Lelit Anna PL41ЕМ [5/24] English

Pag. 5

English

DESCRIPTION:

1. Cold water tank

2. Cup warmer

9. Single cup filter

10. Two cup filter

11. On/off switch

12. Steam switch

19. Removable water tank cover

20. Water level indicator

USER INSTRUCTIONS:

Starting of the machine:

1. Remove the machine from its packing and make sure all packing parts have been taken off (including the

protection bags).

6. Plug in the machine in the mains. Make sure that the wall socket is of the right voltage.

7. Place the filter holder under the brewing group (5) and turn it from the left to the right. Leave it there so that

it can get warm and it gets ready for use.

8. Turn the machine on by pushing the on /off switch (11). The indicator light: machine on (14) comes on to

confirm the power supply.

9. Open the steam/hot water knob (4).

10. Press the steam switch (12) and the coffee/hot water switch (13).

11. When water comes out of the steam spout (6), press the coffee/hot water switch (13) and the steam switch

(12) again and close the steam/hot water knob (4).

12. After completing all these operations, leave the machine on.

15. As soon as the indicator light steam ready (3) goes on, the machine is ready for use (the indicator light steam

ready goes off on the mod. PL41EAUS/PL41EMAUS). Fit the single cup filter (9) or the two cup filter (10) into

the filter holder (8) that has been warmed up by leaving it attached to the brewing group as described in point

4.

16. Fill the filter with the ground coffee by means of the supplied measure spoon (16): 1+ ½ measuring spoonful

(16) = 1 coffee cup - 3 measuring spoonful (16) = 2 coffee cups. Every time you fill the filter with a spoonful

of coffee, press the coffee with the coffee press (15) before proceeding to fill it with the next spoonful and

make sure that there are no coffee rests on the filter border.

17. Insert the filter holder (8) in the brewing group ring (5), turn it from left to right with force, then put the cup

on the removable water drainage tray (7).

Preparing an espresso with the use of coffee pods:

21. Check that the water tank (1) has been filled in with water by looking at the water level indicator (20).

22. Press the on/off switch (11): the indicator light “machine on” (14) will come on. Do this operation only if the

machine is off. If it’s on pass to the following point.

23. As soon as the indicator light: steam ready (3) goes on, the machine is ready for use (the indicator light

steam ready goes off on the mod. PL41EAUS/PL41EMAUS).

24. Fit the pod filter(18) into the filter holder (8) that has been warmed up by leaving it attached to the brewing

group as described in point 4.

25. Open the single packed pod not damaging the pod.

26. Place the pod in its filter (18).