Mitsubishi Electric PCA-RP125KAQ / PUHZ-P125VHA [12/31] Care and cleaning

Mitsubishi Electric PCA-RP140KAQ / PUHZ-ZRP140YKA [12/31] Care and cleaning

PKA-RP·HAL

1 Pull both the bottom corners of the intake grille to open the grille, then lift the

ﬁ lter.

6. Care and Cleaning













1 Open the intake grille.

2 Hold the knob on the ﬁ lter then pull the ﬁ lter up in the direction of an arrow. To

replace the ﬁ lter after cleaning, be sure to insert the ﬁ lter far enough until it ﬁ ts

into the stopper.

A Filter B Intake Grille C Knob D Stopper

RP71 → 3 pieces

RP125 → 4 pieces

►Cleaning the oil ﬁ lter (PCA-RP·HAQ Series)

1) Removing the oil ﬁ lter

1 Remove the ﬁ lter by sliding it in the direction of an arrow.

2) Replacing the ﬁ lter element

1 Remove the oil ﬁ lter by sliding it in the direction of an arrow.

2 Remove the two metal ﬁ ttings for ﬁ lter element according to the following proce-

dure. Bend the metal ﬁ ttings towards

1 side (inside) and then slide them in the

direction of 2 to remove.

3 Replace the ﬁ lter element (disposable).

Optional parts: PAC-SG38KF (12 pieces)

Note:

Install the ﬁ lter element within the frame securely.

4 Install the metal ﬁ ttings for ﬁ lter element in their original positions.

5 Turn the side of oil ﬁ lter that the metal ﬁ ttings are installed downward and install

the ﬁ lter in the unit.

A Handle C Filter element

B Oil ﬁ lter D Metal ﬁ tting for ﬁ lter element

3) Cleaning the frame of the oil ﬁ lter

Tools to be prepared

• Protective goods such as a rubber glove

• Scrubbing brush or brush

Note:

Avoid using a metal scrubbing brush or brush since the aluminum materials

could be damaged.

• Household neutral detergent or alkalescent detergent (for washing dishes or

clothes)

Note:

If alkaline detergent is used for cleaning, the part made of aluminum could

discolor.

Note:

Make sure the ﬁ lter element is removed when cleaning the oil ﬁ lter.

1 If the ﬁ lter is not so dirty. (If the ﬁ lter is cleaned once a week (once per 100 oper-

ating hours).)

Wash the ﬁ lter with water and above-mentioned detergent using a scrubbing brush

or brush, etc. (It is more effective to wash the ﬁ lter with lukewarm water.)

2 If the ﬁ lter is extremely dirty.

Put the previously-mentioned detergent (its strength should be about 1/10 of un-

diluted solution) into hot water whose temperature is 50 °C or less, and soak the

ﬁ lter for 1 hour or more before washing.

Warning:

To prevent your hand from burning, start washing the ﬁ lter after the hot water

gets cold.

Cleaning the indoor unit

• Wipe the outside of the unit with a clean, dry, soft cloth.

• Clean off any oil stains or ﬁ nger marks using a neutral household de-

tergent (such as dishwashing liquid or laundry detergent).

Caution:

Never use gasoline, benzene, thinner, scouring powder or any type

of non-neutral detergent, as these substances may damage the

unit’s case.

■ PCA-RP·HAQ

■ PCA-RP·KAQ

Mitsubishi Electric PCA-RP125KAQ / PUHZ-P125VHA [12/31] Care and cleaning

Содержание

Похожие устройства