![Liebherr GGPv 1490 [11/13] A14 0 min p alarm delay](/img/pdf.png)
Liebherr GGPv 1490 [11/13] A14 0 min p alarm delay
![Liebherr GGPv 1470 [11/13] A14 0 min p alarm delay](/views2/1322416/page11/bgb.png)
23
Adjusting the alarm delay
>
A14= 0 Min.
P Alarm Delay
>
A14= 0 Min.
0 Min.
Use buttons and to select the desired setting.
Save by pressing the
button.
Return to the standard indication by pressing the
button.
Note
When in standard display mode, it is possible to switch between
product sensor, standard temperature sensor, both sensors and
date/time using the
button.
>
Frozen food
Product - - °C
>
Frozen food
Temp. - - °C
>
Temp. - - °C
Product - - °C
>
DD/MM/YY
hh:mm:ss
GB
ashes
Cleaning
Clean the appliance at least twice per year.
Before cleaning always switch o the appliance. Pull out
the mains plug or switch o or unscrew the fuse.
• Empty the appliance and store the food in a cool place.
• Clean the inside and equipment with lukewarm water and a lit-
tle detergent. Do not use abrasive or acid cleaners or chemical
solvents.
Do not use steam cleaners because of the
risk of injury and damage.
• Ensure that no cleaning water penetrates into the electrical
components or ventilation grille.
• Dry all parts well with a cloth.
• Use a commercially available stainless-steel cleaning agent for
stainless-steel appliances.
Do not use abrasive sponges or scourers, do not use con-
centrated cleaning agents and never use cleaning agents
containing sand, chloride or acid or chemical solvents, as
these would damage the surfaces and could cause corro-
sion.
Malfunctions
You may be able to rectify the following faults by checking
the possible causes yourself:
• Appliance does not function:
– Is the appliance switched on?
– Is the plug correctly fitted in the mains socket?
– Is the fuse intact?
• The temperature is not low enough:
– Is the temperature setting correct (see "Setting the tempera-
ture")?
– Have excessive amounts of fresh food been placed in the appli-
ance?
– Does the separately installed thermometer show the correct
reading?
– Is the ventilation system working properly?
– Is the appliance set up too close to a heat source?
If none of the above causes
apply and you cannot rectify
the fault yourself, contact the
nearest customer service de-
partment stating the type desig-
nation
1, service number 2
and appliance number
3 as
indicated on the type plate.
The position of the type plate
is shown in the section entitled
Description of the appliance.
Shutting your appliance down
If your appliance is to be shut down for any length of time, switch
it o and disconnect the plug or switch o or unscrew the fuse.
Clean the appliance and leave the door open in order to prevent
unpleasant smells.
The appliance complies with the relevant safety regulations and
EC Directives 2004/108/EC and 2006/95/EC.
Cleaning the dust lter
Clean the dust lter at least twice
per year!
Remove the plug!
1. Remove the dust lter by
lifting upwards.
2. Clean the dust lter with
water and detergent.
3. Reinstall the dust lter.
Содержание
- 263 01 1
- Operating instructions 1
- Content 2
- Description of the appliance 2
- Ggpv 1490 ggpv 6590 2
- Stacking mark 2
- Appliance dimensions 4
- Climate rating 4
- Do not cover ventilation open ings or grille 4
- Do not operate the appliance outside the specified room temperature range 4
- Do not set the adjustable foot to a height greater than 170 mm the bottom section of the adjustable foot can become loose and the ap pliance may then tip over 4
- Electrical connection 4
- Range of appliance use 4
- Setting up 4
- The appliance is suited only for cooling food 4
- The height of the foot can be adjusted from 120 mm to 170 mm 4
- The socket must not be situated behind the appli ance and must be easily accessible 4
- This can lead to serious or even fatal injuries 4
- Warning 4
- Equipment 5
- Button 6
- Dd mm yy hh mm ss 6
- Frozen food temp c 6
- Keypad lock 6
- Language english 6
- Menu 01 setpoint 6
- Menu 06 settings 6
- Operating and control elements 6
- Setting the language 6
- Settings 01 service 6
- Settings 02 language 6
- Switching the appliance on and off 6
- Main menu 7
- Menu 01 7
- Menu 01 setpoin 7
- Menu 01 setpoint 7
- Menu 03 7
- Menu 03 defrostin 7
- Menu 03 defrosting 7
- Menu 04 7
- Menu 04 program 7
- Menu 04 programs 7
- Menu 05 7
- Menu 05 alarm 7
- Menu 06 7
- Menu 06 settings 7
- New set c current c 7
- P12 frozen food 7
- P12 set 20 c frozen food 7
- P13 ice cream 7
- P14 ice cream scoop 7
- Start defrosting no ok 7
- A01 door open e hh mm dd mm yy 8
- A01 door open s hh mm dd mm yy 8
- A01 door open temp max c 8
- Alarm test 8
- All power cut temp c 8
- Calling up the saved alarm events 8
- Door open temp c 8
- High temp room temp c 8
- Menu 01 setpoint 8
- Menu 05 alar 8
- Menu 05 alarm 8
- Menu 06 settings 8
- The following alarm can be rectified immediately 8
- The following alarm events require the stored items to be checked 8
- D03 0 0 9
- D03 0 1 9
- D03 0 backlight on 9
- Date dd mm yy hour hh mm ss 9
- External alarm 9
- Menu 01 setpoint 9
- Menu 06 setting 9
- Menu 06 settings 9
- Settings 01 service 9
- Settings 02 language 9
- Settings 03 clock setting 9
- Settings 06 display 9
- The appliance may only be connected to an ex ternal alarm device by trained personnel 9
- A12 45 c 45 c 10
- A12 45 c p low alarm 10
- A13 45 c 45 c 10
- A13 45 c p high alarm 10
- Adjusting the alarm limits 10
- Frozen food product c 10
- Menu 01 setpoint 10
- Menu 06 settings 10
- Product sensor 10
- Product sensor settings 10
- Remove the plug 10
- Sensor check off 10
- Sensor check on 10
- Settings 01 service 10
- Settings 09 alarm setting 10
- A14 0 min 0 min 11
- A14 0 min p alarm delay 11
- Cleaning 11
- Dd mm yy hh mm ss 11
- Do not use steam cleaners because of the risk of injury and damage 11
- Frozen food product c 11
- Frozen food temp c 11
- Malfunctions 11
- Shutting your appliance down 11
- Temp c product c 11
- Changing over door hinges ggpv 6590 12
- If the door is removed and reinstalled in the closed position this will lead to destruction of the self closing mechanism on the first open ing of the door 12
- Warning 12
- Warning 13
Похожие устройства
- Liebherr GGPv 6590 Инструкция по эксплуатации
- Liebherr GKPv 1470 Инструкция по эксплуатации
- Liebherr GGv 5860 Инструкция по эксплуатации
- Liebherr LGT 2325 Инструкция по эксплуатации
- Liebherr LGT 2325 Каталог оборудования Liebherr (англ.)
- Liebherr LGT 4725 Инструкция по эксплуатации
- Liebherr LGT 4725 Каталог оборудования Liebherr (англ.)
- Liebherr LGT 3725 Инструкция по эксплуатации
- Liebherr LGT 3725 Каталог оборудования Liebherr (англ.)
- TEFCOLD FR605/R600 Инструкция по эксплуатации
- TEFCOLD SE20-45 Инструкция по эксплуатации
- TEFCOLD BA25H-I Инструкция по эксплуатации
- Scan SD 76 Инструкция по эксплуатации
- Scan SD 76 Схема
- TEFCOLD SC85-I Инструкция по эксплуатации
- CAS NC-100 Инструкция по эксплуатации
- CAS Caston-I 1 THA Инструкция по эксплуатации
- CAS Caston-I 3 THA Инструкция по эксплуатации
- CAS Caston-I 5 THA Инструкция по эксплуатации
- CAS NC-200 Инструкция по эксплуатации