on model 15
- During the heating up phase and the remaining running time are indicated alternately on the digital display at the end p flashes indicating that the appliance can be opened and loaded when the appliance has been restarted the remaining runnin 15
- Information for test institutes 15
- Overview of programmes 15
- Programme data 15
- Programme selection 15
- Programme sequence indicatorprogramme sequence indicator 15
- Programme turbospeed 20 min 15
- Remaining running time display 15
- Switching on the appliance 15
- The aqua sensor is an optical measuring device light barrier which measures the turbidity of the rinsing water 15
- The aqua sensor is used according to the programme if the aqua sensor is active clean rinsing water can be transferred to the next rinse bath and water consumption can be reduced by 3 6 litres if the turbidity is greater the water is drai 15
- The programme data consumption values can be found in the summary of instructions they refer to normal conditions and the water hardness set value different influencing factors such as e g water temperature or line pressure may result 15
- The running time is determined during the programme by the water temperature the number of utensils as well as the degree of soiling and may vary depending on the selected programme 15
- Timer programmingtimer programming 15
- Turbospeed 20 min especially quick rinsing programme with one off preheating 15
- Washing the dishes 15
- When the programme is selected the remaining running time of the programme is indicated on the digital display 15
- When the start button h is pressed the first time the heating up phase approx 25 min irrespective of the initial situation of the appliance starts after the appliance has been opened loaded and closed the rinsing phase 20 min starts when 15
- You can delay the start of the programme in 1 hour steps up to 24 hours 15
- Your dishes are being cleaned 15
- Your dishes are being dried 15
- Your dishes are being rinsed 15
- Additional options 16
- Appliance does not switch off automatically 16
- As soon as is indicated on the digital display the rinse cycle has ended when the appliance door has been opened p is indicated on the digital display if no further rinse cycle is required switch off the appliance with the on off s 16
- At the end of the programme please open the door fully and not partially when emptying the dishwasher any escaping water vapour could damage sensitive worktops 16
- Automatic disconnection can be adjusted from to ƒ 16
- Depending on model 16
- End of programme 16
- Express wash speed perfect variospeed 16
- Extra drying 16
- Half load 16
- Hygiene 16
- In the case of the turbospeed 20 min programme switch off if no further rinse cycle is to follow 16
- Intensive zone 16
- Interrupting the programme 16
- M warning 16
- Off after 1 min 16
- Off after 120 min 16
- Short time after the end of the programme 16
- Switching off automatically after the end of the programmeswitching off automatically after the end of the programme 16
- Switching off the appliance 16
- Terminating the programmeterminating the programme reset 16
- The following applies to turbospeed 20 min 16
- The programme has ended when the value is indicated on the numerical display 16
- To save energy the dishwasher is switched off 1 minute after the programme ends factory setting 16
- A regular inspection and maintenance of your machine will help to prevent faults this saves time and prevents problems 17
- Aqua sensor 17
- Changing the programme 17
- Clean the appliance with detergents appliance cleaners which are particularly suitable for use with dishwashers 17
- If you find such deposits 17
- Intensive drying 17
- M warning 17
- Maintenance and care 17
- Never use a steam cleaner to clean your dishwasher the manufacturer is not liable for any consequential damage 17
- Never use other chlorinated household detergents health hazard 17
- Overall condition of the machine 17
- Programme data 17
- Programme sequence indicator 17
- Regularly wipe the front of the appliance and fascia with a damp cloth water and a little washing up liquid are adequate do not use sponges with a rough surface or abrasive detergents as these could scratch the surfaces 17
- Remaining running time display 17
- Special salt and rinse aid 17
- Stainless steel appliances to prevent corrosion avoid using sponge cloths or wash them out thoroughly several times before using for the first time 17
- Switching on the appliance 17
- The final rinse uses a higher temperature which improves the drying result the running time may increase slightly caution if utensils are delicate 17
- The only way a programme can be changed is by cancel programme reset 17
- Timer programming 17
- Washing the dishes 17
- When the start button h has been pressed the programme cannot be changed 17
- End of programme 18
- Filters 18
- Interrupting the programme 18
- Limescale and contaminants in the rinsing water may block nozzles and bearings on the spray arms 12 and 1b 18
- Spray arms 18
- Switching off automatically after the end of the programme 18
- Switching off the appliance 18
- Terminating the programme reset 18
- The filter system consists of a coarse filter a flat fine filter and a microfilter 18
- The filters 1r keep large foreign objects in the rinsing water away from the pump these foreign objects may occasionally block the filters 18
- Changing the programme 19
- Don t forget repairs may be carried out by technicians only if a component has to be replaced ensure that only original spare parts are used improper repairs or use of non original spare parts may cause considerable damage and put the user at c 19
- If on the digital display an error code to always disconnect the appliance from the power supply and then turn off the tap 19
- If the appliance stops during dishwashing or does not start for no obvious reason first run the abort programme function reset 19
- In this case 19
- Intensive drying 19
- Large food remnants or foreign objects which were not captured by the filters may block the waste water pump the rinsing water will then be above the filter 19
- M warning 19
- Maintenance and care 19
- Overall condition of the machine 19
- See chapter entitled dishwashing 19
- Special salt and rinse aid 19
- The majority of faults which could occur in daily operation can be rectified by the user this ensures that the appliance is quickly available for use again the following overview will help you locating the causes and gives helpful advise to elimina 19
- Troubleshooting 19
- Waste water pump 19
- You can rectify certain faults yourself see following fault description for all other faults please contact customer service and state the indicated fault xx 19
- Changing settings 20
- Filters 20
- On the appliance 20
- Spray arms 20
- When the appliance is switched on 20
- Contact the detergent manufacturer in particular if 21
- During the wash cycle 21
- If phosphate free detergents are used with hard tap water white deposits may be deposited more easily on utensils and the container walls 21
- On the utensils 21
- Troubleshooting 21
- Changing settings 22
- Customer service 22
- If the advice given does not resolve your problem please contact your customer service contact details can be found on the back cover of this instruction manual or in the enclosed customer service list when calling please quote the appliance num 22
- Install the appliance in the correct sequence 22
- Installation 22
- On the appliance 22
- Rely on the expertise of the manufacturer call us to ensure that the repair will be carried out by fully trained service engineers who are equipped with original spare parts for your appliance 22
- Safety instructions 22
- The dishwasher must be connected correctly otherwise it will not function properly the specifications for the inlet and outlet as well as the electrical connected loads must correspond with the required criteria as specified in the following paragr 22
- When the appliance is switched on 22
- 16 a uk 13a 23
- 240 v 50 hz or 60 hz 23
- At least 0 5 mpa 0 bar maximum 1 mpa 10 bar at a higher water pressure connect pressure reducing valve ahead 23
- Cold water hot water max temperature 60 c 23
- Connected load 23
- Delivery 23
- During the wash cycle 23
- Fresh water connection 23
- If the appliance is not in a cavity and a side panel is accessible the door hinge area must be covered at the side for reasons of safety risk of injury the covers are available as optional accessories from customer service or specialist outlets 23
- Inlet rate 23
- Installation 23
- M warning 23
- Max 60 kg 23
- Minimum 10 litres minute 23
- On the utensils 23
- Technical specifications 23
- The required installation dimensions can be found in the installation instructions level the appliance with the aid of the height adjustable feet ensure that the appliance is situated securely on the floor 23
- Voltage 23
- Waste water connection 23
- Water pressure 23
- Water temperature 23
- Weight 23
- Your dishwasher has been checked thoroughly in the factory to ensure that it is in working order this may cause small water stains these will disappear after the first wash cycle 23
- Also observe the sequence of worksteps here 24
- Connection to hot water is recommended if the hot water can be supplied by energetically favourable means and from a suitable installation e g solar heating system with circulation line 24
- Customer service 24
- Depending on model 24
- Electrical connection 24
- Installation 24
- It is not recommended to connect the appliance to hot water if the water is supplied from an electric boiler 24
- It is recommended to have a water temperature temperature of the incoming water of at least 40 c and no more than 60 c 24
- Removing the appliance 24
- Safety instructions 24
- The dishwasher can be connected to cold or hot water up to max 60 c 24
- The hot water setting allows you to adjust your appliance optimally to operation with hot water 24
- This will save energy and time 24
- Warm water connectionwarm water connection 24
- All plastic parts of the appliance are identified with internationally standardised abbreviations e g ps polystyrene therefore plastic waste can be sorted out when the appliance is being disposed of 25
- Both the packaging of new appliances and the old appliances themselves contain valuable raw materials and recyclable materials 25
- Delivery 25
- Empty the dishwasher and secure loose parts 25
- Fresh water connection 25
- If the appliance is in a room where there is a risk of frost e g holiday home empty the appliance completely see transportation 25
- Installation 25
- Old appliances 25
- Packaging 25
- Please ask your dealer or inquire at your local authority about current means of disposal 25
- Please dispose of the individual parts separated according to type 25
- Please follow the safety instructions under delivery 25
- Please follow the safety instructions under disposal of your appliance 25
- Protection against frost emptying the appliance protection against frost 25
- Technical specifications 25
- This appliance is identified according to the european guideline 2002 96 ec on waste electrical and electronic equipment weee the guideline specifies the framework for an eu wide valid return and re use of old appliances 25
- This prevents residual water from running into the machine control and damaging the programme sequence 25
- Transport appliance upright only 25
- Transportation 25
- Waste disposal 25
- Waste water connection 25
- Electrical connection 26
- Removing the appliance 26
- Warm water connection 26
- Old appliances 27
- Packaging 27
- Protection against frost 27
- Transportation 27
- Waste disposal 27
- 9000557907 30
Похожие устройства
- Hotpoint-Ariston WMSD 7103 B Инструкция по эксплуатации
- Nikon D90 + AF-S DX 18-105G VR Инструкция по эксплуатации
- Akai DV-P6842KDSMC Инструкция по эксплуатации
- Xoro HSD 7190 Инструкция по эксплуатации
- Telwin Nordika 2160 Инструкция по эксплуатации
- Siemens SN26T893 Инструкция по эксплуатации
- Hotpoint-Ariston AQS1D 29 Инструкция по эксплуатации
- Nikon D7000 18-55VR Инструкция по эксплуатации
- Akai DV-P6841KDSM Инструкция по эксплуатации
- Samsung WF6608S4 Инструкция по эксплуатации
- Jet JTS-700L 10000061M Инструкция по эксплуатации
- Siemens SN64M030 Инструкция по эксплуатации
- Nikon D300S Body Инструкция по эксплуатации
- Akai DV-P6838KDSM Инструкция по эксплуатации
- Rolsen D32WSR100TD Инструкция по эксплуатации
- Siemens SR24E802 Инструкция по эксплуатации
- Hotpoint-Ariston AQM9D 497 U Инструкция по эксплуатации
- Nikon D700 Body Инструкция по эксплуатации
- Akai DV-P6835KDM Инструкция по эксплуатации
- Калибр СЭДМ-1500 Инструкция по эксплуатации