![Sony SLV-SE10EG [2/56] Warning](/img/pdf.png)
Sony SLV-SE10EG [2/56] Warning
![Sony SLV-SE10EG [2/56] Warning](/views2/1029255/page2/bg2.png)
Introduction
2
WARNING
To prevent fire or shock hazard, do not expose
the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified a
personnel only.
Mains lead must only be changed at a qualified
service shop.
Precautions
Safety
• This unit operates on 220 – 240 V AC, 50 Hz.
Check that the unit’s operating voltage is
identical with your local power supply.
• If anything falls into the cabinet, unplug the
unit and have it checked by qualified
personnel before operating it any further.
• The unit is not disconnected from the mains
as long as it is connected to the mains, even
if the unit itself has been turned off.
• Unplug the unit from the wall outlet if you
do not intend to use it for an extended
period of time. To disconnect the cord, pull
it out by the plug, never by the cord.
Installing
• Allow adequate air circulation to prevent
internal heat buildup.
• Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation
slots.
• Do not install the unit near heat sources
such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration or shock.
• Do not install the unit in an inclined
position. It is designed to be operated in a
horizontal position only.
• Keep the unit and cassettes away from
equipment with strong magnets, such as
microwave ovens or large loudspeakers.
• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to
a warm location, moisture may condense
inside the VCR and cause damage to the
video head and tape. When you first install
the unit, or when you move it from a cold to
a warm location, wait for about three hours
before operating the unit.
Caution
Television programmes, films, video tapes and
other materials may be copyrighted.
Unauthorized recording of such material may
be contrary to the provisions of the copyright
laws. Also, use of this recorder with cable
television transmission may require
authorization from the cable television
transmitter and/or programme owner.
Compatible colour systems
This VCR is designed to record using the PAL
(B/G or D/K) or MESECAM (B/G or D/K)
colour system and play back using the PAL (B/
G or D/K), MESECAM (B/G or D/K), and
NTSC 4.43 colour systems.
Содержание
- Operating instructions 1
- Slv se10eg slv sx10eg 1
- Video cassette recorder 1
- Caution 2
- Compatible colour systems 2
- Installing 2
- Introduction 2
- Precautions 2
- Safety 2
- Warning 2
- Additional information 3
- Additional operations 3
- Basic operations 3
- Getting started 3
- Table of contents 3
- Step 1 4
- Unpacking 4
- Inserting the batteries 5
- Setting up the remote commander 5
- Step 2 5
- Using the remote commander 5
- Step 2 setting up the remote commander continued 6
- Tv control buttons 6
- Connecting the vcr 7
- If your tv does not have a euro av scart connector 7
- Step 3 7
- Connect aerial out of the vcr and the aerial input of your tv using the supplied aerial cable 8
- Disconnect the aerial cable from your tv and connect it to aerial in on the rear panel of the vcr 8
- If your tv has a euro av scart connector 8
- Step 3 connecting the vcr continued 8
- Step 4 10
- Tuning your tv to the vcr 10
- Setting up the vcr with the auto set up function 12
- Step 5 12
- Setting the clock 14
- Step 6 14
- Selecting a language 16
- Before you start turn on the vcr and the tv set the tv to the video channel 17
- Getting started 17
- If some channels could not be preset using the auto set up function you can preset them manually 17
- Presetting channels 17
- To highlight settings and press ok 17
- To highlight tuner then press ok 17
- Getting started 18
- Presetting channels continued 18
- Press prog to select the programme position 18
- Selected programme position 18
- To highlight channel set then press ok 18
- To highlight normal catv then press ok 18
- To highlight normal then press ok 18
- To preset catv cable television channels select catv 18
- B g tv system 19
- Channel number in the channel set field 19
- Continued 19
- D k tv system 19
- Getting started 19
- Press menu to exit the menu 19
- Receivable channel receivable channel channel number in the channel set field 19
- Repeatedly until the channel you want is displayed 19
- The channels appear in the following order 19
- To allocate another channel to another programme position repeat steps 5 to 8 19
- To select b g or d k so that you get the better sound 19
- Disabling unwanted programme positions 20
- If the picture is not clear 20
- Presetting channels continued 20
- Changing disabling programme positions 21
- Changing programme positions 21
- Changing disabling programme positions continued 22
- Disabling unwanted programme positions 23
- Changing disabling programme positions continued 24
- Getting started 24
- Note the menu disappears automatically if you don t proceed for more than a few minutes be sure to select the programme position you want to disable correctly if you disable a programme position by mistake you need to reset that channel manually 24
- Press clear 24
- Press menu to exit the menu 24
- Repeat steps 3 and 4 for any other programme positions you want to disable 24
- The selected row will be cleared as shown on the right 24
- Tip if you want to return to the previous menu highlight return and press ok 24
- To highlight channel list then press ok 24
- To highlight the row on which you want to disable 24
- Basic operations 25
- Insert a tape 25
- Playing a tape 25
- Press play 25
- The vcr turns on and starts playing automatically if you insert a tape with its safety tab removed 25
- Turn on your tv and set it to the video channel 25
- When the tape reaches the end it will rewind automatically 25
- Additional tasks 26
- Playing a tape continued 26
- To display the counter on the tv screen press display 26
- To play an ntsc recorded tape set ntsc pb at the rear of the vcr according to the colour system of your tv 26
- To set the colour system if the playback picture has no colour or streaks appear during playback set colour system in the options 1 menu to conform to the system that the tape was recorded in see page 45 normally set the option to auto 26
- To use the time counter at the point on the tape that you want to find later press clear the counter in the display window resets to 0 00 00 search for the point afterwards by referring to the counter 26
- Basic operations 27
- Insert a tape with its safety tab in place 28
- Press input select until a programme position number appears in the display window 28
- Press prog to select the programme position you want to record 28
- Recording tv programmes 28
- Turn on your tv and set it to the video channel 28
- Recording tv programmes continued 30
- Basic operations 31
- Before you start check that the vcr clock is set to the correct time and date insert a tape with its safety tab in place make sure the tape is longer than the total recording time turn on your tv and set it to the video channel 31
- Press timer 31
- Recording tv programmes using the timer 31
- The timer menu appears on the tv screen 31
- You can preset up to eight programmes at a time 31
- Recording tv programmes using the timer continued 32
- Basic operations 33
- Reset the counter display tape information on the tv screen check the timer settings watch another tv programme 33
- To use the vcr after setting the timer to use the vcr before a timer recording begins just press i u the indicator turns off and the vcr switches on remember to press i u to reset the vcr after using the vcr 33
- You can also do the following tasks while the vcr is recording 33
- Playing searching at various speeds 34
- To resume normal playback press play 35
- Setting the recording duration time 36
- Before you start turn on your tv and set it to the video channel 37
- Checking changing cancelling timer settings 37
- If you do not need to change or cancel the settings press menu then turn off the vcr to return to recording standby 37
- If you want to change or cancel a setting go on to the next step 37
- Press i u to turn on the vcr 37
- To highlight lists and press ok 37
- To highlight timer list then press ok 37
- Checking changing cancelling timer settings continued 38
- Searching using the smart search function 39
- If you reinsert the tape and record additional programmes be sure to select latest data otherwise all of the data for the tape is deleted 40
- If you want to reset the latest data screen highlight no data and press ok then record a programme 40
- Press ok 40
- Press smart search 40
- Reinsert the last tape that you used to record a programme 40
- Searching using the smart search function continued 40
- The latest data stored in the vcr s memory is displayed 40
- To exit the smart search screen press smart search 40
- To highlight latest data 40
- To recall the latest data screen after you remove the tape 40
- To record in a blank space blank space on the tape will appear as a blank row in the smart search screen select the blank row in step 3 then press ok the vcr rewinds fast forwards the tape to the beginning of the blank space then stops start recording 40
- To stop searching press p stop 40
- You can display the data of the last tape used to record a programme even after you have removed the tape 40
- About the optimum picture control opc function 42
- Adjusting the picture 42
- Adjusting the tracking 42
- Changing menu options 44
- Menu choices initial settings are indicated in bold print 45
- Editing with another vcr 46
- How to connect to record on this vcr 46
- Before you start editing turn on your tv and set it to the video channel press input select to display l1 in the display window 47
- Insert a source tape with its safety tab removed into the other playback vcr search for the point to start playback and set it to playback pause 47
- Insert a tape with its safety tab in place into this recording vcr search for the point to start recording and press p pause 47
- Operation when recording on this vcr 47
- Press r rec on this vcr to set it to recording pause 47
- To start editing press the p pause buttons on both vcrs at the same time 47
- To stop editing press the p stop buttons on both vcrs 47
- If you have any questions or problems not covered below please consult your nearest sony service facility 48
- Symptoms caused by contaminated video heads 48
- Troubleshooting 48
- Troubleshooting continued 50
- Additional information 51
- General 51
- Inputs and outputs 51
- Specifications 51
- Supplied accessories 51
- System 51
- Front panel 52
- Index to parts and controls 52
- Display window 53
- Index to parts and controls continued 54
- Rear panel 54
- Remote commander 55
- E f g h i j k 56
- Sony corporation 56
- T u v w x y z 56
Похожие устройства
- Xoro HSD 700 Инструкция по эксплуатации
- Nikon 18-200mm F3.5-5.6G AF-S DX ED VR II Инструкция по эксплуатации
- Leica D-Lux 5 Инструкция по эксплуатации
- Telwin Technology 188 CE/GE 230V Инструкция по эксплуатации
- Bosch WLG 24260 OE Инструкция по эксплуатации
- Sony SLV-SE10EE Инструкция по эксплуатации
- Samsung WF6602N7 Инструкция по эксплуатации
- Leica V-Lux 2 Инструкция по эксплуатации
- Nikon SB-600 Инструкция по эксплуатации
- Bosch WLM 24441 OE Инструкция по эксплуатации
- Калибр СВА-250-5В Инструкция по эксплуатации
- Rolsen D29SR157TDI2 Инструкция по эксплуатации
- Sony SLV-SE100K Инструкция по эксплуатации
- Leica V-Lux 20 Инструкция по эксплуатации
- Nikon Coolpix L22 Black Инструкция по эксплуатации
- Bosch WLG 24160 OE Инструкция по эксплуатации
- Jet GH-1440W-3 321840T Инструкция по эксплуатации
- Olympus C-40 Zoom Инструкция по эксплуатации
- Sony SLV-SE100A2 Инструкция по эксплуатации
- Leica D-Lux 4 Инструкция по эксплуатации