Liebherr GKPv 6570 [6/9] Setting the temperature
![Liebherr GKPv 6570 [6/9] Setting the temperature](/views2/1319344/page6/bg6.png)
14
Operating and control elements
1ON/OFF button (toswitchtheapplianceonando)
2Temperature setting buttons
3Set button (Enter)
4Audible warningon/obutton
5Humidity function
6Display
Symbols in the display
Compressor is running
LEDashing-refrigerationunitswitchesonafteradelay.The
compressor will start automatically after the pressure in the
refrigerant circuit has equalised.
Fan is running
Appliance is defrosting
Alarm function
If appears in the display, the appliance has a fault. Consult
your nearest customer service point.
Switching the appliance on and o
Connect the appliance to the mains - the display reads OFF.
To switch the appliance on
Press the ON/OFF button for approx. 5 seconds so that
the temperature display lights up.
To switch the appliance o
Keep the ON/OFF button pressed for approx. 3 seconds - the
display reads OFF.
Setting the temperature
•Pressbutton 1 sec. The temperature display flashes.
•Toincreasethetemperature(warmer):pressbutton
.
•Toreducethetemperature(colder):pressbutton
.
•Pressbutton
again.
The desired temperature setting is saved.
Audible warning signal
- This sounds when the door has been left open for
longer than 240 seconds. The audible warning device
is switched off by pressing the Alarm button.
- It sounds when the interior gets too warm or too cold. The tem-
perature display will also flash. The audible warning signal is
switched off by pressing the Alarm button.
LED
on constantly. An error code (E0, E1, LO, HI, EE) will
appear in the display at the same time. Consult your nearest
customer service point.
If too large quantities of warm food are put in the appliance at the
same time or the door is left open for a long time, the temperature
willincreaseandLED
will light up (the display will read HI).
This does not mean that the appliance is faulty.
Checkthedisplayagainafterafewhours.Ifitisstillindicatingan
alarm, contact your customer service department.
Humidity function
Certainfoodsmustbestoredinahumidatmosphere(e.g.baked
goods).
To prevent such foods from drying out, the humidity
function must be activated.
• Pressbutton
for 2 seconds.
Use buttons
and to select the desired humidity setting
(high, medium, low).
= high
= medium
= low
•Pressbutton
.
Содержание
- 681 00 1
- Operating instructions 1
- Content 2
- Description of the appliance 2
- Disposal notes 2
- Gkpv 14 gkpv 65 2
- Stackingmark 2
- Appliance dimensions 4
- Climate rating 4
- Do not operate the appliance outside the specified room temperature range 4
- Do not set the adjustable foot to a height greater than 170 mm the bottom section of the adjustable foot can become loose and the appliance may then tip over 4
- Donotcoverventilationopen ings or grille 4
- Electrical connection 4
- Setting up 4
- The height of the foot can be adjusted from 120 mm to 170 mm 4
- Thesocketmustnotbesituatedbehindtheappli ance and must be easily accessible 4
- This can lead to serious or even fatal injuries 4
- Warning 4
- Bkpv equipment 5
- Equipment 5
- Gkpv 14 equipment 5
- If the cover is removed do not look directly at the light through optical lenses from close distance 5
- Important 5
- Interior light in appliances with glass door 5
- Intermediate shelves 5
- The light cover may only be removed by customer service staff 5
- The light intensity of the led light corresponds to laser class 1 1m 5
- This can damage your eyes 5
- Audible warning signal 6
- Humidity function 6
- Operating and control elements 6
- Setting the temperature 6
- Switching the appliance on and off 6
- Symbols in the display 6
- To switch the appliance off 6
- To switch the appliance on 6
- Cleaning 7
- Cleaning the dust filter 7
- Defrosting 7
- Do not use steam cleaners because of the risk of injury and damage 7
- Malfunctions 7
- Remove the plug 7
- Safety lock 7
- Shutting your appliance down 7
- Changing over door hinges gkpv 65 bkpv 84 8
- If the door is removed and reinstalled in the closed position this will lead to destruction of the self closing mechanism on the first open ing of the door 8
- Warning 8
- If the door is installed in the closed position this will lead to destruction of the self closing mechanism on the first opening and closing of the door 9
- Important 9
- It is essential that the door is open at an angle of 90 during installation 9
- Note on point 12 9
- Warning 9
Похожие устройства
- Brema TM 450A Инструкция по эксплуатации
- Brema TM 450A Схема
- ПЕНЗМАШ ТММ-140 с дежой из углеродистой стали Инструкция по эксплуатации
- CAS NC-500 Инструкция по эксплуатации
- CAS DL-150 Инструкция по эксплуатации
- CAS DL-200 Инструкция по эксплуатации
- CAS LP-06 (v1.6) Инструкция по эксплуатации
- Animo OptiBean Инструкция по эксплуатации
- Robot Coupe MP 350 Ultra Инструкция по эксплуатации
- Robot Coupe MP 350 Ultra Сертификат
- Robot Coupe MP 350 Ultra Каталог оборудования Robot Coupe
- Robot Coupe R6 Инструкция по эксплуатации
- Robot Coupe R6 Брошюра
- Robot Coupe R6 Сертификат
- Robot Coupe R6 Каталог оборудования Robot Coupe
- Sirman C 9 VV Инструкция по эксплуатации
- Sirman C 9 VV Каталог оборудования Sirman (англ.)
- Robot Coupe CL55 380В с рычагом Инструкция по эксплуатации
- Robot Coupe CL55 380В с рычагом Каталог оборудования Robot Coupe
- Electrolux Professional W4105H (9867710091) Инструкция по эксплуатации