Lincat DF7pFL Инструкция по эксплуатации онлайн [10/17] 280959

IS356 ECN3592 10

tap by moving the handle (Fig 2, 6) to the right to drain. Remove the pipe and fit into its storage position

in the lid. Replace the blanking nut and close the tap before refilling the tank.

3) Take care when draining the oil that the drain bucket is not filled so full that it is difficult to handle.

4) Excess oil remaining in the base of the tank can be mopped up using kitchen paper.

CLEANING INSTRUCTIONS

Note: Clean the appliance with hot water and a mild detergent do not use abrasives.

In extreme conditions a branded cleanser such as “Carb „n‟ off ” makes cleaning easier after an

overnight application.

1) Isolate the appliance from the gas supply.

2) Allow the oil to cool to a maximum 55

3) Drain as per above instructions.

4) Wash the tanks and the top surface of the fryer body.

5) Clean the drain tube assembly, using a tube or flue brush suitable for 15mm tube, with the drain valves in

the open position. Clean by inserting the brush into both the inlet and outlet of the drains.

6) Wash all parts thoroughly.

7) Ensure all parts are thoroughly rinsed and dried. To ensure there is no water left in the drain tube, flush

thoroughly with a small amount of clean cooking oil.

8) Re-assemble by reversing the above procedure.