Lincat DF7pFL Инструкция по эксплуатации онлайн [12/17] 280959

IS356 ECN3592 12

6. Remove the nuts holding the drain tap to the drain tap bracket. Lift out safety lock arms. Undo the limit

stat nuts and free the limit stats. Disconnect limit stat wiring to interrupted t/couples. Disconnect control

stat wiring.

7. Unscrew flue at back. Body and hob are interlocked by 3 formed steel hook and slots each side – to

separate, push hob top back until hooks disengage, and then lift hob and tank assembly clear of base and

sides.

8. Take care, as the limit thermostat and safety stat will remain attached to hob top – do not damage

capillaries.

9. Carry out any work necessary and reassemble in the reverse order of 1-7 above.

Pilot Assembly.

To access the pilot assembly, firstly remove the control panel as per Step 4 above. Either pilot assembly can

then be lowered through the base of the unit by unscrewing the appropriate pilot box from beneath the unit,

and loosening the pilot pipe at the valve joint. Carefully remove the pilot box - all pilot components can then

be accessed.

Thermocouple.

1. Loosen retaining nut at valve.

2. Loosen retaining nut at pilot assembly.

3. Disconnect cabling from the interrupter.

4. Withdraw thermocouple from pilot assembly.

5. Replace as above in reverse order.

Thermopile

1. Disconnect thermopile lead at valve.

2. Loosen retaining nut at pilot assembly

3. Withdraw thermopile from pilot assembly.

4. Replace as above in reverse order.

Limit Thermostat.

1. Loosen tank gland.

2. Remove drain valve safety latch.

3. Loosen limit thermostat nut and withdraw from bracket. Disconnect wiring.

4. Withdraw probe from tank

5. Thermostat can now be removed.

6. Replace as above in reverse order.

Control Valve

1. Disconnect all wire connections on valve terminals.

2. Disconnect interrupted thermocouple from valve.