Home
Главная
Joyetech
Батарейный Мод
Cuboid Mini, 2400 mAh, 80 W, стальной
Инструкция по эксплуатации Страница: 3

Joyetech Cuboid Mini, 2400 mAh, 80 W, стальной [3/30] Icuboi

Содержание

Похожие устройства

6 Under VT mode coil temperature can be adjusted from 100 315 C 200 600T with the regulatory button Press right regulatory button to increase the temperature while left regulatory button to lower it A momentary press of the regulatory button will increase decrease the temperature by increments of 5 C 10 F Long pressing the regulatory button will rapidly increase decrease the temperature setting Supplementary VT Mode Functions 1 Lock unlock the atomizer resistance under VT mode Press the fire button three times to enter into the menu Then press the left regulatory button 2 times and the second row where the resistance display will blink Press the right regulatory button to lock or unlock the coil resistance When the lock sign displayed thus the resistance is locked Note 1 Please lock the resistance only when the coil is used at room temperature This will lock the correct base resistance of the atomizer Temperature control will remain accurate as long as the coil is not changed Once the resistance is locked you can remove the tank while the coils are hot or cold and it will function under the same parameter 2 Please unlock the resistance before you change to a different atomizer or temperature control will not work correctly When the resistance is unlocked please ensure any new coil is installed at room temperature when first used to retain temperature accuracy 2 New Coil Same Coil When replacing the atomizer whose resistance is larger than the previous one to some degree resetting of the atomizer base resistance may be required this is the resistance of the atomizer coil when it is used at SICUBOIDMIMI En room temperature When the tank is detached press the power button to initiate a reset After fitting a new atomizer head and reinstall the tank New Coil Same Coil message with the ohm reading will appear on the display Press the right regulatory button to confirm that a new coil has been fitted Should you see this message for any other reason especially when reinstalling the same coil that is still warm from recent use press the left regulatory button so that the base resistance is not reset Always do remember to choose correct operation mode to suit the coil that fitted to ensure that temperature control is accurate NewCoil 0 25Q Right Same Coil 0 20Q Left 3 Wattage adjustment under VT mode Maximum initial wattage can be adjusted under VT mode Press the fire button 3 times to enter the menu Press the left regulatory button and the second row will blink Press the right regulatory button to increase the wattage After that press the fire button to confirm Note 1 VT mode only supports a maximum of 1 5 ohm The device will automatically switch to VW mode when the resistance is larger than 1 5 ohm 2 When Kanthal Wire is applied in VT mode the device will also automatically switch to VW mode after working for 2 seconds Malfunction Indication and Protection Over 10 Second Protection When power button is pressed for more than 10 seconds the output will shut off and the OLED Screen will display Over 10s protection ICUBOIDNINIFG