Vitek VT-3534 [5/20] Setting up

SETTING UP

• Set up the transmitter(s) before set-

ting up the receiver

1. Remove battery cover and insert batteries

to start setup 2 AA size batteries (included)

Insert batteries into compartment observing

proper polarity

2. HOUSE CODE will flash for 8 seconds

3. Select HOUSE CODE (1-15) by pressing

C/F and pressing SET to CHANNEL setting

If you have multiple transmitters for a single

receiver, set each transmitter

to the same

House code

4. CHANNEL will flash for 8 seconds

5. Select CHANNEL (1-4) by pressing C/F

If you have multiple transmitters for a single receiver, set

each transmitter to a different

Channel code

6. Humidity & Temperature will alternatively display on LCD

screen

7. Select °C or °F of Temperature by pressing C/F

• Use a different house code if your weather station detects other signals

from neighboring sources

• Factory default: house code = 01 and channel = 01

1. Remove battery cover

2. 2 AA size batteries (included)

3. Insert batteries into compartment,

observing proper polarity; replace cover

REPLACING BATTERIES: symbol on

receiver will appear when batteries need to be changed.

Transmitter: Lo bat will be displayed

ENGLISH

SETTING UP TRANSMITTER(S)

SETTING UP RECEIVER

3534.qxd 22.09.2004 15:22 Page 4