Tcl L55C1CUS [8/49] Chapter 2 general operation

Chapter 2 General Operation

Switching on

Follow the instructions on this page on how to switch on your TV set

and the remote control before going on to following pages describing

how to use the channel set-up procedure.

1. Insert two AAA batteries in the remote control.

Precautions on using batteries:

- Only use the battery types specied.

- Make sure you use the correct polarity.

- Do not mix new and used batteries.

- Do not use rechargeable batteries.

- Do not expose batteries to excessive heat such as sunshine,

re or the like, throw them in a re, recharge them or try to open

them, as this could cause them to leak or explode.

- Remove the batteries from the remote control if you are not using

it for a long period of time.

2. Connect the power cable FIRST to the television, THEN to a mains

socket. (Note: If the power cable is connected to the television,

please only connect the power cable to the mains socket.)

Your TV set should only be connected to an AC supply. It must not

be connected to a DC supply. If the plug is detached from the ca-

ble, do not, under any circumstances, connect it to a mains socket,

as there is a risk of electric shock.

Note: The gures are for representation only, the location of power

socket of the television may differ depending on the model.

3. Connect an outside aerial to the ANTENNA IN socket at the back

of the TV set.

The aerial socket (75 OHM - VHF / UHF / cable) can be used for

connecting an external aerial or other equipment tted.

Note: If you want to receive the signal from your cable or cable

box, please connect a coaxial cable to the CABLE IN socket at the

back of the TV set.

4. When powered on, the TV will be turned on directly or be in

standby mode.

If the power indicator lights up, the TV set is in standby mode.

Press the

button on the remote control or on the TV set to turn

on the TV.

Switching off

• To put the TV set into standby mode, press the button on the

remote control. The TV set remains powered up, but with low

energy consumption.

• To switch off the TV set, unplug the mains socket from the mains

outlet.