Merida Big.Seven 40-MD (2016), колеса 27.5", рама 20", 27 скоростей, черный матовый (зеленый) [27/56] System

Stems for threadless systems, the Aheadset

-system

In the case of MERIDA bikes with Aheadset

-headsets

the stem also serves to adjust the bearing preload. If you

change the position of the stem you have to readjust the

bearing play (see the chapter “The headset” in your com-

prehensive MERIDA user manual and in the instructions of

the component manufacturers on the enclosed MERIDA

CD-ROM). The vertical setting range is determined by the

intermediate rings, also referred to as spacers

(e)

. In the

case of ﬂip-ﬂop stem models

(f)

the stem can be mount-

ed the other way round to achieve a different handlebar

height.

Ask your MERIDA dealer to explain you both function

and adjustment of your stem or, still better, let him do that

work.

In the case of turned stems, it is possible that

the cables are too short. In this case, riding can

be unsafe. If in doubt, ask your MERIDA dealer.

When removing spacers the fork steerer tube

must be shortened. This change is irreversible.

The shortening should be carried out by your

MERIDA dealer, but only after you have found your pre-

ferred position.

Keep in mind that readjusting the position of

the stem changes the position of handlebars,

brake levers and shifters. Readjust these com-

ponents, as described in the chapter “Adjusting the tilt of

the handlebars and brake levers“.

Correcting the fore-to-aft position and

horizontal tilt of the saddle

The inclination of your upper body

(g)

, and hence your

riding comfort and pedalling power, is also inﬂuenced

by the distance between the grips of the handlebars

and the saddle. This distance can be altered slightly

by changing the position of the saddle rails in the seat

post clamp. However, this also inﬂuences your pedaling.

Whether the saddle is positioned more to the front or to

the back of the bike will alter how rearward the pedaling

position of your legs is.

You need to have the saddle horizontal in order to ped-

al in a relaxed manner. If it is tilted, you will constantly

have to lean against the handlebars to prevent yourself

from slipping off the saddle.

The bolted connections of the seat post have

to be tightened to the prescribed torque val-

ues

(h)

. Use a torque wrench and never ex-

ceed the maximum torque values! The torque values

are given in the chapter “Recommended torque set-

tings” in these MERIDA short operating instructions as

well as in your comprehensive MERIDA user manual,

directly on the components and/or in the instructions of

the component manufacturers on the enclosed MERIDA

CD-ROM.

Merida Big.Seven 40-MD (2016), колеса 27.5", рама 20", 27 скоростей, черный матовый (зеленый) [27/56] System

Содержание

Похожие устройства