![Sony SLV-ED60PS [2/48] Compatible colour tv systems](/img/pdf.png)
Sony SLV-ED60PS [2/48] Compatible colour tv systems
![Sony SLV-ED60PS [2/48] Compatible colour tv systems](/views2/1029606/page2/bg2.png)
Introduction
2
WARNING
To prevent fire or shock hazard, do not expose
the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
The mains lead must only be changed at a
qualified service shop.
Precautions
Safety
• This unit operates on 110 – 240 V AC, 50/60
Hz. Check that the unit’s operating voltage
is identical with your local power supply.
• If anything falls into the cabinet, unplug the
unit and have it checked by qualified
personnel before operating it any further.
• The unit is not disconnected from the mains
as long as it is connected to the mains, even
if the unit itself has been turned off.
• Unplug the unit from the mains if you do
not intend to use it for an extended period
of time. To disconnect the lead, pull it out by
the plug, never by the lead.
Installing
• Allow adequate air circulation to prevent
internal heat buildup.
• Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation
slots.
• Do not install the unit near heat sources
such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration or shock.
• Do not install the unit in an inclined
position. It is designed to be operated in a
horizontal position only.
• Keep the unit and cassettes away from
equipment with strong magnets, such as
microwave ovens or large loudspeakers.
• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to
a warm location, moisture may condense
inside the VCR and cause damage to the
video head and tape. When you first install
the unit, or when you move it from a cold to
a warm location, wait for about one hour
before operating the unit.
Caution
Television programmes, films, video tapes and
other materials may be copyrighted.
Unauthorized recording of such material may
be contrary to the provisions of the copyright
laws. Also, use of this recorder with cable
television transmission may require
authorization from the cable television
transmitter and/or programme owner.
Compatible colour/TV systems
• This VCR is designed to record and play
back using the PAL (B/G, D/K and I),
MESECAM (B/G and D/K) and NTSC
colour systems. Recording of video sources
based on other colour systems cannot be
guaranteed.
• NTSC colour signals can only be recorded
through the line input.
Содержание
- Ed60me 1
- Operating instructions 1
- Slv ed60me mj ps sg 1
- Video cassette recorder 1
- Caution 2
- Compatible colour tv systems 2
- Installing 2
- Introduction 2
- Precautions 2
- Safety 2
- Warning 2
- Additional information 3
- Additional operations 3
- Basic operations 3
- Getting started 3
- Table of contents 3
- Checking your model name 4
- Step 1 4
- Step 1 unpacking 4
- Unpacking 4
- Inserting the batteries 5
- Setting up the remote commander 5
- Step 2 5
- Step 2 setting up the remote commander 5
- Using the remote commander 5
- Additional connections 6
- Connecting the aerial 6
- Connecting the vcr 6
- Step 3 6
- Step 3 connecting the vcr 6
- Getting started 7
- To a satellite tuner you can record programmes from other equipment such as a satellite tuner 7
- To a stereo system you can improve sound quality by connecting a stereo system as shown on the right 7
- Step 4 8
- Step 4 tuning your tv to the vcr 8
- Tuning your tv to the vcr 8
- Selecting a language 10
- Step 5 10
- Step 5 selecting a language 10
- Presetting all receivable channels using one touch tuning 11
- Presetting channels 11
- Step 6 11
- Step 6 presetting channels 11
- Before you start turn on the vcr and the tv set the tv to the video channel 12
- Presetting all receivable channels automatically 12
- Step 6 presetting channels continued 12
- To move the cursor to normal catv then select norm 12
- To move the cursor to system then select b g d k or i whichever is applicable in your area if system is set to the wrong position the sound will be distorted or noisy 12
- To move the cursor to tuner preset and press ok 12
- To preset catv channels select catv 12
- All receivable channels are preset in numerical sequence when no more receivable channels can be found presetting stops and the picture from the lowest numbered channel is displayed on the tv screen 13
- Continued 13
- Getting started 13
- To move the cursor to auto preset then press ok 13
- Presetting channels manually 14
- Step 6 presetting channels continued 14
- To move the cursor to channel set 14
- To move the cursor to normal catv then select norm 14
- To move the cursor to tuner preset and press ok 14
- To preset catv channels select catv 14
- B21 b69 15
- Catv tv distribution 15
- Channel coverage 15
- Continued 15
- E2 e12 15
- E21 e69 15
- Getting started 15
- If you know the number of the channel you want press the programme number buttons for example for channel 5 first press 0 and then press 5 15
- Press ok 15
- Press prog to select the programme position 15
- Press repeatedly until the channel you want is displayed pressing goes back to the previous channels 15
- R1 r12 15
- R21 r69 15
- S1 s41 s01 s05 15
- Sa4 sa13 15
- Selected programme position 15
- System b g 15
- System d k 15
- System i 15
- The channels are scanned in the following order 15
- To allocate another channel to another programme position repeat steps 4 and 5 15
- To move the cursor to system then select b g d k or i whichever is applicable in your area 15
- After tuning the tv channels you can disable unused programme positions the disabled positions will be skipped later when you press the prog buttons 16
- Disabling unwanted programme positions 16
- If the picture is not clear 16
- In step 5 on page 15 press programme number button 0 twice to display the number 0 beside channel set 16
- Normally the auto fine tuning aft function automatically tunes in channels clearly if however the picture is not clear you may also use the manual tuning function 16
- Note that the aft auto fine tuning setting switches to off 16
- Press menu then select tuner preset and press ok 16
- Press ok 16
- Press prog to select the programme number for which you cannot obtain a clear picture 16
- Press to get a clearer picture then press ok 16
- Select fine tuning the fine tuning meter appears 16
- Step 6 presetting channels continued 16
- Setting the clock 17
- Step 7 17
- Step 7 setting the clock 17
- Getting started 18
- Note the menu disappears automatically if you do not proceed for more than a few minutes 18
- Press ok to start the clock 18
- Step 7 setting the clock continued 18
- To select the digits 18
- Basic operations 19
- Insert a tape 19
- Playing a tape 19
- The vcr turns on and starts playing automatically if you insert a tape with its safety tab removed 19
- Turn on your tv and set it to the video channel 19
- Additional tasks 20
- Playing a tape continued 20
- Press play 20
- To play an ntsc recorded tape set ntsc pb at the rear of the vcr according to the colour system of your tv 20
- To set the colour system if streaks appear during playback press color system on the vcr to conform to the system that the tape was recorded in normally the colour system is correctly set whenever the tape is inserted 20
- When the tape reaches the end it will rewind automatically 20
- Basic operations 21
- To display the counter on the tv screen press display 21
- To use the time counter at the point on the tape that you want to find later press counter reset the counter in the display window resets to 0 00 00 search for the point afterwards by referring to the counter 21
- Playing a tape continued 22
- Turning on the vcr and tv and starting playback automatically trinitron tv synchro play 22
- Basic operations 23
- Insert a tape with its safety tab in place 23
- Press prog to select the programme position you want to record 23
- Recording tv programmes 23
- Turn on your tv and set it to the video channel 23
- Recording tv programmes continued 24
- Basic operations 25
- Ep provides recording time three times as long as sp however sp produces better picture and sound quality 25
- For tape speed select sp or ep in step 4 25
- To record ntsc colour system programmes ntsc colour signals can be recorded on this vcr from the line 1 in line 2 in and line 3 in sat in jacks only 25
- To select the line input press input select or prog so that l1 l2 or l3 appears in the display window 25
- When playing back the vcr automatically detects the tape speed 25
- Recording tv programmes using the easy timer 26
- Setting the easy timer 26
- Recording tv programmes using the easy timer continued 28
- Setting or changing the easy clock 28
- Basic operations 29
- If you make a mistake re enter the correct digits before pressing easy timer 29
- Indicator appears in the display window 29
- Press the easy timer knob to confirm the clock setting 29
- The vcr enters the timer recording setting mode 29
- To continue the easy timer setting go to step 2 in setting the easy timer on page 26 29
- To quit the easy timer setting mode without changing any settings press the easy timer knob repeatedly until the 29
- To set the clock to 8 20 press 0 8 easy timer 2 0 and easy timer in sequence to set the start or stop time to 8 20 press 0 8 2 0 and easy timer in sequence 29
- To set the timer and clock setting using the remote commander you can also use the remote commander to set the easy timer and easy clock the operations on the vcr and the remote commander correspond as follows 29
- You can also use the programme number buttons to set the clock start and stop times and the programme you want to record just press the programme number buttons to enter the hours and minutes for example 29
- Recording tv programmes using the easy timer continued 30
- Basic operations 31
- Before you start check that the vcr clock is set to the correct time insert a tape with its safety tab in place make sure the tape is longer than the total recording time turn on your tv and set it to the video channel 31
- Press menu and select timer set check then press ok 31
- Set the date start and stop times programme position and tape speed 31
- Setting the timer manually 31
- To set each item to correct a setting press to return to that setting and reset 31
- You can preset up to eight programmes at a time 31
- Setting the timer manually continued 32
- Playing searching at various speeds 33
- To resume normal playback press play 33
- Recording tv programmes using the quick timer 34
- Using the quick timer during stop mode 34
- Before you start turn on your tv and set it to the video channel 35
- Checking changing cancelling timer settings 35
- If you do not need to change the settings press ok then turn off the vcr to return to recording standby 35
- If you want to change a setting go on to the next step 35
- Press menu then select timer set check 35
- Press on standby to turn on the vcr 35
- Checking changing cancelling timer settings continued 36
- How sound is recorded on a video tape 37
- Press audio monitor to select the sound you want 37
- Recording stereo and bilingual programmes 37
- Selecting the sound while playing 37
- The vcr can record stereo and bilingual programmes only through the line input when a stereo or bilingual sound is input through the line input stereo appears on the screen and the display window you cannot select the sound while recording 37
- The vcr records sounds onto two separate tracks hi fi audio is recorded onto the main track along with the picture monaural sound is recorded onto the normal audio track along the edge of the tape 37
- About adaptive picture control apc 38
- Adjusting the picture 38
- Adjusting the tracking 38
- Changing menu options 39
- Menu choices initial settings are indicated in bold print 39
- Press menu then select set up menu 39
- Press ok to return to the original screen 39
- To select the option to change then press to change the setting 39
- Connect line 2 in audio on this vcr to the audio output jacks on the stereo system using the rk c510ks audio cable not supplied 40
- Editing with another vcr or stereo system 40
- How to connect to a stereo system 40
- How to connect to record on this vcr 40
- Before you start editing turn on your tv and set it to the video channel press input select or prog to display l1 l2 or l3 in the display window press sp lp sp ep to select the tape speed sp or lp for the pal system and sp or ep for the ntsc system 41
- Insert a source tape with its safety tab removed into the other playback vcr search for the point to start playback and set it to playback pause 41
- Insert a tape with its safety tab in place into this recording vcr search for the point to start recording and press p pause 41
- Operation when recording on this vcr 41
- Press r rec on this vcr and set it to recording pause 41
- To start editing press the p pause buttons on both vcrs at the same time 41
- To stop editing press the p stop buttons on both vcrs 41
- Symptoms caused by contaminated video heads 42
- Troubleshooting 42
- Others 43
- General 44
- Inputs and outputs 44
- Sapphire tape cleaner 44
- Specifications 44
- Supplied accessories 44
- System 44
- The unit incorporates a sapphire tape cleaner which cleans a video tape when it is loaded this cleaner can prevent the video heads from contamination by removing dust or mold from a tape with the sapphire edge 44
- Troubleshooting continued 44
- Front panel 45
- Index to parts and controls 45
- Display window 46
- Index to parts and controls continued 46
- Rear panel 46
- Remote commander 47
- H i j k 48
- T u v w x y z 48
Похожие устройства
- Levenhuk 3S NG Инструкция по эксплуатации
- Olympus C-220 Zoom Инструкция по эксплуатации
- OKI C3530 MFP Инструкция по эксплуатации
- Samsung WF702W2BBWQ Инструкция по эксплуатации
- Nokia E72-1 Navi Black Инструкция по эксплуатации
- Sony SLV-ED55PS Инструкция по эксплуатации
- OKI C5510 MFP Инструкция по эксплуатации
- Vitek VT-1704 Инструкция по эксплуатации
- Samsung WFE592NMW Инструкция по эксплуатации
- Levenhuk DTX 50 Инструкция по эксплуатации
- Nokia X6 White/Blue Инструкция по эксплуатации
- Sony SLV-ED343SG Инструкция по эксплуатации
- OKI C5540 MFP Инструкция по эксплуатации
- Xoro HSD 311 Инструкция по эксплуатации
- Levenhuk Rainbow 50L NG AzureЛазурь Инструкция по эксплуатации
- Samsung WFM124ZAU Инструкция по эксплуатации
- Nokia X6 Navi 32Gb Red Инструкция по эксплуатации
- Sony SLV-ED343ME Инструкция по эксплуатации
- OKI C5550 MFP Инструкция по эксплуатации
- Samsung WF60F4E2W2W Инструкция по эксплуатации
Скачать
Случайные обсуждения