Dunavox DX-24.56BBK (В) [9/24] Accessory installation before operation

ACCESSORY INSTALLATION BEFORE OPERATION

UNPACKING AND CLEANING THE WINE COOLER

•

Remove the exterior and interior packing materials.

•

Let the appliance stand upright for approximately

24 hours

before connecting it to the power source, which

helps to reduce the possibility of a cooling-system malfunction from movement during transport.

•

Use a soft cloth to clean the interior surface with lukewarm water.

•

Install the door handle provided with the appliance by following these steps:

-Remove the rubber gasket on the door

to expose the two screw holes.

-Install the handle with the

screws and washers provided.

-Replace the gasket by pressing into place.

LOCK & UNLOCK THE DOOR (OPTIONAL)

•

A Lock is optional . If your Wine Cooler has a lock, a key should be attached inside the packing of this

Manual.

•

Insert the key into the lock and turn it counter-clockwise to unlock the door. To lock it, please follow the

revers operation. Please save the key.

OPERATING THE WINE COOLER

WORKING CLIMATE

•

The appliance is designed for operating from SN to N climate (see below climate class chart). It is

recommended to maintain the ambient around 22-25°C which helps the appliance working with less power

consumption.

Climate Class Ambient Temperature

SN 10 - 32 °C (50ºF-90ºF)

N 16 - 32 °C (61ºF-90ºF)

ST 18-38 °C (64ºF-100ºF)

T 18-43 °C (64ºF-109ºF)

•

If the ambient temperature is above or below the designed climate range, the performance of the unit may

be affected. For example, the appliance operating in extreme cold or hot conditions may cause interior

temperatures to fluctuate, and the internal temperature set 5-22°C may not be reached.