Vitek VT-1702 [3/6] English

TO ASSEMBLE

1. FIRST PUT THE UNIT UPSIDE DOWN;

2. LET THE "L" SHAPE SCREW SURROUNDING THE DOME OF THE RADIATING

FLANGES OF EACH END BETWEEN THE FIRST AND THE SECOND GROUPS OF THE

RADIATING FLANGES.

3. PUT TWO WHEELS AND SUPPORTING PLATE ASSEMBLIES ON THE UNIT AND

INSERT THE "U" SHAPE SCREW INTO TWO HOLES OF THE SUPPORTING PLATE.

4. INSERT THE BUTTERFLY NUTS AND SCREW THEM TIGHTLY COUNTERCLOCKWISE.

5. STAND THE HEATER.

TO USE

1. Insert the plug into the suitable wall outlet.

1) Never use the unit in place where is not even, make sure there is nothing flammable or

easy deform object within 1 meter (36 inches).

2) Insert the plug after setting the thermostat to "OFF" position and setting the power

selected switches to “OFF" position.

3) Do not cover the unit.

4) The heater is suitable for operation on an A.C. electricity supply having the same volt

age as that show on it's rating label.

2. Press two power switches to the "ON" position then turn thermostat to the "high" posi

tion, at this moment, the unit begins to work, when the temperature rises to which you

are satisfied with, slowly turn the thermostat counter clockwise until the indicating light

of the key for power choice is out, and the room temperature thus can keep constant.

If you want to raise or lower the room temperature, you can make

another regulation: Turn the thermostat clockwise to raise the temperature and coun

terclockwise to lower it., or press only one shift of power switches to "ON" position.

NOTES:

1) The pilot lamp will be on only if the temperature is below the setting value of the ther

mostat.

2) The room must be sealed in good condition, if not, it will not make good result because

of the influx of heat.

3) The outlets of the control chamber must be kept ventilate, if not, undue move of the

thermostat may occur.

3. After use, turn the power switch to the "OFF" position first, then turn the thermostat to

the "OFF" position, and pull out the power supply plug.

310

ENGLISH

1702.qxd 22.04.03 17:05 Page 6