Smeg CT15PO-9 [17/17] Instructions for the installer

GB-IE

Instructions for the Installer

1818

10.3 Electrical connection

Electrical installation must be performed by an electrician qualified in

accordance with the legislation in force.

Before connecting the warming drawer to the electric mains, check that

the voltage and frequency of the mains matches that which is shown on

the rating plate located in the heating block inside, which should be kept

together with this manual.

The electric connection is made via an omnipolar switch, which is suitable

for the intensity to be tolerated and which has a minimum gap of 3mm

between its contacts, which will ensure disconnection in case of

emergency or when cleaning the warming drawer. If a plug is used for the

electric connection, then it must be accessible after installation.

The connection should include correct earthing, in compliance with current

norms.

WARNING: THE WARMING DRAWER MUST BE EARTHED.

If the flexible supply cable fitted to the warming drawer ever needs to be

changed, it should be replaced by an official After Sales Service.

The manufacturer and retailers do not accept responsibility for any

damage that may be caused to people, animals or property if these

installation instructions are not observed.