Yashica CS 250 AF Инструкция по эксплуатации онлайн [14/33] 28525

4. Manual Exposure: M In this mode, you can set your desired shutter speed and aperture by hand.

· The shutter speed is set with the Operating Lever, and the aperture is set with this lever while pressing in the F-number Button.

Overexposure/Underexposure Warning If you depress the Shutter Release lightly, you may see an Overexposure (" '') or

Underexposure (" ") turn on in the viewfinder. If the mark " " appears, your subject will be overexposed relative to the correct

exposure measured by the camera; if the mark "

" appears, your subject will be underexposed. To obtain correct exposure

change the aperture or shutter speed so that the mark "

" appears, then shoot.

· If you use an AF Converter (optional accessory), take pictures in the "Av" or "M" mode. Even if the camera is set to other

exposure modes, it will operate in the "Av" mode.

Shutter Release

If the Shutter Release is depressed halfway, the lens is driven

to focus itself (when the Selector Lever is set at "AF") and the

shooting information at that time is shown in the viewfinder

and display panel. It will stay for 8 seconds after the finger is

released, and turn off. Then, depress the Shutter Release all

the way to take your picture.

Electronic Signal Button

When the mark "

" shows in the display panel, you will

hear an audible electronic signal in the following cases:

* When the lens is focused on the subject (in the AF and "

" modes);

* When the entire roll of film has been exposed;

* When the self-timer is operating.

To turn off the audible signal, turn off the mark

" by pressing the Electronic Signal Button.