Menumaster JET519V2 [15/15] Before calling for service

PROBLEM Possible Cause

Oven does not operate.

Conrm oven is plugged into dedicated circuit.

Conrm oven is on grounded circuit.

(Contact electrician to conrm)

Check fuse or circuit breaker.

Oven operates intermittently or

HOT shows in display.

Check air lter and discharge areas for obstructions.

If oven does not accept entries

when pad is pressed.

Make sure oven is on and preheated.

Open and close oven door. Press pad again.

If oven malfunctions or shows:

ERROR!

Error Code: 1

(example)

Oven control is equipped with a self-diagnostic system. Self-diagnostic

system alerts you if there is an error or problem. When electronic control

signals a problem, follow steps listed below.

1. Record number shown. (example of Error Code: 1 shown)

2. Unplug oven, wait for 1 minute, and plug in oven.

• Disconnecting electrical supply may eliminate service code. If failure

continues, contact an authorized servicer.

Oven fan turns on while oven is

not preheating or cooking.

Normal operation.

 2016 ACP, Inc

225 49th Avenue Drive

Cedar Rapids, IA 52404

Part No. 20000606

Printed in U.S.A. Rev 6/16

Before Calling for Service

WARNING

To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time.

Only an authorized servicer should remove outer case.

For full product documentation visit:

www.acpsolutions.com