Castel MAC E15-40 P Инструкция по эксплуатации онлайн [17/32] 272676

.6 BLAST FREEZING BY TEMPERATURE

• To select this cycle, press push-button 4 (relative LED lights up), then press push-but-

ton 5 to select the temperature mode (LED 5A on). Insert the core probe into

the core of the product to be chilled.

• Start up the cycle by pressing push-button 6 . LED 5A and those relative to the push-

buttons pressed illuminate throughout the cycle, while LEDs 13 flash.

• The appliance proceeds to operate in the same way as that described for the positive chill-

ing cycle. During this cycle the compressor operates in continuous mode to enable the

appliance to reach the cycle end temperature in the shortest time possible (default temper-

ature at product core is set at -18°C). Maximum freezing time is 240 minutes.

• The alarm (ALL 14) for excessively-long freezing and conservation functions cut in with rel-

ative indicators in the same way as for timed Soft blast chilling. The factory setting for neg-

ative storage temperature is -25°C.

• LEDs illuminate and the beep is activated when the cycle is finished (as in the soft chilling

cycle by temperature). The same applies for the storage function.

Press push-button 6 to set the appliance to STOP status (relative LED switches off),

ready for a new cycle.

5.7 TIMED BLAST FREEZING

• Press push-button 4 (relative LED lights up), then press push-button 5 to select

the timer mode (LED 5B on). Display 15 shows the maximum chilling time (set by

default to 240 minutes).

To modify this time, press push-buttons 7 and 8 (time in minutes).

• Start up the cycle by pressing push-button 6 . LED 5B and push-button LEDs remain

on and LEDs 13 flash throughout the cycle.

Internal cell temperature is shown on display 16 .

• When the maximum chilling time has counted back to 0, the cycle is completed and the

appliance automatically switches to the set negative storage temperature for an indefinite

interval.

LEDs illuminate and the beep is activated when the cycle is finished (as in the freezing cycle

by temperature). The same applies for the storage function. The factory setting for negative

storage temperature is -25°C.

• Press push-button 6 to set the appliance to STOP status (relative LED switches off),

ready for a new cycle.