Liebherr GGPv 1490 [12/13] Warning

Changing over door hinges GGPv 6590

Door hinges should only be changed by a trained expert.

Changing the door hinges must be done by two people.

4. Remove the hinge components from the hinge bracket.

1. Open door by about 90°.

Important note

The door must be opened 90°

before the lower hinge bracket

is removed.

This will hold the self-closing

mechanism that is integrated into

the door in the required position for

installation.

WARNING!

If the door is removed and reinstalled in the

closed position, this will lead to destruction of

the self-closing mechanism on the rst open-

ing of the door.

Important

As a result of its heavy weight, the door

must be held secure by one person.

2. Remove hinge bracket.

Pull the door out at the

bottom and lift off.

Bearing ring

Brass washer

Hinge bushing

Plastic washer

Note on point 4

The hinge bushing with brass washer and bear-

ing ring may stick in the door mounting when

you pull out the hinge bracket and, in this case,

must be removed from it.

3. Remove bearing ring from

upper door mounting.

7. Insert the bearing ring and

hinge bushing in the upper

door mounting.

5. Transfer the upper hinge bracket and covers to the

opposite side.

6. Turn the door by 180°.