![Hytera PD-705G [20/22] Troubleshooting](/img/pdf.png)
Hytera PD-705G [20/22] Troubleshooting
![Hytera PD-705G [20/22] Troubleshooting](/views2/1033639/page20/bg14.png)
15
Troubleshooting
Phenomena Analysis Solution
The radio can not be powered on.
The battery may be improperly installed. Remove the battery and attach it again.
The battery may run out. Recharge or replace the battery.
The battery may suffer from poor contact caused by dirtied
or damaged battery contacts.
Clean the battery contacts. If the problem can not be
solved, contact your dealer or authorized service center for
inspection and repair.
During receiving signals, the voice
is weak, discontinuous or totally
inactive.
The battery strength may be too low. Recharge or replace the battery.
The volume may be set to a low level. Increase the volume.
The antenna may get loose or may be improperly installed. Power off the radio, and re-install the antenna.
The speaker may be blocked or damaged.
Clean surface of the speaker. If the problem can not be
solved, contact your dealer or authorized service center for
inspection and repair.
You can not communicate with
other members.
The frequency or signaling may be inconsistent with that of
other members.
Set your TX/RX frequency and signaling to the same as that
of other members.
The channel type (digital/analog) may be set inconsistently.
Make sure all members are on the same digital/analog
channel.
You may be too far away from the group members. Move towards other members.
Irrelevant communication or noise
is heard on the channel.
You may be interrupted by radios using the same frequency. Change the frequency, or adjust the squelch level.
The radio may be set with no signaling.
Set signaling for all member radios to avoid interference at
the same frequency.
The noise is too loud.
You may be too far away from other members. Move towards other members.
You may be at an unfavorable position. For example,
your communication may be blocked by high buildings or
frustrated in the underground areas.
Move to an open and at area, and restart the radio.
You ma y s u ff er f r om e xte r nal di stu r ban ce ( s uch as
electromagnetic interference).
Stay away from equipment that may cause interference.
The GPS c a nn ot locat e y ou r
position.
No GPS signal is received. Move to an open and at area, and restart the radio.
If the above solutions can not x your problems, or you may have some other queries, please contact us or your local dealer for more technical
support.
Содержание
- D03207 f03152 1
- Dmr portable radio 1
- Owner s manual 1
- Page 1 1
- Preface 2
- Alert icons 3
- All call 3
- Copyright information 3
- Function icons 3
- Group call 3
- Instructional icons 3
- Key operation 3
- Private call 3
- Squelch 3
- Term explanation 3
- Disclaimer 4
- Fcc regulations 4
- Operational instructions and training guidelines 4
- Rf radiation information 4
- Rf radiation profile 4
- Rf radiation safety 4
- Eu regulatory conformance 5
- Basic operations 7 6
- Before use 5 6
- Call 8 6
- Checking items in the package 2 product overview 3 6
- Contents 6
- Functions and operations 9 6
- Status indication 7 6
- Troubleshooting 15 care and cleaning 16 optional accessories 17 6
- Checking items in the package 7
- Product controls 8
- Product overview 8
- Product overview 9
- Programmable keys 9
- Before use 10
- Charge diagram 10
- Charge indicator 10
- Charging the battery 10
- Procedures 10
- Assembling the accessories 11
- Attaching the antenna 11
- Attaching the audio accessory programming cable 11
- Attaching the battery 11
- Attaching the belt clip 11
- Before use 11
- Adjusting the volume 12
- Basic operations 12
- Led indicator 12
- Selecting a channel 12
- Selecting a zone 12
- Status indication 12
- Switching the channel mode 12
- Turning the radio on off 12
- All call 13
- Calls on analog channels 13
- Group call 13
- Private call 13
- Receiving an all call 13
- Receiving and responding to a group call 13
- Receiving and responding to a private call 13
- Transmitting a group call 13
- Transmitting a private call 13
- Transmitting an all call 13
- Adjust power level 14
- Functions and operations 14
- Monitor 14
- Talk around 14
- Emergency 15
- Emergency id type 15
- Emergency mode 15
- Emergency type 15
- Functions and operations 15
- Squelch off 15
- Alarm none hdc1200 16
- Alarm with call none hdc1200 16
- Functions and operations 16
- Operation methods for analog emergency 16
- Adjust squelch level 17
- Call only 17
- Call only hdc1200 17
- Functions and operations 17
- Operation method for digital emergency 17
- Battery power indicator 18
- Busy channel lockout 18
- Encrypt 18
- Functions and operations 18
- Man down optional 18
- Scrambler 18
- Functions and operations 19
- Mic agc 19
- Pseudo trunking 19
- Time out timer tot 19
- If the above solutions can not fix your problems or you may have some other queries please contact us or your local dealer for more technical support 20
- Troubleshooting 20
- Care and cleaning 21
- Product care 21
- Product cleaning 21
- Optional accessories 22
Похожие устройства
- BBK STB105A Инструкция по эксплуатации
- Electrolux ESL 459 Инструкция по эксплуатации
- Gorenje EC 57341 AX Инструкция по эксплуатации
- Philips HR 1613/00 Инструкция по эксплуатации
- Hytera RD-985 Инструкция по эксплуатации
- Samsung P803J Инструкция по эксплуатации
- Gorenje EC 55 CLI Инструкция по эксплуатации
- Philips HR 1363/00 Инструкция по эксплуатации
- Hytera TC-518 Инструкция по эксплуатации
- Panasonic TX-34P180T Инструкция по эксплуатации
- Gorenje EC 55 CLB Инструкция по эксплуатации
- Philips HR 1611/00 Инструкция по эксплуатации
- Icom IC-F110 Инструкция по эксплуатации
- Konica Minolta Dimage Z5 Инструкция по эксплуатации
- Gorenje EC 52303 ABR Инструкция по эксплуатации
- Philips HR 1617/00 Инструкция по эксплуатации
- Icom IC-F210 Инструкция по эксплуатации
- BBK ABS524U Инструкция по эксплуатации
- Bernina Bernette E66 Инструкция по эксплуатации
- Gorenje EC 55320 RBR Инструкция по эксплуатации
Скачать
Случайные обсуждения